Description
Pfeiffer PM 011 232-X Turbo Pump Controller Cable Multi-Pin Connector
The Pfeiffer PM 011 232-X is an OEM controller cable designed to connect a Pfeiffer turbomolecular pump to its companion controller unit. One end terminates in a large multi-pin circular connector that mates with the pump body, while the other end uses a D-sub style multi-pin connector that plugs into the controller — carrying power, control signals, and pump status data between the two units. A yellow caution label is affixed to the controller-end connector.
Specifications & What's Included
- Part Number: PM 011 232-X
- Manufacturer: Pfeiffer Vacuum
- Type: Turbo pump controller interface cable
- Pump-end connector: Multi-pin circular connector (large format, locking ring)
- Controller-end connector: D-sub multi-pin connector with caution warning label
- Cable jacket: Gray, flexible, multi-conductor
- Approximate length: Several feet (coiled in photos — review photos for scale)
- Cable only — no additional accessories included
Applications
Pfeiffer Vacuum is a leading German manufacturer of turbomolecular pumps and vacuum systems widely used in semiconductor fabrication, thin-film deposition, electron microscopy, mass spectrometry, and general high-vacuum research. The PM 011 232-X cable is the interface link between the turbomolecular pump head and its electronic controller, carrying both the drive power and feedback signals that allow the controller to spin the pump rotor to operating speed and monitor its status. Replacement or spare cables like this one are commonly needed when expanding a vacuum system, relocating pump and controller hardware, or replacing a damaged OEM cable. This cable is compatible with Pfeiffer turbomolecular pump and controller combinations that use this connector configuration — buyers should verify compatibility with their specific pump and controller model before purchasing.
This Pfeiffer PM 011 232-X Turbo Pump Controller Cable is in used condition. It has been visually inspected and photographed. The cable appears intact with no visible cuts, kinks, or damage to the jacket. Both connectors — the multi-pin circular pump-end connector and the D-sub controller-end connector with its caution label — are present and show normal handling wear consistent with prior use in a vacuum system. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
Pfeiffer Vacuum |
Model: |
PM 011 232-X |
MPN: |
PM 011 232-X |
SKU: |
14914 |
Type: |
Turbo Pump Controller Cable |
Compatible With: |
Pfeiffer turbomolecular pump controllers |
Connector 1: |
Multi-pin circular connector (pump end) |
Connector 2: |
D-sub multi-pin connector (controller end) |
Seller Notes: |
Cable only — no additional accessories included. |
Country/Region of Manufacture: |
Germany |
Application: |
Turbomolecular pump to controller interface |
Form Factor: |
Cable |
Condition Notes: |
This Pfeiffer PM 011 232-X Turbo Pump Controller Cable is in used condition. Visually inspected — cable jacket is intact, both connectors present and show normal wear. Not electrically tested. Please view photos and contact us with questions. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |