null
Omron

Omron CRS1-RPT01 CompoNet Network Power Supply Repeater 24V DC 5A DIN Rail

(No reviews yet) Write a Review
SKU:
53211
MPN:
CRS1-RPT01
Condition:
Used
Availability:
Usually ships within 1-2 business days.
Weight:
3.00 LBS
Shipping:
Calculated at Checkout
  • Omron CRS1-RPT01 CompoNet Network Power Supply Repeater – angled top view showing PORT1, PORT2 connectors and green screw terminal power input
  • Omron CRS1-RPT01 CompoNet Repeater – top-down view showing RPT node address rotary switches, MS NS status indicators, and PORT1 PORT2 network connectors
  • Omron CRS1-RPT01 – side label view showing CompoNet logo, communication power and network power supply ratings, lot number, and Made in China marking
  • Omron CRS1-RPT01 CompoNet Repeater – end view showing PORT2 connector and green screw terminal block on top
  • Omron CRS1-RPT01 – bottom view showing yellow DIN rail latch and CRS1-RPT01 label
  • Omron CRS1-RPT01 – opposite end view showing PORT1 connector and network power supply terminal block
  • Omron CRS1-RPT01 CompoNet Network Power Supply Repeater – top-down reverse view showing PORT1, PORT2, RPT node address dial, and MS NS indicators
$80.00
Was: $150.00
Current Stock: 1

Sold Out

Description

Omron CRS1-RPT01 CompoNet Network Power Supply Repeater 24V DC 5A DIN Rail

This is a CompoNet network repeater that extends power and communication across Omron CompoNet systems. It supplies 24V DC power at 5A to network devices and repeats communication signals across two network ports.

Specifications & What's Included

  • Input: 24V DC
  • Network Power Supply Output: 24V DC, 5A
  • Communication Power: 24V DC, 0.05A
  • 2 CompoNet Network Ports (PORT1, PORT2)
  • Node Address Range: 0–63 (x10 and x1 rotary switches)
  • Status Indicators: MS, NS LEDs
  • DIN Rail mounting with green screw terminal block
  • CE certified, China manufactured

Applications

This repeater is used in Omron CompoNet industrial automation networks to extend signal reach and power distribution across multiple nodes. It is compatible with Omron CRT1 series controllers and other CompoNet devices. Repeaters are typically deployed in large distributed control systems where nodes exceed standard network cable distances.

Please note: We may have multiple units of this item in stock. The unit you receive may vary slightly from the one shown in the photos. All units are functionally equivalent and inspected to the same standard.

Condition: Used
This Omron CRS1-RPT01 CompoNet Network Power Supply Repeater was removed from a large controller system and is in good used condition. The housing is intact with normal handling marks consistent with industrial service. The green screw terminal block, PORT1 and PORT2 network connectors, and DIN rail latch are all present and appear undamaged. The unit label, node address rotary switches, and status indicators are clearly visible and in good shape. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Omron
Model:
CRS1-RPT01
MPN:
CRS1-RPT01
Type:
CompoNet Network Power Supply Repeater
SKU:
53211
Input Voltage:
24V DC
Network Power Supply Output:
24V DC, 5A
Communication Power:
24V DC, 0.05A
Network:
CompoNet
Number of Network Ports:
2 (PORT1, PORT2)
Node Address Range:
0–63 (x10 and x1 rotary switches)
Mounting:
DIN Rail
Form Factor:
DIN Rail Module
Indicators:
MS, NS status LEDs
Power Input Connector:
Green screw terminal block (BS+, BS-)
Country/Region of Manufacture:
China
Compatible With:
Omron CompoNet systems, CRT1 series
Certifications:
CE
Seller Notes:
Unit only; removed from a large controller system.
Condition Notes:
Omron CRS1-RPT01 CompoNet Network Power Supply Repeater removed from a large controller system. In good used condition with normal wear. Housing, ports, terminal block, and DIN rail latch all intact. Please contact us with any questions.
View AllClose

Related Products

Related Products

Microcomputer Power CP129 power supply – rear panel view showing IEC power inlet, rocker switch, output connector J1, and indicator lights Microcomputer Power CP129 power supply – side view showing output transistors, transformer, and attached cooling fan with cracked housing
Add to Cart
Quick view

Microcomputer Power CP129 Vintage Power Supply 115/230V 5V 12V 24V DC Multi-Rail

Microcomputer Power

$112.00
Was: $225.00
Microcomputer Power CP129 Vintage Power Supply 115/230V 5V 12V 24V DC Multi-Rail This is a standalone multi-rail DC power supply from Microcomputer Power, model CP129. It converts 115/230 VAC input...
18199
SKU:
18199
Availability:
Usually ships within 1–2 business days.
Weight:
16.00 LBS
Brand:
Microcomputer Power
Model:
CP129
MPN:
CP129
SKU:
18199
Condition:
Used – Inspected and Tested
Seller Notes:
Fan housing is cracked; fan is functional. Unit tested working.
Country of Manufacture:
USA
Form Factor:
Standalone / External Box
AC Input Voltage:
115/230 VAC ±10%, 47–63Hz
Power Rating:
460 VA
DC Output 1:
5VDC at 9A (OVP at 6.2 ±0.4VDC)
DC Output 2:
24VDC at 2A avg, 4A peak
DC Output 3:
12VDC at 0.5A
DC Output 4:
-12VDC at 0.5A
DC Output 5:
-5VDC at 3A (OVP at -6.2 ±0.4VDC)
Output Configuration:
Multi-rail: +5V, +24V, +12V, -12V, -5V DC
Fuse Rating:
4A/250V at 115VAC; 2A/250V at 230VAC
Output Connector:
Multi-pin edge/header connector (J1)
Power Switch:
Rocker on/off with indicator light
Compatible With:
Vintage microcomputer systems, legacy industrial equipment
Power Requirements:
115/230 VAC ±10%, 47–63Hz, 460VA
Condition Notes:
Microcomputer Power CP129 power supply tested and in working order. Fan operates; fan housing has a visible crack. Enclosure shows typical age wear. All output rails functional. Please contact us with any questions.