Omega

Omega Engineering RH-USB Relative Humidity Temperature Sensor USB 2-98% RH

(No reviews yet) Write a Review
SKU:
44077
MPN:
RH-USB
Condition:
Used
Availability:
Currently out of stock — contact us for availability.
Weight:
1.00 LBS
Shipping:
Calculated at Checkout
  • Omega Engineering RH-USB humidity temperature sensor probe front view with Techmaster Electronics calibration label and stainless steel perforated sensing cap
  • Omega RH-USB sensor probe rear view showing four-screw mounting flange and USB cable exit
  • Omega RH-USB sensor body label close-up showing model number, USB interface, and range 2-98% RH -17 to 49 Deg C, Omega Engineering Inc.
  • Techmaster Electronics calibration label on Omega RH-USB sensor showing I.D. No. 0906129 calibrated Nov-29-2011 due Nov-29-2012
  • Omega RH-USB sensor probe body open with stainless sensing cap removed, showing internal green PCB circuit board with connector pins
$100.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

Omega Engineering RH-USB Relative Humidity Temperature Sensor USB 2-98% RH

The Omega Engineering RH-USB is a combined relative humidity and temperature sensor with a direct USB interface, allowing connection to a PC without a separate data acquisition module or signal conditioner. The probe outputs digital data over USB and is compatible with Omega Engineering's data logging software. It features a stainless steel cylindrical probe body with a perforated stainless sensing cap that protects the internal humidity and temperature elements while allowing airflow to reach the sensors.

Specifications & What's Included

  • Model: RH-USB
  • Manufacturer: Omega Engineering Inc.
  • PC Interface: USB
  • Humidity Range: 2–98% RH
  • Temperature Range: -17 to 49°C (approximately 1 to 120°F)
  • Probe Body: Stainless steel cylindrical form factor
  • Sensing Cap: Perforated stainless steel, removable
  • Mounting: Panel/duct mount flange with four screws
  • Internal PCB: Green circuit board with connector pins visible (intact)
  • Calibrated by Techmaster Electronics, I.D. No. 0906129, Nov-29-2011 (calibration expired Nov-29-2012 — recalibration recommended)
  • Includes: Sensor probe with sensing cap, mounting flange, and attached USB cable

Applications

The RH-USB series is designed for environmental monitoring applications where relative humidity and temperature need to be measured and logged directly to a PC. Typical uses include HVAC performance verification, cleanroom and laboratory environmental monitoring, storage room compliance logging, and research data acquisition. The USB interface eliminates the need for a separate transmitter or analog input module — the probe connects directly to any USB-equipped computer and is recognized as a plug-and-play measurement device. Omega Engineering's RH-USB probes have been used in industrial, educational, and laboratory settings where a compact, self-contained humidity/temperature logger is needed without the overhead of a full data acquisition system. The duct/panel mounting flange allows permanent or semi-permanent installation in air ducts, enclosures, or wall panels.

Condition: Used
This Omega Engineering RH-USB Relative Humidity and Temperature Sensor was pulled from a working environment where it was previously in service. It has been visually inspected and is in good used condition. The probe body and stainless steel sensing cap show normal handling wear consistent with lab use. The sensing cap is removable — internal PCB and connector pins are visible and intact. A Techmaster Electronics calibration label is affixed showing calibration date of November 29, 2011, with a due date of November 29, 2012; recalibration is recommended before use in critical measurement applications. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Omega Engineering
Model:
RH-USB
MPN:
RH-USB
Type:
Relative Humidity and Temperature Sensor
SKU:
44077
PC Interface:
USB
Humidity Range:
2–98% RH
Temperature Range:
-17 to 49°C (1 to 120°F)
Measurement Parameters:
Relative Humidity, Temperature
Connector / Interface:
USB
Housing / Body:
Stainless Steel Probe with Perforated Sensing Cap
Mounting:
Panel / Duct Mount Flange with 4 Screws
Calibrated By:
Techmaster Electronics
Calibration Date:
Nov-29-2011
Calibration Due Date:
Nov-29-2012 (expired — recalibration recommended)
Country/Region of Manufacture:
United States
Compatible With:
Windows PC via USB; Omega Engineering data logging software
Form Factor:
Probe / Handheld
Seller Notes:
Includes sensor probe with stainless sensing cap, mounting flange, and USB cable.
Condition Notes:
This Omega Engineering RH-USB Humidity/Temperature Sensor was pulled from a working environment. Visually inspected; good used condition. Stainless sensing cap and probe body show normal wear.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose