Description
Omega Engineering FTB604 Turbine Flow Meter Sensor w/ Cable Barbed Fittings
The Omega Engineering FTB604 is an inline turbine (paddlewheel) flow meter designed for measuring liquid flow rates in piping systems. The sensor body houses a multi-blade paddlewheel rotor that spins in proportion to flow velocity; the rotation is detected magnetically and converted to a pulse or analog output via the attached cable. Barbed fittings on each end allow direct connection to flexible tubing without additional hardware.
Specifications & What's Included
- Brand: Omega Engineering
- Model: FTB604
- Series: FTB600
- Sensing Technology: Turbine / paddlewheel rotor
- Fitting Type: Barbed fittings (both inlet and outlet)
- Flow Direction: Indicated by directional arrows on sensor label
- Cable: Long multi-conductor gray cable with bare wire leads (approximately 6 ft visible in photos)
- Country of Manufacture: Netherlands (patented design per label)
- Includes: Flow meter sensor body with integral cable; yellow protective end caps on both fittings
Applications
The Omega FTB600 series turbine flow meters are used in laboratory, industrial, and OEM applications where inline liquid flow measurement is required. Typical uses include monitoring flow rates of water, coolants, chemical solutions, and other compatible liquids in process piping, cooling loops, chemical dosing systems, and test rigs. The barbed fitting design makes these sensors well suited for connection to flexible tubing commonly found in lab plumbing and light industrial systems. Omega Engineering has long supplied this style of compact inline flow sensor to research labs, universities, and industrial process control applications. The pulse or frequency output is compatible with a wide range of flow rate indicators, totalizers, and data acquisition systems.
This Omega Engineering FTB604 turbine flow meter is new and unused. The unit shows no wear — the barbed fittings still have their original yellow protective end caps in place and the paddlewheel rotor appears clean and undamaged. The cable is intact with bare wire leads at the termination end. This is new old stock; original retail packaging is not included. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
Omega Engineering |
Model: |
FTB604 |
MPN: |
FTB604 |
Type: |
Turbine / Paddlewheel Flow Meter |
SKU: |
31271 |
Seller Notes: |
Includes flow meter body with long cable lead and barbed end fittings. |
Country/Region of Manufacture: |
Netherlands |
Form Factor: |
Inline Sensor |
Fitting Type: |
Barbed |
Sensing Technology: |
Turbine / Paddlewheel |
Cable: |
Included — multi-conductor cable with bare wire leads |
Series: |
FTB600 |
Application: |
Liquid flow measurement — water, chemicals, coolants |
Condition Notes: |
This Omega Engineering FTB604 turbine flow meter is new and unused. Yellow protective end caps are still in place; paddlewheel and cable are intact. New old stock — no original packaging. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |