New Brunswick

New Brunswick Galaxy 170R CO170R-120-1000 CO2 Incubator 170L IR Sensor 2-Unit

(No reviews yet) Write a Review
SKU:
52872
MPN:
CO170R-120-1000
Condition:
Used
Availability:
Usually ships within 1-2 business days.
Weight:
420.00 LBS
Shipping:
Calculated at Checkout
  • New Brunswick Galaxy 170R CO2 incubators — two units stacked with bracket, front view in facility
  • Label closeup showing Model No. CO170R-120-1000 and Serial No. 43174
  • Label closeup showing Model No. CO170R-120-1000 and Serial No. 42699
  • New Brunswick Galaxy 170R stacked pair on pallet — front three-quarter view, both LCD panels visible
  • Stacked Galaxy 170R units — right-side view showing power cord routing and side panels
  • Stacked Galaxy 170R units — left-side view showing door hinge side and rear panel access
  • Rear view of stacked Galaxy 170R units — showing IEC power inlets and cable bundle
  • Interior chamber of Galaxy 170R — stainless steel chamber with three perforated wire shelves and water pan
  • Close-up of Galaxy 170R chamber interior — perforated shelf detail and glass inner door seal
  • Galaxy 170R chamber interior — top view showing IR CO2 sensor probe and shelf rails
  • Galaxy 170R interior — lower shelf and stainless condensate/water pan detail
  • Galaxy 170R front control panel — LCD screen lit solid blue (no text visible), five softkeys and directional pad
  • Galaxy 170R LCD display closeup — showing programmed setpoints 37.0°C and 5.0% CO2, alarm status, and menu buttons PROG USER ALARM DIAG HELP
  • Galaxy 170R LCD display closeup — showing chamber temp 15.5°C and CO2 level 0.0%, alarms disarmed message
  • New Brunswick Galaxy 170R nameplate closeup — 'an Eppendorf company' logo and model name
  • Asset label on unit — barcode 933967, description INCUBATOR CARBON DIOXIDE; Property Control label 14031661
  • Galaxy 170R rear panel — IEC power inlet, rocker switch, rating plate showing 120V 50/60Hz 1300W 10A, CO2 inlet fitting
  • Galaxy 170R lower unit rear panel — IEC power inlet, rocker switch, rating plate, and CO2 inlet fitting
  • Bundle of sensor cables on rear of unit — including thermocouple connector and multi-wire harness
  • Thermocouple connector close-up — label reads Burns Order S000431674 Item 2 Model 17349-6-360
  • New Brunswick CO170R-120-1000 Galaxy 170R High Capacity CO2 Incubator, 2 Units
$2,400.00
Was: $8,100.00
Current Stock: 1

Sold Out

Description

New Brunswick Galaxy 170R CO170R-120-1000 CO2 Incubator 170L IR Sensor 2-Unit

Set of two stacked CO2 incubators with 170L chamber capacity each. Direct heating with infrared CO2 sensor maintains controlled temperature and gas environment for cell culture and biological sample incubation.

Specifications & What's Included

  • Model: Galaxy 170R (CO170R-120-1000)
  • Chamber Volume: 170L per unit
  • CO2 Sensor: Infrared (IR)
  • Heating: Six-sided direct heat, fanless design
  • Temperature Control: Yes, with sealed glass inner door
  • Chamber Material: Stainless steel
  • Display: LCD readout (temperature and CO2)
  • Power: 120V, 50/60Hz, 1300W, 10A
  • Connectivity: RS-232, 25mm access port, alarm relay
  • Stacking Bracket: Included

Applications

Galaxy 170R incubators are used for mammalian cell culture, microbial cultures, and biological sample incubation in research and production environments. The infrared CO2 sensor provides stable gas monitoring without direct gas contact, reducing consumption. Standard platform in academic and pharmaceutical laboratories requiring sustained environmental control.

Condition: Used
These New Brunswick Galaxy 170R CO2 Incubators (CO170R-120-1000) have been tested and are in working order. Both units power on, control temperature and CO2, and operate as expected. One known issue: the top unit's LCD has corrupted pixels — a portion of the screen does not display. The display does light up and shows partial content, and the unit still functions, but the screen damage is visible and documented. Photos clearly show the extent of the LCD fault. The bottom unit's display appears normal. Both chambers are clean internally with no visible contamination or physical damage to the stainless steel interior. The units are sold as a stacked pair with the stacking bracket. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
New Brunswick Scientific (Eppendorf)
Model:
Galaxy 170R
MPN:
CO170R-120-1000
Type:
CO2 Incubator
SKU:
52872
Condition:
Used – Inspected and Tested
Seller Notes:
Set of 2 stacked units with stacking bracket; top unit LCD partially failing
Country/Region of Manufacture:
United Kingdom
Form Factor:
Freestanding, Stackable
Power Requirements:
120V, 50/60Hz, 1300W, 10A
Number of Units:
2
Chamber Volume:
170L per unit
CO2 Sensor Type:
Infrared (IR)
Temperature Control:
Yes — six-sided direct heating
Heating Type:
Six-Sided Direct Heat, Fanless
Inner Door:
Sealed glass inner door
Chamber Material:
Stainless steel
Display Type:
LCD with temperature and CO2 readout
Interface / Connectivity:
RS-232
Access Port:
25 mm access port
Alarm:
Alarm relay standard
Gas Consumption:
Low gas consumption design
Compatible With:
Galaxy 170R stacking bracket (included)
Application / Use Case:
Cell culture, biological sample incubation
Temperature Setpoint (visible):
37.0°C (programmed setpoint per LCD)
CO2 Setpoint (visible):
5.0% CO2 (programmed setpoint per LCD)
Condition Notes:
New Brunswick Galaxy 170R CO2 Incubators (CO170R-120-1000), set of 2, tested and working. Top unit LCD has corrupted pixels — partial display only; unit still functions. Bottom unit display normal. Stacking bracket included.
View AllClose

Related Products

Related Products

Sanyo MCO-15A CO2 Incubator – front right three-quarter view showing outer cabinet and control panel Sanyo MCO-15A CO2 Incubator – rear view showing power cord, ventilation, and dielectric test certificate label
Add to Cart
Quick view

Sanyo MCO-15A CO2 Incubator Air Jacketed Digital 5.8 Cu Ft 164L 115V 60Hz

Sanyo

$600.00
Was: $1,200.00
Sanyo MCO-15A CO2 Incubator Air Jacketed Digital 5.8 Cu Ft 164L 115V 60HzThe Sanyo MCO-15A is an air jacketed digital CO2 incubator with a 5.8 cubic foot (164-liter) chamber, designed for cell and...
48514
SKU:
48514
Availability:
Usually ships within 1–2 business days.
Weight:
168.00 LBS
Brand:
Sanyo
Model:
MCO-15A
MPN:
MCO-15A
SKU:
48514
Type:
Air Jacketed Digital CO2 Incubator
Condition:
As-Is / For Parts or Not Working
Seller Notes:
Powers on; temp tested accurate. CO2 untested; error code E03. Sold as-is.
Chamber Volume:
5.8 Cu Ft / 164 Liters
Power Requirements:
115V AC, 60Hz
Temperature Range:
+5°C above ambient
CO2 Gas Supply Pressure:
0.3 Kg/cm²G
CO2 Sample Out Flow Rate:
Max 0.2 L/min
Jacketing Type:
Air Jacketed
Control Type:
Digital
Display:
Dual digital LED (Temperature and CO2)
Overall Dimensions:
27.5" W x 25.5" D x 36" H
Application / Use Case:
Cell culture, tissue culture, biological research
Country/Region of Manufacture:
Japan
Form Factor:
Freestanding Benchtop/Floor Unit
Condition Notes:
Sanyo MCO-15A CO2 Incubator powers on; heat tested to 45°C with accurate temps confirmed. CO2 function untested. Error code E03 present — source unknown. Sold as-is for parts or repair. Power cord included.
Precise Sensors 111-2-1000-01-G-35-10-B6 pressure transducer — front and side view showing stainless body, threaded process port, and label with part number and 0-1000 PSIG range Precise Sensors 111-2-1000-01-G-35-10-B6 pressure transducer — opposite side view showing 6-pin circular electrical connector and label with serial number 30693
Add to Cart
Quick view

Precise Sensors 111-2-1000-01-G-35-10-B6 Pressure Transducer 0-1000 PSIG

Precise Sensors

$95.00
Was: $200.00
Precise Sensors 111-2-1000-01-G-35-10-B6 Pressure Transducer 0-1000 PSIGThe Precise Sensors 111-2-1000-01-G-35-10-B6 is a gauge pressure transducer with a 0–1000 PSIG measurement range. It features a...
39242
SKU:
39242
Availability:
Usually ships within 1-2 business days.
Weight:
1.00 LBS
Brand:
Precise Sensors
Model:
111-2-1000-01-G-35-10-B6
MPN:
111-2-1000-01-G-35-10-B6
Type:
Pressure Transducer
SKU:
39242
Pressure Range:
0-1000 PSIG
Pressure Type:
Gauge (PSIG)
Output Connector:
6-pin circular connector
Process Connection:
Male threaded port (front)
Body Material:
Stainless Steel
Manufacturer Location:
Monrovia, CA 91016
Country/Region of Manufacture:
United States
Form Factor:
Inline / In-line body
Condition:
Used – Inspected and Pulled from Working Environment
Seller Notes:
Transducer only; no additional accessories included.
Condition Notes:
Precise Sensors 111-2-1000-01-G-35-10-B6 0-1000 PSIG pressure transducer. Inspected; good used condition. Stainless body shows minor scuffing. Connector pins clean and intact. No damage to process port or body.