Description
Netstal SPV 110.240.9450b Injection Molding System Control Card PCB Board
This is a used Netstal SPV 110.240.9450b control card/PCB board from a Diskjet injection molding system manufactured by Steag Firstlight. The board serves as a system-level control and I/O interface card within the Netstal Komplett machine platform, providing logic control, signal routing, and I/O connectivity for the injection molding process. The PCB label (Image 3) reads NETSTAL SPV 110.240.9451a gebohrt with a pi date code of [9726/28], indicating manufacture in late 1997.
Specifications & What's Included
- Manufacturer: Netstal
- Part Number: SPV 110.240.9450b
- PCB Silkscreen Part Number: SPV 110.240.9451a (gebohrt)
- Date Code: 9726/28 (week 26–28 of 1997)
- Form Factor: Bare PCB card/module
- Multiple green screw-terminal blocks along one edge (for I/O wiring connections)
- Multiple DIP ICs including logic and driver chips (specific markings not legible in photos)
- White Molex-style power/signal connector on board
- Ribbon cable header connector
- Through-hole and mixed SMD/PTH construction on green FR4 substrate
- Compatible with: Netstal Diskjet injection molding system / Steag Firstlight platform
Applications
Netstal is a Swiss manufacturer of high-precision injection molding machines, particularly well known for their Diskjet and Synergy series used in optical media (CD, DVD) disc production and other precision plastic molding applications. The SPV series control cards are I/O and logic interface boards that form part of the machine's distributed control architecture, managing sensor inputs, actuator outputs, and inter-module communication within the system. These boards are sought after as direct replacement spare parts for facilities maintaining Netstal Diskjet or Komplett-platform injection molding lines, where sourcing original OEM control electronics can be challenging. The date code places this board in the 1997 production era, consistent with late-1990s Netstal machine generations.
This Netstal SPV 110.240.9450b injection molding system control card was pulled from a working Diskjet injection molding system and is in used condition. The board shows normal signs of prior service use. Component and solder sides appear intact with no obvious damage visible. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
Warranty Information
Additional Information
Brand: |
Netstal |
Model: |
SPV 110.240.9450b |
MPN: |
SPV 110.240.9450b |
Secondary Model: |
SPV 110.240.9451a |
Type: |
Injection Molding System Control Card / PCB |
SKU: |
46357 |
Compatible With: |
Netstal Diskjet Injection Molding System |
Compatible With 2: |
Steag Firstlight Diskjet System |
Form Factor: |
PCB Card / Board Module |
Seller Notes: |
Pulled from a working Diskjet injection molding system |
Condition: |
Used – Pulled from Working Environment |
Country/Region of Manufacture: |
Switzerland |
Condition Notes: |
Netstal SPV 110.240.9450b control card pulled from a working Diskjet injection molding system. Used condition; board shows normal service wear with no visible damage. Please view photos and contact us with questions. |
