Nelmor

Nelmor G810M1 Plastic Granulator Shredder 5HP 230/460V 3-Phase 13.6/6.8A

(No reviews yet) Write a Review
SKU:
51676
MPN:
G810M1
Condition:
Used
Availability:
Currently out of stock — contact us for availability.
Weight:
590.00 LBS
Shipping:
Calculated at Checkout
  • Nelmor G810M1 plastic granulator shredder front view — green painted steel enclosure with top feed hopper, Square D control panel mounted to right side, asset tag 63 visible
  • Nelmor G810M1 plastic granulator shredder left-rear view — 5HP 3-phase AC motor mounted to the side, heavy steel cabinet showing surface rust and paint wear
  • Close-up of shredded plastic output from Nelmor G810M1 granulator — red and brown plastic regrind pieces shown against ruler for scale, confirming machine shredded test plastic
  • Interior rotor view of Nelmor G810M1 granulator — six-bolt rotor assembly with perforated screen visible, showing heavy use wear and surface rust inside cutting chamber
  • Nelmor Co. Inc. nameplate on G810M1 plastic granulator — orange badge showing manufacturer name, North Uxbridge Massachusetts, model G810M1, and serial number
  • Motor nameplate on Nelmor G810M1 granulator — Lincoln AC motor label showing 5HP, 250/460V, 13.6/6.8A, 1745 RPM, 3-phase, 60 Hz, Frame, Service Factor 1.15, Insulation Class B
  • Top feed hopper interior of Nelmor G810M1 granulator — looking down into the open feed chute showing heavy surface rust on interior walls and lower cutting chamber below
$1,846.00
Was: $2,500.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

Nelmor G810M1 Plastic Granulator Shredder 5HP 230/460V 3-Phase 13.6/6.8A

The Nelmor G810M1 is a heavy-duty plastic granulator manufactured by Nelmor Co., Inc. of North Uxbridge, Massachusetts. This machine size-reduces plastic scrap — sprues, runners, trim, rejected parts, and similar material — into uniform regrind flake suitable for reprocessing or recycling. It was powered on at our facility and shredded test plastic, confirming it operates. The machine is currently wired for the 460V (high-voltage) configuration. Note: the motor's wire numbering has become illegible, and our technician was unable to identify the individual conductors needed to reconfigure the winding from 460V to 230V — the buyer will need to address this if 230V operation is required.

Specifications & What's Included

  • Manufacturer: Nelmor Co., Inc. — N. Uxbridge, Massachusetts
  • Model: G810M1
  • Motor: 5 HP, Lincoln AC Motor
  • Voltage: 230/460 VAC (currently configured for 460V)
  • Amperage: 13.6 A (230V) / 6.8 A (460V)
  • Phase: 3-Phase
  • Frequency: 60 Hz
  • Motor Speed: 1745 RPM
  • Motor Insulation Class: B
  • Service Factor: 1.15
  • Top Feed Port: 10" W x 7.5" H
  • Top-Side Port: 9.75" W x 8.5" H
  • Bottom Collection Port: 10.75" W x 12.5" H
  • Overall Dimensions: 32" W x 24" D x 56" H
  • Rotor: Six-bolt rotor assembly with perforated screen visible in cutting chamber
  • Control: Square D control panel mounted to machine frame
  • Condition: Heavy use — surface rust on interior chute and cutting chamber, paint wear on exterior cabinet
  • Freight shipment required (approx. 540 lbs)

Applications

Plastic granulators like the Nelmor G810M1 are standard equipment in plastics processing and recycling operations. They reduce scrap material — sprues and runners from injection molding, edge trim from extrusion lines, rejected parts, and purge material — into small, uniform regrind that can be blended back into the production process or sold as recycled resin. The G810M1 is a floor-standing, single-rotor granulator suited for medium-throughput in-line or beside-the-press applications. Nelmor was a well-regarded American plastics machinery brand whose granulators were widely used in injection molding shops and plastics recycling facilities from the 1960s through the 1990s. This class of machine continues to be used today in plastics processing environments wherever size reduction and material recovery are part of the workflow.

Condition: Used
This Nelmor G810M1 Plastic Granulator has been powered on at our facility and shredded test plastic — it works. The machine shows heavy use throughout: surface rust on the interior feed chute and cutting chamber, paint wear and rust on the exterior cabinet, and worn rotor hardware. It is currently wired for 460V (high-voltage configuration). The motor's wire numbering has become illegible over time, and our technician was unable to identify the individual wires needed to reconfigure it to the 230V (low-voltage) setup — the buyer will need to address this if 230V operation is required. At 540 lbs and 32" x 24" x 56" tall, this machine requires freight shipping. Please contact us for a shipping quote, to arrange local pickup, or to schedule a viewing at our facility. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Nelmor
Model:
G810M1
MPN:
G810M1
Type:
Plastic Granulator / Shredder
SKU:
51676
Voltage:
230/460 VAC
Amperage:
13.6/6.8 A
Phase:
3-Phase
Frequency:
60 Hz
Motor Horsepower:
5 HP
Motor RPM:
1745 RPM
Motor Frame:
NEMA Frame (see motor nameplate)
Motor Insulation Class:
Class B
Service Factor:
1.15
Top Feed Port:
10" W x 7.5" H
Top-Side Port:
9.75" W x 8.5" H
Bottom Collection Port:
10.75" W x 12.5" H
Overall Dimensions:
32" x 24" x 56" H
Current Voltage Configuration:
460V (High voltage wiring — see listing notes)
Seller Notes:
Machine only — no screens or additional accessories confirmed. Freight shipment required.
Country/Region of Manufacture:
United States
Manufacturer Location:
N. Uxbridge, Massachusetts
Application:
Plastic scrap size reduction, regrind, recycling
Power Requirements:
230/460 VAC, 3-Phase, 60 Hz
Compatible Materials:
Plastic scrap, sprues, runners, trim, film
Condition Notes:
This Nelmor G810M1 Plastic Granulator powers on and shredded test plastic at our facility. Currently wired for 460V — motor wire numbering is illegible, preventing reconfiguration to 230V. Shows heavy use wear. 540 lbs; freight shipping required.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose