Description
National Instruments SHC68-68-EPM 192061B-01 Shielded Cable X/M Series DAQ
The National Instruments SHC68-68-EPM is an Extended Performance (EPM) shielded I/O cable designed to connect NI X Series and M Series DAQ devices to terminal blocks, signal conditioning modules, and accessory boards. The EPM shielding provides enhanced noise rejection compared to standard shielded cables, making it suitable for applications where signal integrity is important. Part number 192061B-01 is printed on the cable label.
Specifications & What's Included
- Manufacturer: National Instruments (NI)
- Model: SHC68-68-EPM
- Part Number: 192061B-01
- Cable Type: Extended Performance (EPM) shielded I/O cable
- Connector A: 68-pin MDR (female) — blue housing, NI keyed
- Connector B: 68-pin VHDCI (male) — gray metal shell
- Compatible with: NI X Series and M Series DAQ devices
- Country of Manufacture: China (per label)
- Included: Cable only — no accessories or mounting hardware
Applications
The SHC68-68-EPM is used to connect National Instruments X Series and M Series multifunction DAQ cards and modules to NI signal conditioning accessories, terminal blocks (such as the SCB-68 and TB-2706), and breakout boards. These cables are standard in data acquisition setups where analog input, analog output, and digital I/O signals are routed from a DAQ card — installed in a PC or PXI chassis — to external sensors, actuators, and signal conditioning hardware. The EPM variant is specifically designed for environments with higher electromagnetic interference, offering better shielding than the standard SHC68-68 cable. NI X Series and M Series DAQ hardware remains widely used in laboratory, industrial test, and automated measurement applications today.
This National Instruments SHC68-68-EPM shielded DAQ cable (PN 192061B-01) has been inspected and is in good used condition. The cable jacket is intact with no visible cuts or kinks, and both the blue 68-pin MDR connector and the gray VHDCI connector appear clean and undamaged. Normal light handling wear is present on the cable and connectors, consistent with prior use. Please review our photos and contact us with any questions.
Warranty Information
Additional Information
Brand: |
National Instruments |
Model: |
SHC68-68-EPM |
MPN: |
192061B-01 |
SKU: |
46843 |
Type: |
Shielded I/O Cable |
Compatible With: |
NI X Series DAQ Devices |
Compatible With 2: |
NI M Series DAQ Devices |
Connector Type: |
68-pin VHDCI (male) to 68-pin MDR (female) |
Number of Pins: |
68 |
Cable Type: |
Shielded, Extended Performance (EPM) |
Country/Region of Manufacture: |
China |
Form Factor: |
Cable |
Seller Notes: |
Cable only — no accessories or additional hardware included. |
Condition Notes: |
National Instruments SHC68-68-EPM DAQ cable (PN 192061B-01) inspected and in good used condition. Cable jacket intact, both connectors clean and undamaged. Normal light handling wear. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |
