Mitsumi

Mitsumi CRMC-FX800S 8x IDE Internal CD-ROM Drive 50-Pin

(No reviews yet) Write a Review
SKU:
19853
MPN:
CRMC-FX800S
Condition:
Used
Availability:
Currently out of stock — contact us for availability.
Weight:
3.00 LBS
Shipping:
Calculated at Checkout
$10.60
Was: $22.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

Mitsumi CRMC-FX800S 8x IDE Internal CD-ROM Drive 50-Pin

The Mitsumi CRMC-FX800S is an 8x-speed internal CD-ROM drive using the IDE (also called PATA or ATAPI) interface standard. This 3.5-inch half-height drive connects directly to an IDE host adapter or IDE channel on a system motherboard using a standard 50-pin ribbon cable and 4-pin power connector. The drive reads CD-ROM, CD-R, and CD-RW media at speeds up to 8x, making it suitable for file retrieval, software installation, and audio CD playback on vintage systems.

Specifications & What's Included

  • Make: Mitsumi
  • Model: CRMC-FX800S
  • Interface: IDE / PATA (Parallel ATA)
  • Connector Type: 50-pin ribbon cable and 4-pin Molex power
  • Speed: 8x CD-ROM read
  • Media Support: CD-ROM, CD-R, CD-RW
  • Form Factor: 3.5-inch half-height internal drive
  • Protocol: ATAPI
  • Condition: Used, pulled from working system

Applications

The Mitsumi CRMC-FX800S is representative of the internal CD-ROM drives that were standard in desktop and tower computers throughout the late 1990s and early 2000s, particularly in budget and mid-range systems. This drive type was used for software distribution, operating system installation, data retrieval, and audio CD playback. IDE CD-ROM drives like this one remained common until around 2008–2010, when SATA optical drives and then external USB drives became dominant. Today, these drives serve primarily in vintage PC restoration, retro gaming setups, legacy system maintenance, and data recovery from old CD-R/CD-RW media. This particular unit is fully compatible with any system featuring a free IDE channel and a standard 4-pin Molex power connector — it will work on ATX and older AT form-factor motherboards that have IDE support.

Photo Notice: This item has not yet been photographed. Please contact us before purchasing for current photos, condition details, and availability confirmation.
Condition: Used
This Mitsumi CRMC-FX800S 8x IDE internal CD-ROM drive is in used condition, pulled from a working computer system where it had been in regular use. It has been visually inspected and is ready for installation in a compatible IDE/PATA system. As a used component from an operational environment, it shows typical age and service wear consistent with its era. Please review our photo set and contact us with any questions before purchasing.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Mitsumi
Model:
CRMC-FX800S
Type:
Internal CD-ROM Drive
Interface:
IDE / PATA (50-pin)
Speed:
8x
Drive Format:
3.5-inch internal
Protocol:
ATAPI
Form Factor:
Half-Height Internal
Compatible With:
IDE/PATA systems, ATX/AT motherboards with IDE support
SKU:
19853
Seller Notes:
Pulled from working computer system
Country/Region of Manufacture:
Japan
Condition Notes:
Mitsumi CRMC-FX800S 8x IDE CD-ROM drive in used condition, pulled from working computer system. Visually inspected. Typical wear for its age.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose