Metro-Line Industries

Metro-Line Industries ML1000 Cart Mounted Oil Pump w/ Waste Tank 120V 60Hz

(No reviews yet) Write a Review
SKU:
30943
MPN:
ML1000
Condition:
Used
Availability:
Usually ships within 1-2 business days.
Weight:
275.00 LBS
Shipping:
Calculated at Checkout
  • Metro-Line Industries ML1000 cart-mounted oil pump system – full front-left view showing control panel, dual stainless steel tanks, and yellow hose assemblies on wheeled cart
  • Metro-Line ML1000 oil pump cart – rear-right view showing dual stainless steel supply and waste tanks with yellow coiled hoses and control panel facing away
  • Metro-Line Industries ML1000 rating plate showing Model No. ML1000, Serial No. 0281, Mfg Date 3/12, Volts AC 120, Hz 60, Amps 10
  • ML1000 control panel close-up showing Drain Tank and Supply Tank indicator lights, Power On/Off switch, Alert Hi/Low indicator, and dual analog pressure gauges on teal enclosure
  • Close-up of stainless steel supply tank with SUPPLY and FILL labels and quick-disconnect fill port fitting
  • Close-up of stainless steel waste tank with WASTE and INLET labels and quick-disconnect inlet port fitting
  • Close-up of stainless steel drain tank section showing DRAIN label and quick-disconnect drain port fitting
  • Close-up of yellow hose manifold junction showing quick-disconnect fittings, valves, and hose routing between tanks
  • Metro-Line ML1000 control panel and pump motor assembly – front view showing teal panel with indicators, gauges, and pump motor visible below
  • Interior view of Metro-Line ML1000 control enclosure with lid open, showing brass solenoid valve manifold, wiring harness, transformer, and internal PCB components
  • Metro-Line Industries Cart Mounted Oil Pump w/ Waste Tank ML1000
  • Metro-Line Industries Cart Mounted Oil Pump w/ Waste Tank ML1000
  • Metro-Line Industries Cart Mounted Oil Pump w/ Waste Tank ML1000
$700.00
Was: $1,400.00
Current Stock: 1

Sold Out

Description

Metro-Line Industries ML1000 Cart Mounted Oil Pump w/ Waste Tank 120V 60Hz

Cart-mounted oil pump system designed for industrial machine shop and telecom facility use. Supplies, dispenses, and collects waste oil with dual stainless steel tanks and mobile cart configuration.

Specifications & What's Included

  • Model: ML1000 | Manufactured: June 2012
  • Power: 120V AC, 60Hz, 10A
  • Dual stainless steel tanks (supply and waste)
  • Control panel with power on/off, pressure gauges, and LED status indicators
  • Yellow coiled hose assemblies with quick-disconnect fittings
  • Internal brass manifold valves with solenoid actuators
  • Includes mobile cart base

Applications

This pump type is used in machine shops, manufacturing facilities, and telecom installations for centralized oil management. It serves coolant circulation systems, hydraulic equipment maintenance, and waste oil collection in production environments. The cart-mounted design allows repositioning between work areas and equipment requiring servicing.

Condition: Used
This Metro-Line Industries ML1000 Cart Mounted Oil Pump has been inspected and appears to be in good used condition. The stainless steel supply and waste tanks are clean with no visible damage, and the yellow hose assemblies with quick-disconnect fittings are intact. The teal control panel housing shows normal surface wear consistent with shop use. The internal valve manifold and wiring are visible in photos and appear complete and undamaged. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Metro-Line Industries
Model:
ML1000
MPN:
ML1000
Type:
Cart Mounted Oil Pump with Waste and Supply Tanks
SKU:
30943
Condition:
Used – Inspected and Pulled from Working Environment
Seller Notes:
Includes cart, control panel, stainless supply tank, stainless waste tank, and yellow hose assemblies
Country/Region of Manufacture:
United States
Power Requirements:
120V AC, 60Hz, 10A
Voltage Rating:
120V AC
Current Rating:
10A
Frequency:
60Hz
Tank Configuration:
Dual stainless steel tanks: Supply and Waste
Tank Material:
Stainless Steel
Manufacture Date:
June 2012
Form Factor:
Cart Mounted / Mobile
Control Panel Features:
Power on/off, Alert (Hi/Low), pressure gauges, tank status indicators
Indicators:
LED indicators: Full/Vented, 80% Full, Operate, Vented/Refeed Empty, 80% Empty, Dispense, Refill
Pressure Monitoring:
Dual analog pressure gauges (Drain Tank and Supply Tank)
Hose Type:
Yellow coiled hoses with quick-disconnect fittings
Valve Assembly:
Internal brass manifold valves with solenoid actuators
Application:
Oil supply, dispensing, and waste collection in industrial/machine shop use
Condition Notes:
Metro-Line Industries ML1000 cart-mounted oil pump inspected and in good used condition. Stainless tanks clean, hoses intact, control panel functional. Normal shop wear. Please view photos and contact us with questions.
View AllClose

Related Products

Related Products

Custom stainless steel chemical transport cart on casters – full front view showing tank, pump, hoses, and push-handle frame Chemical transport cart front view without handle – stainless tank with integrated pump, valve manifold, and braided flex hose
Add to Cart
Quick view

Custom Stainless Steel Chemical Transport Cart on Casters w/ Pump Valves Tank

Unbranded

$2,000.00
Was: $4,000.00
Custom Stainless Steel Chemical Transport Cart on Casters w/ Pump Valves TankThis is a custom-fabricated stainless steel chemical transport cart designed for the mobile storage and dispensing of...
30935
SKU:
30935
Availability:
Usually ships within 1-2 business days of payment.
Weight:
151.00 LBS
Brand:
Unbranded
Model:
Custom
Type:
Chemical Transport Cart
SKU:
30935
Condition:
Used – Inspected and Pulled from Working Environment
Frame Material:
Stainless Steel
Tank Material:
Stainless Steel
Mobility:
Casters (4-wheel)
Chemical Compatibility:
Xylene (NFPA labeled); general solvent service
Pump:
Integrated pump (brand/model not legible in photos)
Valve Type:
Stainless steel ball valves and needle valves
Coupling Type:
Quick-connect couplings (VENT and CHEM 2 labeled)
Level Sensing:
LOW and HIGH level indicators with wired sensors
Pressure Gauge:
Inline pressure gauge included
Fittings:
Stainless steel compression fittings and manifold
Hose/Line Type:
Braided stainless flex hose and tubing
Hazard Label:
NFPA diamond labels – Xylene (Health/Flammability/Reactivity)
Application:
Semiconductor, clean room, lab solvent/chemical dispensing
Form Factor:
Mobile cart
Seller Notes:
Sold as shown; includes cart frame, tank, pump, valves, hoses, and couplings.
Country/Region of Manufacture:
United States
Condition Notes:
Custom stainless steel chemical transport cart on casters. Inspected and in good condition. Frame, tank, pump, valves, couplings, and sensor wiring all appear intact. Normal wear from prior use. Contact us with any questions.
Lab-Line Instruments 3535 Orbital Shaking Water Bath – front panel view showing controls, RPM meter, and stainless tank on casters Lab-Line 3535 Orbit Water Bath Shaker – rear view showing back panel, power cord, and stainless tank
Add to Cart
Quick view

Lab-Line Instruments 3535 Orbital Shaking Water Bath 120V 10.5A 50/60Hz

Lab-Line Instruments

$550.00
Was: $1,100.00
Lab-Line Instruments 3535 Orbital Shaking Water Bath 120V 10.5A 50/60HzBenchtop orbital shaking water bath designed for laboratory applications requiring temperature control and orbital motion...
46054
SKU:
46054
Availability:
Usually ships within 1-2 business days.
Weight:
100.00 LBS
Brand:
Lab-Line Instruments
Model:
3535
MPN:
3535
Type:
Orbital Shaking Water Bath
SKU:
46054
Voltage:
120V
Current:
10.5A
Phase:
Single Phase
Frequency:
50/60Hz
Power Requirements:
120V AC, 10.5A, Single Phase, 50/60Hz
Speed Range:
0–400 RPM (analog RPM meter, x100 scale)
Temperature Range:
Up to 110°C (water temperature gauge)
Temperature Control:
Adjustable thermostat + safety thermostat
Tank Material:
Stainless steel
Tank Size:
Large
Form Factor:
Benchtop / Floor-standing with casters
Motion Type:
Orbital (rotary)
Front Panel Controls:
Power, wave timing, orbital adjust, safety thermostat, RPM meter, temp gauge
Application / Use Case:
Cell culture, dissolution testing, biological assays, sample incubation
Country/Region of Manufacture:
United States
Condition:
Used – Inspected
Seller Notes:
Includes power cord. Unit is on casters for mobility.
Condition Notes:
Lab-Line 3535 Orbital Shaking Water Bath inspected and in good used condition. Front panel controls and gauges appear intact. Stainless tank shows typical water staining and mineral deposits. Power cord included. Please contact us with any questions.
MDT Harvey Chemipurge Model 5-6 autoclave purge pump — front-left view showing Chemipurge control box atop black pump housing with brass elbow fitting MDT Harvey Chemipurge Model 5-6 — rear view showing cut power wires exiting bottom of pump housing and rear of control box
Add to Cart
Quick view

MDT Harvey Chemipurge Model 5-6 Chemical Autoclave Purge Pump 120V 60Hz 2.5A

MDT Harvey

$75.00
Was: $150.00
MDT Harvey Chemipurge Model 5-6 Chemical Autoclave Purge Pump 120V 60Hz 2.5APurge pump assembly for MDT Harvey Chemiclave chemical autoclaves. Motor-driven unit handles purge cycle operations during...
9314
SKU:
9314
Availability:
Usually ships within 1–2 business days.
Weight:
13.00 LBS
Brand:
MDT Harvey
Model:
5-6
MPN:
5-6
Type:
Chemical Autoclave Purge Pump
SKU:
9314
Condition:
Used – Inspected and Tested
Seller Notes:
Pump motor tested working; power wires cut and require rewiring; purge light cap may be broken
Compatible With:
MDT Harvey Chemiclave Chemical Autoclave
Voltage Rating:
120V AC
Current Rating (Amps):
2.5A
Frequency:
60Hz
Motor Manufacturer:
Thomas Industries Inc.
Motor Model:
107AA20-123
Motor Number:
608102A
Motor Voltage:
115V
Motor Current:
1.7A
Motor Insulation Class:
B1
Motor Protection:
Thermally Protected
Country/Region of Manufacture:
United States
Form Factor:
Benchtop
Power Requirements:
120V AC, 60Hz, 2.5A
Condition Notes:
MDT Harvey Chemipurge Model 5-6 autoclave purge pump — motor tested good and working at our facility. Power wires have been cut and will need rewiring. Red Purge light cap may be broken. Please see photos.
ONEAC CP1107 AC Line Conditioner — front-right three-quarter view showing ONEAC logo, ventilation slots, power cord, and ON/OFF rocker switch ONEAC CP1107 Line Conditioner — front panel close-up showing ONEAC logo and illuminated ON/OFF rocker switch
Add to Cart
Quick view

ONEAC CP1107 006-213 AC Line Conditioner 750VA 120V 6.25A 60Hz 4-Outlet

Oneac

$50.00
Was: $100.00
ONEAC CP1107 006-213 AC Line Conditioner 750VA 120V 6.25A 60Hz 4-OutletThe ONEAC CP1107 is a desktop AC line conditioner rated at 750VA, designed to protect sensitive electronic equipment from power...
12906
SKU:
12906
Availability:
Usually ships within 1–2 business days.
Weight:
25.00 LBS
Brand:
ONEAC
Model:
CP1107
MPN:
006-213
Type:
AC Line Conditioner / Power Conditioner
SKU:
12906
Input Voltage:
120V AC
Input Current:
6.7 A
Output Voltage:
120V AC
Output Current (Max):
6.25 A
Power Rating:
750 VA
Frequency:
60 Hz
Phase:
Single Phase
Number of Outlets:
4
Outlet Type:
NEMA 5-15R
Form Factor:
Desktop
Power Requirements:
120V AC, 60Hz, 6.7A
Country/Region of Manufacture:
United States
Condition:
Used – Inspected and Tested
Seller Notes:
No manual or accessories included. Unit only.
Condition Notes:
ONEAC CP1107 AC Line Conditioner. Pulled from a working environment and tested in good working condition. Shows normal wear — minor scuffs and scrapes on enclosure. No manual or accessories included. Unit only.