Description
Mennen Medical 210-770-010 Model 210 Control Box 115V 21W Rev E
The Mennen Medical Inc. Model 210 Control Box (part number 210-770-010) is an enclosure and control unit manufactured by Mennen Medical Inc. of Clarence, New York. It forms part of the Mennen Model 210 patient monitoring system and houses the internal electronics and cabling infrastructure that support the monitor's operation. The unit is built into a heavy-gauge gray steel enclosure with a cable port fitting and latch hardware on the rear panel.
Specifications & What's Included
- Manufacturer: Mennen Medical Inc., 10123 Main St., Clarence, NY 14031, USA
- Model: 210
- Part Number: 210-770-010
- Device Number: DEV 4206A
- Revision: Rev E
- Input Voltage: 115V
- Frequency: 50/60 Hz
- Power Rating: 21W
- Current Rating: 0.22A
- Country of Manufacture: USA
- Form Factor: Benchtop / tabletop steel enclosure
- Rear: round cable port with clamp fitting, latch hasp, two circular knockouts
- Top: power/function switch cutout and red warning label strip
- Control box only — no cables or accessories included
Applications
Mennen Medical Inc. was a U.S.-based manufacturer of bedside patient monitoring equipment active from the 1970s through the 1990s. The Model 210 system was used in hospital and clinical settings for continuous patient monitoring, including vital signs surveillance in ICU, CCU, and general ward environments. This control box dates from approximately August 1991 based on the label, placing it in the era when Mennen Medical was producing modular bedside monitors widely deployed in North American hospitals. Components and replacement parts from Mennen Medical systems are sought by biomedical engineering departments maintaining legacy installed monitoring equipment, as well as by collectors and researchers of vintage medical instrumentation.
This Mennen Medical Inc. Model 210 Control Box (P/N 210-770-010) has been inspected and appears to be in good used condition. The gray steel enclosure shows typical handling and shelf wear consistent with its age, including light scuffing on the top and sides. The cable port clamp and latch hardware are present and intact. It has not been powered up or tested at our facility, but it was pulled from a working medical environment where it was previously in use. Please view our photo set and contact us if you have any questions.
Thanks for your interest. Recycled Goods Inc., Ventura, CA.
FDA Regulation and Certification: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not purchase this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping.
Upon receipt, it is the BUYER'S responsibility to have this instrument checked and certified for use by a qualified Technician prior to placing it into use or service.
Warranty Information
Additional Information
Brand: |
Mennen Medical |
Model: |
210 |
MPN: |
210-770-010 |
Part Number: |
210-770-010 |
Type: |
Medical Control Box |
SKU: |
29190 |
Revision: |
Rev E |
Device Number: |
DEV 4206A |
Input Voltage: |
115V |
Power Rating: |
21W |
Current Rating: |
0.22A |
Frequency: |
50/60Hz |
Country/Region of Manufacture: |
United States |
Form Factor: |
Tabletop / Benchtop Enclosure |
Power Requirements: |
115V, 50/60Hz, 21W, 0.22A |
Seller Notes: |
Control box only — no cables or accessories included. |
Condition Notes: |
This Mennen Medical Model 210 Control Box (210-770-010) is in good used condition with typical cosmetic wear. Not tested at our facility but pulled from a working medical environment. Please contact us with questions. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |
