Meloy Labs

Meloy Labs CS10-2 SO2 Sulfur Dioxide Calibrator 115VAC 60Hz For Parts

(No reviews yet) Write a Review
SKU:
18818
MPN:
CS10-2
Condition:
Used
Availability:
Usually ships within 1–2 business days.
Weight:
44.00 LBS
Shipping:
Calculated at Checkout
  • Meloy Labs CS10-2 SO2 Calibrator — front panel view showing flow meter tube, concentration control knob, air flow and flow controls, handwritten notes on panel
  • Meloy Labs CS10-2 SO2 Calibrator — rear panel view showing cooling fan, gas output port, Meloy Laboratories rating label, and power cord inlet
  • Meloy Labs CS10-2 SO2 Calibrator — close-up of front panel label reading SO2 Calibrator Model CS10-2 with handwritten markings
  • Meloy Laboratories CS10-2 rating plate — Model CS10-2, Voltage 115AC, Frequency 60Hz, Serial No. 7E054, Made in USA, Springfield VA
$100.00
Was: $200.00
Current Stock: 1

Sold Out

Description

Meloy Labs CS10-2 SO2 Sulfur Dioxide Calibrator 115VAC 60Hz For Parts

Benchtop calibrator for sulfur dioxide gas measurement and verification. Used in ambient air quality monitoring and EPA compliance testing protocols.

Specifications & What's Included

  • Model: CS10-2
  • Gas Type: Sulfur Dioxide (SO2)
  • Power: 115V AC, 60 Hz
  • Form Factor: Benchtop
  • Manufacturer: Meloy Laboratories, Springfield, VA
  • Condition: As-Is / For Parts

Applications

SO2 calibrators are used to verify and maintain the accuracy of ambient air quality monitoring instruments and analyzers. These units generate known concentrations of sulfur dioxide gas for sensor calibration, verification, and EPA method compliance testing. Commonly paired with air quality monitoring networks and environmental compliance systems.

Condition: For Parts or Not Working
This Meloy Labs CS10-2 SO2 Sulfur Dioxide Calibrator is being sold as-is for parts or repair. It is missing internal components and is not in working order as a complete instrument. The internal pump has been confirmed operational. Beyond that, no functionality is guaranteed. The unit is a benchtop enclosure in fair cosmetic condition — the front panel shows handwritten notations and general surface wear consistent with lab use, and the chassis shows minor scuffing. The rear panel, fan, and gas output port appear intact. Sold strictly as-is with no warranty of function. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Meloy Laboratories
Model:
CS10-2
MPN:
CS10-2
Type:
SO2 Sulfur Dioxide Gas Calibrator
SKU:
18818
Condition:
As-Is / For Parts or Not Working
Seller Notes:
Missing internal parts; pump confirmed operational. Sold as-is.
Country/Region of Manufacture:
United States
Power Requirements:
115V AC, 60 Hz
Voltage:
115V AC
Frequency:
60 Hz
Form Factor:
Benchtop
Gas Type:
Sulfur Dioxide (SO2)
Application:
Ambient Air Quality Monitoring / EPA Calibration
Manufacturer Location:
Springfield, VA
Condition Notes:
Meloy Labs CS10-2 SO2 Calibrator sold as-is for parts/repair. Missing internal parts; pump confirmed operational. No overall functionality guaranteed. 115VAC/60Hz benchtop unit. Please view photos and contact us with questions.
View AllClose

Related Products

Related Products

Datatel DCP1110 AC/DC Transformer Plug-In Module – left-side view showing two transformer cores and indicator panel Datatel DCP1110 Transformer Module – right-side angled view showing dual transformer cores and green PCB base
Add to Cart
Quick view

Datatel DCP1110 AC/DC Transformer Plug-In Module 115V 60Hz -12 -5 +5 +12 VDC

Datatel

$75.00
Was: $150.00
Datatel DCP1110 AC/DC Transformer Plug-In Module 115V 60Hz -12 -5 +5 +12 VDCThe Datatel DCP1110 is a plug-in AC/DC transformer module that accepts a 115V AC single-phase, 60Hz primary input and...
48599
SKU:
48599
Availability:
Usually ships within 1-2 business days.
Weight:
14.00 LBS
Brand:
Datatel
Model:
DCP1110
MPN:
DCP1110
SKU:
48599
Type:
AC/DC Transformer Plug-In Module
Primary Voltage:
115V AC
Secondary Voltage:
-12V, -5V, +5V, +12V DC
Phase:
Single Phase
Frequency:
60 Hz
Number of Outputs:
4
Output Voltage Rails:
-12 VDC, -5 VDC, +5 VDC, +12 VDC
Form Factor:
Plug-In Module
Power Requirements:
115V AC, 60Hz, Single Phase
Condition:
Used – Inspected
Country/Region of Manufacture:
United States
Seller Notes:
Sold as pictured; plug-in module only, no external cables included.
Condition Notes:
Datatel DCP1110 AC/DC Transformer Plug-In Module in good used condition. Inspected; transformer cores and housing show light age patina, no visible damage. Front panel and hardware intact. Please contact us with any questions.
Triad Solutions ATC1 Expander Power Supply — front panel with illuminated ON/OFF rocker switch, 1A 250V fuse holder, and multi-pin circular output connector labeled 230VAC 50/60Hz 0.5A Triad Solutions ATC1 Expander Power Supply — front panel close-up showing model nameplate, rocker switch in ON position, and multi-pin circular connector
Add to Cart
Quick view

Triad Solutions ATC1 Expander Power Supply 230VAC 50/60Hz 0.5A 115VAC Input

Triad Solutions

$95.00
Was: $200.00
Triad Solutions ATC1 Expander Power Supply 230VAC 50/60Hz 0.5A 115VAC InputStep-up power supply unit designed to convert 115VAC input to 230VAC output at 0.5A capacity. Built for industrial and...
45222
SKU:
45222
Availability:
Usually ships within 1-2 business days.
Weight:
13.00 LBS
Brand:
Triad Solutions LLC
Model:
ATC1
MPN:
ATC1
Type:
Expander Power Supply
SKU:
45222
Input Voltage:
115VAC, 50/60Hz
Output Voltage:
230VAC
Output Current:
0.5A
Frequency:
50/60Hz
Fuse Rating:
2 x 1A, 250V
Connector Type:
Multi-pin circular connector (front); IEC C14 inlet (rear)
Power Switch:
Illuminated rocker switch (OFF/ON)
Form Factor:
Benchtop / Desktop enclosure
Seller Notes:
Unit only; no additional accessories included.
Country/Region of Manufacture:
United States
Condition Notes:
Triad Solutions ATC1 Expander Power Supply — inspected, in good used condition. Pulled from a working environment. Enclosure shows minor surface wear. Front switch, multi-pin connector, and rear IEC inlet appear clean and intact.
Simco F10 Top Gun static neutralizing blow off gun — front three-quarter view showing power unit with ionization tube, controls, and handheld gun with cable Simco Top Gun F10 power unit front panel — ionization knob, orange power toggle switch, and ionizer tube assembly visible
Add to Cart
Quick view

Simco F10 Top Gun 4002663 Static Neutralizing Blow Off Gun 115V 60Hz 40W

Simco

$120.00
Was: $250.00
Simco F10 Top Gun 4002663 Static Neutralizing Blow Off Gun 115V 60Hz 40WThe Simco F10 Top Gun is a benchtop static neutralizing blow off system consisting of a line-powered ionization power unit and...
46146
SKU:
46146
Availability:
Usually ships within 1–2 business days.
Weight:
7.00 LBS
Brand:
Simco
Model:
F10
MPN:
4002663
Type:
Static Neutralizing Blow Off Gun
SKU:
46146
Voltage Input:
115 VAC, 60Hz
Power:
40W
Current Rating:
0.3A
Fuse Rating:
1.0A (3AG Type, Slow-Blow)
Voltage Output:
5.8kV AC, 3mA SCC Max
Gas Input Pressure:
10 to 100 PSIG
Application:
Static Elimination, ESD Control, Ionizing Blow Off
Form Factor:
Benchtop Power Unit with Handheld Gun
Front Panel Controls:
Ionization knob, Power toggle switch (0/I)
Country/Region of Manufacture:
USA
Manufacturer Location:
The Simco Company Inc., Hatfield, PA, USA
Condition:
Used – Inspected and in Good Condition
Seller Notes:
Includes benchtop power unit and handheld blow off gun with cable.
Condition Notes:
Simco F10 Top Gun 4002663 static neutralizing blow off gun inspected and in good used condition. Power unit is clean; handheld gun housing shows scuffs and minor cracking. Emitter nozzle and wire guard intact. Includes power unit and gun with cable.