Description
Marsh Instrument 0-4000 PSI Pressure Gauge 2.25" Face 1/2" NPT 100 PSI Grad
This is an analog pressure gauge by Marsh Instrument Company, reading from 0 to 4000 PSI with a 2.25-inch dial face and a bottom-mount 1/2" NPT connection. The gauge features a cream/white dial with clear black markings graduated in 100 PSI increments, enclosed in a chrome-finish metal bezel. Marsh Instrument Company is a long-established U.S. manufacturer of industrial gauges known for straightforward, reliable mechanical pressure measurement.
Specifications & What's Included
- Brand: Marsh Instrument Company
- Pressure range: 0 – 4000 PSI
- Dial face diameter: 2.25 inches
- Graduation: 100 PSI per division
- Process connection: 1/2" NPT, bottom mount
- Unit of measure: PSI (pounds per square inch)
- Dial color: cream/white with black markings
- Bezel: chrome-finish metal
- Gauge only — no additional accessories included
Applications
Bourdon-tube analog pressure gauges like this Marsh 4000 PSI unit are standard instruments in industrial, hydraulic, pneumatic, and compressed-gas systems wherever a direct local pressure reading is needed. A 4000 PSI range makes this gauge suitable for high-pressure hydraulic circuits, pressure testing rigs, pump discharge monitoring, industrial air compressor systems, and gas cylinder regulators. The 1/2" NPT bottom connection is one of the most common pipe thread standards in North American industrial plumbing, making this gauge straightforward to install in a wide range of existing systems. Marsh gauges have been produced in the United States for over a century and are found across manufacturing plants, utilities, laboratories, and mechanical test stands. This particular face size (2.25") is a compact format commonly used in panel-mount or inline applications where space is limited.
This Marsh Instrument 0-4000 PSI Pressure Gauge has been inspected and appears to be in good condition. It was pulled from a working environment where it was in active use. The dial face is clean and legible, the chrome bezel shows light wear consistent with field use, and the 1/2" NPT fitting is intact. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
Warranty Information
Additional Information
Brand: |
Marsh Instrument Company |
Model: |
0-4000 PSI Pressure Gauge |
MPN: |
USE NO |
Type: |
Analog Pressure Gauge |
SKU: |
11114 |
Pressure Range: |
0 - 4000 PSI |
Maximum Pressure: |
4000 PSI |
Dial Size / Face Diameter: |
2.25 inches |
Graduation: |
100 PSI per graduation |
Connection Size: |
1/2 inch NPT |
Connection Location: |
Bottom / Lower Mount |
Display Type: |
Analog Dial |
Unit of Measure: |
PSI (Pounds per Square Inch) |
Dial Color: |
White / Cream |
Case / Bezel Material: |
Chrome-finish metal |
Condition: |
Used – Pulled from Working Environment |
Seller Notes: |
Gauge only; no additional accessories included. |
Country/Region of Manufacture: |
United States |
Condition Notes: |
Marsh Instrument 0-4000 PSI Pressure Gauge inspected and in good condition. Pulled from a working environment. Dial is clean and legible; 1/2" NPT fitting intact. Light wear on chrome bezel. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |
