Machine Shop Tools
-
Mountz ACL-10 H1OS Torque Screw Driver - Controller Missing Bit - As Is
Mountz
$93.00Was: $150.00Mountz ACL-10 H1OS Torque Screw Driver - Controller Missing Bit - As Is Input AC 120V 50/60Hz Cord Length- 7' Missing front bit attachment Condition: For Parts or Not WorkingThis used torque drier is missing the following parts: front...40538- SKU:
- 40538
- Weight:
- 5.00 LBS
$93.00Was: $150.00 -
Unbranded LOT OF 6 Go/No Go Gauges 3.5975, 3.08, 2.7, 0.51, 3.6225, 3.6100mm
Unbranded
$25.00Was: $60.00Unbranded LOT OF 6 Go/No Go Gauges 3.5975, 3.08, 2.7, 0.51, 3.6225, 3.6100mm Measured in millimetre QTY = 4: Thread and plug gauges 3.5975+0.025, 3.08+0.24, 2.7+0.1, 0.51+0.17 QTY = 2: Straight plugs 3.6225, 3.6100 Condition: UsedThis lot...32535- SKU:
- 32535
- Weight:
- 2.00 LBS
$25.00Was: $60.00 -
Unbranded Custom Tolerance Measurement Fixture - No Gauges - Mitutoyo 543-251B
Unbranded
$77.00Was: $138.00Unbranded Custom Tolerance Measurement Fixture - No Gauges - Mitutoyo 543-251B For use with Mitutoyo 543-251B Similar Base 6" x 8.75" Table 6.5" x 7" -- 6.25" above base. Total height 17" -- 7.4 lbs. Condition: UsedThis used measuring...30104- SKU:
- 30104
- Weight:
- 11.00 LBS
$77.00Was: $138.00 -
Scherr-Tumico 62-6381-00 100-500g 5N Precision Dial Dynamometer - 2.5 Inch Wide
Scherr-Tumico
$111.00Was: $235.00Scherr-Tumico 62-6381-00 100-500g 5N Precision Dial Dynamometer - 2.5 Inch Wide Condition: UsedThis used dynamometer has been inspected and it is in working condition. Tested with 200g and 500g calibration weights. The included original case...26725- SKU:
- 26725
- Weight:
- 4.00 LBS
$111.00Was: $235.00