Lindberg

Lindberg 54454 Hevi-Duty Tube Furnace 1700C 10kW 100V 29x3in Eurotherm

(No reviews yet) Write a Review
SKU:
53269
MPN:
54454
Condition:
Used
Availability:
Usually ships within 1-2 business days.
Weight:
215.00 LBS
Shipping:
Calculated at Checkout
  • Lindberg 54454 Hevi-Duty Tube Furnace on steel rolling cart with controller cabinet below – full system front-left view
  • Lindberg 54454 Hevi-Duty Tube Furnace blue end-panel and black vented chassis, seated on controller cabinet – side angle view
  • Lindberg 54454 nameplate label showing Model 54454, Serial No., Volts 100, Hertz 60/50, Watts 10000, Max Temp 1700C – Lindberg General Signal Watertown WI
  • Lindberg 54454 tube furnace blue front panel with circular ceramic tube opening – straight-on front view
  • Close-up of Lindberg 54454 tube furnace ceramic tube inlet showing refractory insulation and visible crack in end plug
  • Interior view through Lindberg 54454 tube furnace looking down the 29-inch ceramic tube with resistance heating elements along both sides
  • Lindberg 54454 controller cabinet front panel showing Eurotherm amp meter, programmer controller, power switch, flexible conduit, and analog meters
  • Close-up of Eurotherm Amps display panel with fuse fail and input indicators, current and load test buttons, and warning label
  • Close-up of controller programmer module with PARAM CHECK, DISPLAY, TUNE, AUTO, START, RETURN, MANUAL, STOP, LAST buttons and two analog panel meters below
  • Interior of Lindberg 54454 controller cabinet with door open showing dual transformers, wiring, terminal blocks, and contactor
  • Lindberg 54454 Hevi-Duty Tube Furnace 29" x 3" dia, Max Temp 1700, 100V, 10000W
  • Lindberg 54454 Hevi-Duty Tube Furnace 29" x 3" dia, Max Temp 1700, 100V, 10000W
  • Lindberg 54454 Hevi-Duty Tube Furnace 29" x 3" dia, Max Temp 1700, 100V, 10000W
  • Lindberg 54454 Hevi-Duty Tube Furnace 29" x 3" dia, Max Temp 1700, 100V, 10000W
  • Lindberg 54454 Hevi-Duty Tube Furnace 29" x 3" dia, Max Temp 1700, 100V, 10000W
  • Lindberg 54454 Hevi-Duty Tube Furnace 29" x 3" dia, Max Temp 1700, 100V, 10000W
$2,100.00
Was: $4,200.00
Current Stock: 1

Sold Out

Description

Lindberg 54454 Hevi-Duty Tube Furnace 1700C 10kW 100V 29x3in Eurotherm

Horizontal tube furnace designed for high-temperature laboratory and industrial materials processing. Features a ceramic heating chamber with resistance wire elements and a separate controller cabinet with integrated Eurotherm amp meter and programmer module. The unit includes mounting provisions for benchtop or cart-mounted operation.

Specifications & What's Included

  • Model: Lindberg 54454
  • Maximum rated temperature: 1700°C
  • Power rating: 10,000W (10 kW)
  • Voltage: 100V, 50/60Hz
  • Tube dimensions: 29 inches length x 3 inches diameter
  • Heating element: Resistance wire in ceramic tube
  • Controller: Eurotherm amp meter and programmer module
  • Form factor: Benchtop / Cart-Mounted
  • Manufactured in United States
  • Includes: Furnace unit and complete controller cabinet

Applications

Suitable for annealing, sintering, ceramic firing, metallurgy testing, and other high-temperature materials processing and research applications commonly found in laboratory and production environments.

Condition: Used
This Lindberg 54454 Hevi-Duty Tube Furnace has been visually inspected and shows typical wear consistent with lab use. The ceramic end plug on the tube inlet has a visible crack. The controller cabinet with Eurotherm amp display and programmer module are present and included. The unit has not been powered up or tested at our facility. Please review photos carefully and contact us with any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Lindberg
Model:
54454
MPN:
54454
SKU:
53269
Condition:
Used – Inspected
Seller Notes:
Includes furnace unit and controller cabinet with Eurotherm amp meter and programmer module
Form Factor:
Benchtop / Cart-Mounted
Country of Manufacture:
United States
Power Requirements:
100V, 50/60Hz
Power Rating:
10,000W (10 kW)
Max Temperature:
1700°C
Tube Dimensions:
29 inches length x 3 inches diameter
Frequency:
50/60 Hz
Voltage Rating:
100V
Furnace Type:
Horizontal tube with resistance wire heating elements
Controller:
Eurotherm amp meter and programmer module
Application / Use Case:
High-temperature materials processing, annealing, sintering, ceramic firing
Temperature Range:
Up to 1700°C
Heating Element:
Resistance wire elements visible inside ceramic tube
Condition Notes:
This Lindberg 54454 Hevi-Duty Tube Furnace has been visually inspected and shows typical wear consistent with lab use. The ceramic end plug on the tube inlet has a visible crack.
Maximum Temperature:
1700°C
View AllClose

Related Products

Related Products

Lindberg 54434 Hevi-Duty Tube Furnace front-left angle view showing blue front panel with tube opening and open top revealing internal components Lindberg 54434 Hevi-Duty Tube Furnace left side view showing blue panel, circular tube opening, and loose wiring leads hanging from base
Add to Cart
Quick view

Lindberg 54434 Hevi-Duty Tube Furnace 1100°C 5000W 100V 50/60Hz Benchtop

Lindberg

$850.00
Was: $1,700.00
Lindberg 54434 Hevi-Duty Tube Furnace 1100°C 5000W 100V 50/60Hz Benchtop Benchtop tube furnace designed for laboratory heat treatment, annealing, sintering, and materials research. Features a...
53268
SKU:
53268
Availability:
Usually ships within 1-2 business days.
Weight:
85.00 LBS
Brand:
Lindberg
Model:
54434
MPN:
54434
SKU:
53268
Condition:
Used – Inspected
Seller Notes:
Includes temperature probe. Ceramic end plugs show cracking from high-temperature use. Loose wiring leads present. Not bench-tested.
Form Factor:
Benchtop
Country of Manufacture:
United States
Power Requirements:
100V, 50/60Hz
Voltage Rating:
100V
Power Rating:
5000W
Frequency:
50/60 Hz
Maximum Temperature:
1100°C
Tube Length:
20 inches
Tube Diameter:
3.5 inches
Application / Use Case:
Heat treatment, annealing, sintering, materials research
Furnace Type:
Tube Furnace
Accessories Included:
Temperature probe
Compatible With:
Standard 3.5" OD process tubes (quartz or alumina)
Condition Notes:
This Lindberg 54434 benchtop tube furnace has been visually inspected and comes with the temperature probe. The ceramic end plugs at both tube openings display cracking and chipping from previous high-temperature service.
Lindberg 54341 detail of tube diameter and ceramic insulation Lindberg 54341 furnace thermal chamber and ceramic tube opening
Add to Cart
Quick view

Lindberg 54341 Hevi-Duty Horizontal Tube Furnace 1010°F 230V 24" x 2.5"

Lindberg

$900.00
Was: $1,800.00
Lindberg 54341 Hevi-Duty Horizontal Tube Furnace 1010°F 230V 24" x 2.5"This is a benchtop horizontal tube furnace designed for controlled heating in laboratory and industrial applications. The unit...
53267
SKU:
53267
Availability:
Usually ships within 1-2 business days.
Weight:
105.00 LBS
Brand:
Lindberg
Model:
54341
MPN:
54341
SKU:
53267
Condition:
Used – Pulled from Working Environment
Seller Notes:
Includes attached Type K thermocouple with yellow connector
Form Factor:
Benchtop
Furnace Type:
Horizontal Tube Furnace
Max Temperature:
1010°F
Tube Length:
24 inches
Tube Diameter (Max):
2.5 inches
Power Requirements:
230V, Single-Phase, AC
Heating Element:
Resistance wire coil elements, radial arrangement
Thermocouple Type:
Type K (yellow connector, included)
Application / Use Case:
Heat treatment, sintering, annealing, materials testing
Country of Manufacture:
USA
Manufacturer Division:
Sola Basic Industries, Watertown, WI
Condition Notes:
This Lindberg 54341 Hevi-Duty horizontal tube furnace is in used condition and has not been powered up at our facility. It shows general surface wear consistent with age and previous service use.
Manufacturer:
Sola Basic Industries
Maximum Temperature:
1010°F
Tube Diameter:
2.5 inches maximum
Heating Element Type:
Resistance wire coil, radial arrangement