Description
Liberty Pumps P382LE41 Pro 380 Series Simplex Sewage Basin 41 Gal 115V No Pump
This is the Liberty Pumps P382LE41 Pro 380 Series basin enclosure — the 41-gallon polyethylene containment vessel used in a simplex sewage ejector system. The basin is sold empty: no sewage pump, motor, control panel, float switches, or electronics are included. This is the tank body only, ready to receive a compatible pump assembly.
Specifications & What's Included
- Brand: Liberty Pumps
- Model: P382LE41
- Series: Pro 380
- System Type: Simplex Sewage System
- Basin Capacity: 41 gallons
- Voltage Rating (per nameplate): 115V
- Phase: Single Phase
- Frequency: 60 Hz
- Amperage: 12A
- Compatible Pump HP Rating: 4/10 HP
- Discharge Port: 2 in.
- Evacuation Port: 2 in.
- Vent Port: Threaded, on basin top/lid
- Body Material: Polyethylene
- Lid: Black molded lid with central access plug and two pump cord knockouts (included)
- Clear transport lid also present (visible in photos)
- Date Code: 1209 (December 2009)
- Manufactured by Liberty Pumps, Bergen, NY
- Not included: Sewage pump, motor, float switches, control panel, or any electronics
Applications
The Liberty Pumps Pro 380 Series basin is designed for residential and light-commercial simplex sewage ejector installations — typically in basement bathrooms, laundry rooms, or below-grade plumbing fixtures that sit below the main sewer line and cannot drain by gravity. The basin is buried or set into the floor and collects sewage waste; a submersible sewage pump (sold separately) mounts inside and automatically ejects the collected waste up and into the main drain line when the float switch activates. The P382LE41 is rated for a 4/10 HP pump at 115V, single phase. An empty basin like this one is the right starting point when a homeowner or plumber is replacing a failed or deteriorated tank, building out a new ejector system, or sourcing the basin separately from the pump. Liberty Pumps is a well-regarded U.S. manufacturer of residential and commercial pump systems based in Bergen, New York.
This Liberty Pumps P382LE41 Pro 380 Series sewage basin is an empty enclosure — it does not include a pump, motor, control panel, or any electronics. The basin itself has been inspected and appears to be in good used condition with normal wear consistent with prior storage or installation. The polyethylene body, lid assembly, inlet port, and vent fitting are all present and intact. Please review all photos and contact us with any questions before purchasing.
Warranty Information
Additional Information
Brand: |
Liberty Pumps |
Model: |
P382LE41 |
MPN: |
P382LE41 |
Type: |
Simplex Sewage Basin / Pump Enclosure |
SKU: |
44051 |
Series: |
Pro 380 |
Basin Capacity: |
41 Gallons |
Voltage Rating: |
115V |
Phase: |
Single Phase |
Frequency: |
60 Hz |
Current Rating: |
12 Amps |
Horsepower Rating: |
4/10 HP (compatible pump rating) |
Discharge Size: |
2 in. |
Evacuation Port Size: |
2 in. |
System Type: |
Simplex Sewage System |
Includes Pump: |
No — Basin Only |
Includes Electronics: |
No — Enclosure Only |
Material: |
Polyethylene |
Date Code: |
1209 (December 2009) |
Country/Region of Manufacture: |
United States |
Seller Notes: |
Basin enclosure only — no pump, motor, control panel, or electronics included. |
Condition Notes: |
This Liberty Pumps P382LE41 Pro 380 Series sewage basin is an empty enclosure — no pump, motor, or electronics included. Inspected and in good used condition; polyethylene body, lid, inlet port, and vent fitting are intact. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |