Description
Laney CT10 Speaker Cabinet 10" 160W 8 Ohm 97dB Reflex Bass Driver Tweeter
The Laney CT10 is a compact passive speaker cabinet built around a reflex-loaded 10" bass driver paired with a tweeter. With an 8-ohm impedance, a 160W program power handling, and a sensitivity rating of 97 dB/W at 1 meter, it pairs with a wide range of amplifier heads and powered mixers. Two 1/4" jack sockets on the rear allow for straightforward connection and daisy-chaining. The cabinet was manufactured in the UK by BLT Industries Ltd.
Specifications & What's Included
- Model: Laney CT10
- Driver: Reflex loaded 10" bass driver
- Tweeter: Yes
- Power Rating: 80W continuous / 160W program
- Impedance: 8 ohm
- Sensitivity: 97 dB/W @ 1 meter
- Frequency Response: 100 Hz – 20 kHz
- Connectors: Two 1/4" jack sockets
- Dimensions: 13"D x 12"W x 19"H
- Bass reflex port on bottom panel
- Carry handle on rear
- Four rubber feet
- Manufacturer: BLT Industries Ltd, United Kingdom
- Cabinet only — no amp head or cables included
Applications
The CT10 is a general-purpose passive speaker cabinet suited for small-to-medium stage monitoring, rehearsal spaces, small venue PA, and keyboard or guitar amplification when paired with an appropriate amplifier head or powered mixer. The reflex-loaded 10" driver provides fuller low-end extension than a sealed cabinet of comparable size, and the tweeter extends the cabinet's high-frequency response to 20 kHz — making it useful for full-range playback as well as instrument use. The CT series was part of Laney's UK-built PA and monitor line from the 1990s through early 2000s, aimed at gigging musicians and small venues needing compact, affordable cabinets.
This Laney CT10 10" Speaker Cabinet is a floor model that was never sold. We acquired it as part of a large lot of Laney gear purchased from a music store that closed, so it saw display use but no customer ownership. It may have picked up a little dust sitting in storage, but it is in excellent condition with no damage. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
Laney |
Model: |
CT10 |
MPN: |
CT10 |
Type: |
Passive Speaker Cabinet |
SKU: |
17462 |
Power Rating: |
80W Continuous, 160W Program |
Impedance: |
8 Ohm |
Driver Configuration: |
Reflex Loaded 10" Bass Driver + Tweeter |
Sensitivity: |
97 dB/W @ 1M |
Frequency Response: |
100Hz - 20kHz |
Connector Type: |
Two 1/4" Jack Sockets |
Dimensions: |
13"D x 12"W x 19"H |
Form Factor: |
Portable Floor/Stage Cabinet |
Country/Region of Manufacture: |
United Kingdom |
Manufacturer: |
BLT Industries Ltd |
Seller Notes: |
Cabinet only — no amp head or additional accessories. |
Condition Notes: |
Laney CT10 10" Speaker Cabinet — floor model, never sold. Acquired from a closed music store lot. May have light dust from storage but is in excellent condition overall. Cabinet only. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |