Kensington

Kensington Laboratories 6000 4x4 XY Linear Stage Maxon DC Motors Glass Scales

(No reviews yet) Write a Review
SKU:
36412
Condition:
Used
Availability:
Currently out of stock — contact us for availability.
Weight:
21.00 LBS
Shipping:
Calculated at Checkout
  • Kensington Laboratories 6000 4x4 XY linear stage — 3/4 front-left view showing stacked X and Y axes with two Maxon DC motors and DB-25 connectors
  • Maxon DC motor label close-up showing part number 43.034.000-22.00-007, Swiss made
  • Kensington Laboratories 6000 XY stage right-side view with Maxon motor extended and Kensington Laboratories Inc. Richmond CA nameplate visible on lower axis
  • Kensington Laboratories 6000 stage left/rear view showing manual adjustment knob on lower axis and Kensington Laboratories Inc. Richmond CA nameplate
  • Kensington Laboratories 6000 4x4 XY stage 3/4 front-right view with both Maxon DC motors extended and DB-25 connectors on both axes
  • Kensington Laboratories 6000 XY linear stage front view showing both Maxon DC motors and DB-25 multi-pin connectors on each axis
  • Kensington Laboratories 6000 stage bottom/end view showing mounting hole pattern, DB-25 connector, leadscrew shaft, and multi-pin connector
  • Kensington Laboratories 6000 interior detail view showing glass scale encoder strip, flexible cable loop, leadscrew, and multicolor wiring harness
  • Kensington Laboratories 6000 4x4 rating plate showing Model No. 6000 4x4 (+), Richmond CA 94804
$450.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

Kensington Laboratories 6000 4x4 XY Linear Stage Maxon DC Motors Glass Scales

The Kensington Laboratories 6000 is a precision two-axis (X/Y) motorized linear positioning stage with 4 inches of travel on both the X and Y axes. It is driven by Maxon Swiss-made DC motors (P/N 43.034.000-22.00-007) and uses glass scale linear encoders for closed-loop position feedback. Both axes also support manual adjustment via end knobs, making this a versatile stage for applications requiring both automated and hand-tuned positioning.

Specifications & What's Included

  • Manufacturer: Kensington Laboratories Inc., Richmond, CA
  • Model: 6000 4x4 (+)
  • Configuration: Stacked XY (two-axis) linear stage assembly
  • Travel: 4 inches on X-axis, 4 inches on Y-axis
  • Drive motors: Maxon DC motor, P/N 43.034.000-22.00-007, Swiss made — one per axis
  • Position feedback: Glass scale linear encoders (one per axis, visible in interior view)
  • Movement modes: Motorized (DC motor driven) and manual (end knobs on each axis)
  • Connectors: DB-25 multi-pin connector on each axis for motor and encoder interface
  • Top plate: Stainless steel with tapped mounting hole pattern
  • Lower axis: Black anodized aluminum housing with manual fine-adjust knob
  • Condition: Very low use; smooth axis movement, tight bearings with no detectable slop

Applications

Kensington Laboratories was a Richmond, California-based manufacturer of high-precision positioning stages used extensively in the semiconductor, photolithography, and advanced optics industries from the 1970s through the 1990s. The model 6000 series XY stages were designed for applications requiring fine, repeatable two-axis positioning — including wafer inspection, mask alignment, photolithography steppers, laser scribing, microscopy, and metrology systems. The combination of DC servo motors with glass scale feedback provides a closed-loop positioning system capable of sub-micron repeatability, which made these stages standard equipment in cleanroom and semiconductor fab environments. They are still used today in lab automation, optical bench setups, and legacy semiconductor tool maintenance, and are sought after for their robust construction and availability of compatible motion controllers.

Condition: Used
This Kensington Laboratories 6000 4x4 XY Linear Stage has been inspected and shows very little use. Both axes move smoothly and the bearings feel tight with no detectable slop. The stainless steel top plate has some adhesive residue from a removed label, and there is minor surface scuffing consistent with lab use, but overall the unit is in excellent cosmetic shape for its age. Both Maxon DC motors are present and the DB-25 connectors on each axis appear clean and undamaged. The glass scale encoder assemblies are visible and intact. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Kensington Laboratories
Model:
6000 4x4 (+)
MPN:
6000 4x4 (+)
SKU:
36412
Type:
Motorized XY Linear Stage
Axes:
2 (X and Y)
Travel Range:
4 inches X-axis, 4 inches Y-axis
Motor Type:
Maxon DC Motor
Motor Part Number:
43.034.000-22.00-007
Motor Manufacturer:
Maxon Motor (Swiss)
Position Feedback:
Glass Scale Linear Encoders
Movement Modes:
Motorized and Manual (end knobs)
Connector Type:
DB-25 (one per axis)
Country/Region of Manufacture:
United States
Manufacturer Location:
Kensington Laboratories Inc., Richmond, CA
Application:
Semiconductor, Photolithography, Microscopy, Precision Positioning
Form Factor:
Stacked XY Stage Assembly
Condition Notes:
This Kensington Laboratories 6000 4x4 XY Linear Stage shows very little use. Both axes move smoothly with tight bearings. Minor adhesive residue on top plate. Maxon DC motors and DB-25 connectors present and undamaged.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose