Description
ITS UC-7010 Microprocessor Wafer Box Washer 208VAC 3PH 20A 60Hz Semiconductor
Floor-mounted wafer box cleaning system with microprocessor control for semiconductor and clean room applications. Uses LMI Milton Roy chemical dosing pump and stainless steel wash chamber with wire basket carriers.
Specifications & What's Included
- Model: UC-7010 | Control: ITS TYMKON Microprocessor Control Center
- Power: 208VAC, 3-Phase, 20A, 60Hz with 3-pole 20A circuit breakers
- Chemical Tank: 3-gallon capacity with LMI Milton Roy dosing pump
- Wash Chamber: Stainless steel construction with included wire basket carriers
- Nitrogen Inlet: 60 PSI | DI Water Inlet: Yes | Exhaust: 100 CFM
- Enclosure: Stainless steel top section, polypropylene lower housing
- Manufactured: October 1992, United States
Applications
Designed for semiconductor wafer box and carrier cleaning in fab and clean room environments. The microprocessor-controlled system manages wash cycles, chemical dispensing, and rinse operations. Typically used in wafer processing facilities for pre-operation carrier preparation and contamination removal.
Condition: Used
This ITS UC-7010 Microprocessor Wafer Box Washer has been inspected and appears to be in good used condition. The stainless steel upper enclosure and wash chamber show normal wear consistent with prior fab use but no significant damage. The TYMKON control panel, keypad, and indicator displays appear intact. The LMI Milton Roy chemical dosing pump, Dayton pump motor, and internal plumbing are all present and connected. The white polymer lower enclosure and drip tray show some light discoloration but are structurally sound. Stainless wire wafer box baskets are included in the wash chamber. Please view our photo set and contact us if you have any questions.
This ITS UC-7010 Microprocessor Wafer Box Washer has been inspected and appears to be in good used condition. The stainless steel upper enclosure and wash chamber show normal wear consistent with prior fab use but no significant damage. The TYMKON control panel, keypad, and indicator displays appear intact. The LMI Milton Roy chemical dosing pump, Dayton pump motor, and internal plumbing are all present and connected. The white polymer lower enclosure and drip tray show some light discoloration but are structurally sound. Stainless wire wafer box baskets are included in the wash chamber. Please view our photo set and contact us if you have any questions.
Warranty Information
We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose
Additional Information
Brand: |
ITS |
Model: |
UC-7010 |
MPN: |
UC-7010 |
Type: |
Microprocessor Controlled Wafer Box Washer |
SKU: |
43937 |
Condition: |
Used – Inspected, Appears in Good Condition |
Voltage Rating: |
208VAC |
Current Rating (Amps): |
20A |
Phase: |
Three Phase |
Frequency: |
60Hz |
Power Requirements: |
208VAC, 3-Phase, 20A, 60Hz |
Control System: |
ITS TYMKON Microprocessor Control Center |
Chemical Pump: |
LMI Milton Roy Chemical Dosing Pump |
Chemical Tank Capacity: |
3 Gallons (Max Cap 3 Gal.) |
Nitrogen Inlet Pressure: |
60 PSI |
Exhaust: |
100 CFM |
DI Water Inlet: |
Yes |
Circuit Breakers: |
3-pole, 20A per pole |
Wash Chamber: |
Stainless steel with stainless wire basket carriers |
Construction: |
Stainless steel top section, polypropylene/polymer lower enclosure |
Application / Use Case: |
Semiconductor wafer box / carrier cleaning, clean room |
Form Factor: |
Freestanding Floor Unit |
Manufacture Date: |
10-30-1992 |
Country/Region of Manufacture: |
United States |
Seller Notes: |
Includes stainless wire wafer box baskets visible in wash chamber |
Condition Notes: |
ITS UC-7010 Wafer Box Washer inspected and in good used condition. Stainless wash chamber and TYMKON control panel intact. LMI pump, Dayton motor, and plumbing present. Wire baskets included. Normal wear from prior fab use. |
