Description
InterSense IS-600 Mark 2 Plus Inertial Position Orientation Tracking System RS-232
6-DOF inertial position and orientation tracking system combining InertiaCube inertial measurement with ultrasonic ranging. Provides real-time tracking data via RS-232 interface.
Specifications & What's Included
- Base unit with firmware v3.1000rB
- 4 X-Bar ultrasonic/inertial sensor heads on cross-arm array (56 in. span, 38 in. head spacing)
- Interface: RS-232 (DB9), BNC Sync In/Out
- Sync input: NTSC or TTL (switch selectable)
- Power: 100-240VAC, 50/60Hz
- 6 degrees of freedom tracking (position + orientation)
Applications
This system was used for motion capture, virtual reality applications, and simulation platforms requiring real-time position and orientation data. The IS-600 integrates inertial sensors with ultrasonic distance measurement to provide continuous 6-DOF tracking in lab and development environments. Historically deployed in academic research, VR development, and motion analysis setups.
Condition: Used
This InterSense IS-600 Mark 2 Plus Inertial Position and Orientation Tracking System has been inspected and appears to be in good condition. The base unit and cross-arm sensor array are both present. The array spans approximately 56 inches across with 38 inches between sensor heads. No additional accessories beyond what is shown in the photos are included — no software, cabling beyond what is visible, or documentation. The unit shows minor signs of use consistent with its age and category. Please view our photo set and contact us if you have any questions.
This InterSense IS-600 Mark 2 Plus Inertial Position and Orientation Tracking System has been inspected and appears to be in good condition. The base unit and cross-arm sensor array are both present. The array spans approximately 56 inches across with 38 inches between sensor heads. No additional accessories beyond what is shown in the photos are included — no software, cabling beyond what is visible, or documentation. The unit shows minor signs of use consistent with its age and category. Please view our photo set and contact us if you have any questions.
Warranty Information
We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose
Additional Information
Brand: |
InterSense |
Model: |
IS-600 Mark 2 Plus |
MPN: |
IS-600 Mark 2 Plus |
Type: |
Inertial Position and Orientation Tracking System |
SKU: |
38663 |
Seller Notes: |
Includes IS-600 Mark 2 Plus base unit and 4 X-Bar sensor heads on cross-arm array. No other accessories. |
Country/Region of Manufacture: |
United States |
Form Factor: |
Benchtop / Free-Standing |
Power Requirements: |
100-240VAC, 50/60Hz |
Fuse Rating: |
100-120VAC: T260V 1A; 200-240VAC: T260V 0.5A |
Firmware Version: |
v3.1000rB |
Serial Number Range: |
P2B8907023-A |
Interface: |
RS-232 (DB9), BNC Sync In, BNC Sync Out |
Sync Input Type: |
NTSC or TTL (switch selectable) |
Number of Sensor Ports: |
4 (X-Bar 1 through X-Bar 4) |
Sensor Head Configuration: |
4 X-Bar ultrasonic/inertial sensor heads |
Array Span: |
56 in. across |
Head Spacing: |
38 in. between heads |
Tracking Technology: |
Inertial (InertiaCube) with ultrasonic ranging |
Application: |
6-DOF position and orientation tracking, VR, simulation |
Degrees of Freedom: |
6-DOF (position + orientation) |
Condition: |
Used – Inspected, appears in good condition |
Condition Notes: |
InterSense IS-600 Mark 2 Plus inertial tracking system inspected and in good condition. Includes base unit and 4-head X-Bar sensor array (56 in. span). No accessories beyond what is shown. Minor use wear. |
