IEC

IEC MB Micro Hematocrit Centrifuge Damon/IEC 11500 RPM 24-Tube 115V Cat 275

(No reviews yet) Write a Review
SKU:
44771
Condition:
Used
Availability:
Currently out of stock — contact us for availability.
Weight:
24.00 LBS
Shipping:
Calculated at Checkout
  • IEC MB Micro Hematocrit Centrifuge front view — lid closed, TIMER knob and BRAKE button on front panel, Damon/IEC Division label, capillary tube holder tool with chain
  • IEC MB Micro Hematocrit Centrifuge lid open — aluminum 24-slot rotor visible with red safety gasket on lid rim, front control panel and capillary holder tool shown
  • IEC MB centrifuge rotor close-up — numbered capillary tube slots (1–24), center spindle hub, red gasket seal on rotor housing rim
  • IEC MB centrifuge rotor top face — Cat. No. 275 label, Pat. No. 2,783,938, 'Designed for Use on International Centrifuges Only', IEC Made in USA stamp
  • IEC MB centrifuge rotor label close-up — Cat. No. 275, Patent No. 2,783,938, IEC International Made in USA marking
  • IEC MB Centrifuge front control panel close-up — TIMER dial (0–14 minute graduations), BRAKE button with 'Release When Head Stops' text, Damon/IEC Division label
  • IEC MB Centrifuge Micro Hematocrit nameplate close-up on lid — white text on orange-red label reading 'IEC MB CENTRIFUGE MICRO HEMATOCRIT'
  • IEC MB Micro Hematocrit Centrifuge rear view — ventilation grille, lid safety latch, power cord exit
  • IEC MB Centrifuge rating plate — Model MB, Serial No. 37824P-1, 115V, 60 CY, 1.5A, Made in USA by International Equipment Company, Needham Heights MA
$150.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

IEC MB Micro Hematocrit Centrifuge Damon/IEC 11500 RPM 24-Tube 115V Cat 275

The IEC MB Micro Hematocrit Centrifuge is a benchtop clinical laboratory centrifuge manufactured by International Equipment Company (IEC), sold under the Damon/IEC Division name. It is designed specifically for micro hematocrit determination — spinning capillary tubes at high speed to separate blood components and measure packed cell volume (PCV/hematocrit). The unit features a 15-minute timer dial, an electronic motor braking system, and a safety lid latch that holds the lid closed during operation.

Specifications & What's Included

  • Manufacturer: International Equipment Company (IEC) — Damon/IEC Division, Needham Heights, MA, USA
  • Model: MB (IEC MB Centrifuge — Micro Hematocrit)
  • Maximum Speed: 11,500 RPM
  • Timer: 0–15 minute dial timer
  • Tube Capacity: 24 capillary tubes in numbered slots
  • Tube Size: 1.75 x 75 mm capillary tubes
  • Braking: Electronic motor braking system
  • Safety: Lid safety latch
  • Input Voltage: 115V, 60 Hz, 1.5A
  • Rotor: Cat. No. 275 (aluminum, 24-slot, numbered; Pat. No. 2,783,938) — included
  • Rear ventilation grille for motor cooling
  • Includes: Rotor (Cat. No. 275) and capillary tube holder tool with chain
  • Made in USA

Applications

The IEC MB Micro Hematocrit Centrifuge is used in clinical and research laboratories to determine hematocrit (packed cell volume) from small blood samples collected in heparinized capillary tubes. The technique involves loading filled capillary tubes into the numbered rotor slots, centrifuging at high speed to pack red blood cells to one end, and reading the resulting PCV percentage against a hematocrit chart. This type of centrifuge is a standard instrument in hematology labs, physician office labs, veterinary clinics, blood banks, and research facilities where rapid hematocrit determinations are needed. The IEC MB dates from the 1970s–1980s era of Damon/IEC Division production, when IEC was a leading U.S. manufacturer of laboratory centrifuges based in Needham Heights, Massachusetts. Despite its age, the micro hematocrit method remains in widespread use today, and replacement rotors and capillary tubes for IEC MB-compatible instruments are still commercially available.

Condition: Used
This IEC MB Micro Hematocrit Centrifuge by Damon/IEC Division has been inspected and appears to be in good used condition. The gray hammertone housing shows light surface wear and minor scuffing consistent with laboratory use, but there is no cracking, denting, or significant damage visible. The black dome lid, front control panel, TIMER dial, and BRAKE button all appear intact. The aluminum 24-slot rotor (Cat. No. 275) is included and looks clean with no visible damage to the numbered capillary slots. A capillary tube holder tool with chain is also included. The power cord is present and intact. This unit was pulled from a working environment where it was previously in use. Please view our photo set and contact us if you have any questions.
Medical Device Disclosure
Thanks for your interest. Recycled Goods Inc., Ventura, CA.

FDA Regulation and Certification: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not purchase this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping.

Upon receipt, it is the BUYER'S responsibility to have this instrument checked and certified for use by a qualified Technician prior to placing it into use or service.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
International Equipment Company (IEC)
Model:
MB
MPN:
MB
Type:
Micro Hematocrit Centrifuge
SKU:
44771
Seller Notes:
Includes rotor (Cat. No. 275) and capillary tube holder tool with chain.
Country/Region of Manufacture:
United States
Form Factor:
Benchtop
Power Requirements:
115V, 60 Hz, 1.5A
Voltage:
115V
Amperage:
1.5A
Frequency:
60 Hz
Maximum Speed:
11,500 RPM
Timer Range:
0–15 minutes
Tube Capacity:
24 capillary tubes
Tube Size:
1.75 x 75 mm capillary tubes
Rotor Cat. No.:
275
Rotor Patent No.:
2,783,938
Braking System:
Electronic motor braking
Safety Feature:
Safety lid latch
Division / Marketing Name:
Damon/IEC Division
Manufacturer Location:
Needham Heights, Massachusetts, USA
Application:
Packed cell volume (hematocrit) determination
Compatible With:
IEC International Centrifuges — Cat. No. 275 rotor
Condition Notes:
This IEC MB Micro Hematocrit Centrifuge shows light surface wear on the housing consistent with lab use. Rotor (Cat. No. 275) and capillary tube holder tool included. Pulled from a working environment. Please contact us with any questions.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose