Hydac

Hydac Accumulator Charging & Testing Kit 3500 psi 250 bar w/ Gauge Hoses

(No reviews yet) Write a Review
SKU:
45458
Condition:
Used
Availability:
Currently out of stock — contact us for availability.
Weight:
8.00 LBS
Shipping:
Calculated at Checkout
  • Hydac accumulator charging and testing kit open in red carry case showing gauge, hose, and brass fittings in foam cutouts
  • Hydac accumulator test kit top-down view in red case — gauge assembly centered, two hoses coiled, brass fittings and spanner wrench visible
  • Hydac accumulator kit components laid out in front of red HYDAC-branded carry case — gauge valve assembly, two hoses, and brass fittings
  • Close-up of Hydac-branded hydraulic hose ends with large brass hex fittings and internal sealing faces
  • Close-up of hydraulic hose ends with smaller brass male fittings — nitrogen-side connections for accumulator charging
  • Hydac test valve assembly with 0–3500 psi / 0–250 bar dual-scale gauge, brass body, knurled knob, and male threaded port
  • Rear/side view of Hydac test valve body showing quick-connect nitrogen fill port and gauge mounting
  • Set of brass and steel hydraulic adapter fittings included with the Hydac accumulator test kit — seven pieces ranging from hex nuts to quick-connect nipple to elbow
$300.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

Hydac Accumulator Charging & Testing Kit 3500 psi 250 bar w/ Gauge Hoses

This Hydac hydraulic accumulator charging and testing kit is a complete, self-contained portable unit for checking and adjusting the nitrogen pre-charge pressure in hydraulic accumulators. The kit includes a test valve and pressure gauge assembly, two hydraulic hoses with brass fittings, a set of adapter fittings, and a red molded carry case with custom foam insert. The gauge reads dual-scale: 0–3500 psi and 0–250 bar, matching the kit's rated maximum pressure. Hydac labels this product the "Füll- und Prüfvorrichtung für Hydrospeicher" (Charging and Testing Unit for Accumulators), as seen on the case lid.

Specifications & What's Included

  • Brand: Hydac
  • Maximum rated pressure: 3500 psi / 250 bar
  • Gauge range: 0–3500 psi / 0–250 bar, dual-scale analog dial
  • Test valve body: brass, with knurled adjustment knob and quick-connect nitrogen port
  • Hoses: two Hydac-branded high-pressure hydraulic hoses with brass hex end fittings
  • Adapter fittings: set of seven brass and steel hydraulic adapters (hex nuts, male threaded, quick-connect nipple, elbow)
  • Carry case: red hard-shell molded case with foam cutout insert, 18 x 13 x 5 in
  • Spanner/open-end wrench included (visible in case)

Applications

Hydac accumulator charging and testing kits are standard service tools used with bladder, piston, and diaphragm-type hydraulic accumulators in industrial hydraulic systems. Hydraulic accumulators store pressurized fluid energy by compressing a nitrogen gas charge; over time the pre-charge pressure drops and must be checked and restored to maintain system performance. This kit connects between a nitrogen bottle and the accumulator's gas valve, allowing a technician to read the current pre-charge pressure and add or release nitrogen as needed. These kits are used across industries including mobile hydraulics, industrial machinery, injection molding, presses, and any hydraulic circuit incorporating accumulators for energy storage, pulsation damping, or emergency actuation. Hydac is a well-established German manufacturer of hydraulic components, with accumulator service tools of this type being a staple of preventive maintenance programs on hydraulic equipment worldwide.

Condition: Used
This Hydac Accumulator Charging and Testing Kit (3500 psi / 250 bar) has been inspected and appears to be in good used condition. The kit includes the test valve and gauge assembly, two hydraulic hoses, a set of brass adapter fittings, and the original red carry case with foam insert. Components show light surface wear and some patina on the brass fittings consistent with prior use, but no visible damage to the gauge face, hose connections, or case. The carry case is intact and closes securely. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Hydac
Model:
Accumulator Charging & Testing Kit
Type:
Hydraulic Accumulator Charging and Testing Kit
Maximum Pressure:
3500 psi / 250 bar
Gauge Range:
0–3500 psi / 0–250 bar
Includes:
Test valve/gauge assembly, 2 hoses, brass fittings, carry case
Case Dimensions:
18 x 13 x 5 in
Case Color:
Red
Application:
Hydraulic accumulator pre-charge testing and nitrogen charging
Compatible With:
Bladder, piston, and diaphragm hydraulic accumulators
Connector Type:
Brass hydraulic fittings; quick-connect nitrogen valve
Country/Region of Manufacture:
Germany
SKU:
45458
Seller Notes:
Includes test valve/gauge assembly, two hoses, brass fittings set, and red carry case.
Condition Notes:
This Hydac Accumulator Charging & Testing Kit (3500 psi / 250 bar) has been inspected and is in good used condition. Includes gauge assembly, two hoses, brass fittings, and red carry case. Light wear on brass fittings; no damage to gauge or hoses.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose