Description
HP RH3-2195 Power Supply Board for HP LaserJet 5000 5000N 5000GN Printer
The HP RH3-2195 is the internal power supply board used in HP LaserJet 5000 series laser printers, including the 5000, 5000N, and 5000GN models. This open-frame PCB board converts AC line power to the regulated DC voltages required by the printer's fusing assembly, DC controller, and paper-handling components. It is a direct OEM replacement part for the HP LaserJet 5000 platform.
Specifications & What's Included
- Part Number: RH3-2195
- Type: Internal open-frame power supply board (PCB)
- Compatible with: HP LaserJet 5000, 5000N, 5000GN
- PCB markings: Primary Side / Secondary Side (silkscreened on board)
- Key components visible: large electrolytic capacitors (1000µF / 200V, Sanken-brand components), toroidal power inductor, main power transformer, multi-pin output connector strip
- Board manufacturer component brand: Sanken (visible on PCB silkscreen)
- Includes: board only — no cables, mounting hardware, or enclosure
Applications
The HP LaserJet 5000 series was HP's mid-range monochrome laser printer line from the late 1990s, targeted at workgroups and small offices requiring reliable, high-volume printing. The RH3-2195 power supply board is the heart of the printer's power delivery system, providing regulated DC outputs to the high-voltage fuser unit, DC motor controllers, and logic boards. These OEM power supply boards are commonly needed for printer repair and maintenance, as power supply failure is one of the most frequent service issues in this printer generation. Technicians and repair shops working on LaserJet 5000 series machines use this board as a direct drop-in replacement to restore full printer operation.
This HP RH3-2195 internal power supply board for the LaserJet 5000 series has been inspected and appears to be in good used condition. It was pulled from a working printer environment where it was previously in service. The board shows normal light wear consistent with use; components appear intact with no obvious damage visible. Photos show both the primary and secondary sides of the board clearly — please review them carefully before purchasing. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
HP |
Model: |
RH3-2195 |
MPN: |
RH3-2195 |
SKU: |
28991 |
Type: |
Internal Printer Power Supply Board |
Compatible With: |
HP LaserJet 5000 |
Compatible With 2: |
HP LaserJet 5000N |
Compatible With 3: |
HP LaserJet 5000GN |
Form Factor: |
PCB / Open-Frame Board |
Seller Notes: |
Board only — no cables or mounting hardware included. |
Country/Region of Manufacture: |
Japan |
Interface / Connector: |
Multi-pin board connector |
PCB Marking: |
Primary Side / Secondary Side — Sanken components |
Condition Notes: |
This HP RH3-2195 LaserJet 5000 power supply board has been inspected and appears to be in good used condition. Pulled from a working printer environment. Normal light wear; components appear intact. Please review all photos before purchasing. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |