Description
HP J2606A Fiber Optic Transceiver Module J2606-60001 SMF/MMF
The HP J2606A is a pluggable fiber optic transceiver module designed for use in ProCurve and other compatible enterprise network switches and routers. This module supports both single-mode fiber (SMF) and multimode fiber (MMF) connections, making it suitable for both short-haul local-area and long-distance metropolitan-area network deployments. The J2606A operates at gigabit Ethernet speeds (1.25 Gbps) and is a hot-swappable component that enables rapid upgrades or replacements in production network environments.
Specifications & What's Included
- Model: HP J2606A
- Part Number: J2606-60001
- Type: Fiber Optic Transceiver Module (SFP/GBIC variant)
- Data Rate: Gigabit Ethernet (1.25 Gbps)
- Fiber Type: Single-Mode Fiber (SMF) and Multimode Fiber (MMF) support
- Connector: LC or SC (configuration dependent)
- Form Factor: Pluggable transceiver (hot-swappable)
- Wavelength: Typically 1310 nm or 1550 nm depending on configuration
- Distance: Supports distances from 2 km to 80+ km depending on fiber type and wavelength
- Operating Temperature: 0 to 70°C (typical)
- Module only — no cables, adapters, or mounting hardware included
Applications
The J2606A transceiver module is used in HP ProCurve and compatible network infrastructure for enterprise data center, campus, and wide-area network (WAN) connectivity. These modules are found in core network switches, edge routers, and aggregation devices in organizations ranging from mid-size enterprises to large data centers. Single-mode variants support long-distance, low-loss backbone connections between buildings or across metropolitan areas, while multimode versions serve shorter local-area applications. The hot-swappable design allows network technicians to upgrade link speeds or replace failed optics without powering down the entire switch. This type of module has been standard in enterprise networking since the early 2000s and remains in active use today in legacy and current network infrastructure.
This HP J2606A Fiber Optic Transceiver Module has been inspected and is in good used condition. It was pulled from a working network environment and shows normal cosmetic wear consistent with its age. The module has not been powered up or tested at our facility, but comes from an operational system where it was previously in service. Please contact us before purchasing if you have questions about compatibility or functionality. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
Warranty Information
Additional Information
Brand: |
HP |
Model: |
J2606A |
MPN: |
J2606-60001 |
Type: |
Fiber Optic Transceiver Module |
SKU: |
10879 |
Interface Type: |
Single-Mode Fiber (SMF), Multimode Fiber (MMF) |
Connector Type: |
LC or SC (varies by configuration) |
Form Factor: |
Pluggable Transceiver Module |
Data Rate: |
Gigabit Ethernet (1.25 Gbps) |
Compatible With: |
HP ProCurve, HP Arista, and compatible network switches |
Seller Notes: |
Module only; no cables or accessories included |
Country/Region of Manufacture: |
Taiwan or Malaysia (typical for HP optics) |
Condition Notes: |
HP J2606A fiber optic transceiver module, used condition. Pulled from working environment. Not tested at our facility. Contact us with any questions. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |
