Description
HP D3393-60003 D3393-69003 Vectra VL/5 Socket 5 Pentium System Board Motherboard
The HP D3393-60003 is the system board for the HP Vectra VL/5 desktop, built around a Socket 5 ZIF processor socket for Intel Pentium CPUs. Socket 5 is the 320-pin staggered-pin-grid-array socket used by 3.3 V Pentium processors in the mid-1990s, and it was paired with a 430-series-era PCI/ISA chipset design. On this board the CPU socket, SIMM memory sockets, drive connectors and rear I/O sit on a single HP-specific board layout rather than a generic AT or ATX outline. The photos show a board label reading D3393-69003, a bank of DIP switches and a labeled BUS SPEED jumper.
Specifications & What's Included
- Manufacturer part number: D3393-60003
- Board label reads: D3393-69003 (R 6542 012)
- Platform: HP Vectra VL/5
- CPU socket: Socket 5 ZIF (Intel Pentium compatible); socket is empty
- Form factor: proprietary HP desktop board
- Memory: row of SIMM sockets along the top edge of the board
- Drive connectors: IDE and floppy drive connectors on board
- Rear I/O: DB-25 parallel port
- Rear I/O: two DB-9 serial ports
- Rear I/O: two PS/2 ports (keyboard and mouse)
- Rear I/O: VGA (DB-15) video connector
- Two card-edge connectors along one edge of the board
- Configuration: 8-position DIP switch bank and a jumper labeled BUS SPEED (J6)
- Rear I/O bracket attached to the board
- Included: board only, no CPU, RAM or cables
Applications
The Vectra VL/5 belongs to HP's Vectra line of business desktops from the mid-1990s, the period when Pentium Socket 5 and 7 platforms were replacing 486-class systems and PCI was displacing VL-bus and ISA-only designs. The board is a like-for-like replacement part for Vectra VL/5 repair and for retro PC restoration work.
- Industries & settings: Corporate, institutional and educational desktop fleets of the mid-1990s; legacy-system maintenance; retro computing and restoration.
- Typical applications: Repairing or rebuilding an HP Vectra VL/5, and running period software such as MS-DOS, Windows 3.x, Windows 95 and Windows NT-era workloads on Pentium hardware.
- Compatible systems: HP Vectra VL/5 desktops. HP-specific board geometry means it is intended for the Vectra chassis, not for generic AT or ATX cases.
This HP Vectra VL/5 D3393-60003 Socket 5 motherboard (system board) has been tested and confirmed in working order. It is in good used condition with normal wear from its prior installation in a desktop system. The photos show no visible damage to the board, and the rear I/O ports and connectors appear intact. This is the board only, with no CPU, RAM or cables included. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
Warranty Information
Additional Information
Brand: |
HP |
Model: |
D3393-60003 |
MPN: |
D3393-60003 |
Type: |
Desktop Motherboard / System Board |
SKU: |
12175 |
Compatible With: |
HP Vectra VL/5 |
Socket Type: |
Socket 5 |
Form Factor: |
Proprietary Desktop |
Processor Compatibility: |
Intel Pentium (Socket 5) |
Condition: |
Used – Inspected and Tested |
Country/Region of Manufacture: |
United States |
Seller Notes: |
Board only — no CPU, RAM or cables included |
Condition Notes: |
HP Vectra VL/5 D3393-60003 Socket 5 motherboard, tested and confirmed in working order. Good used condition with normal installation wear. Board only, no CPU or RAM. Please view photos and contact us with questions. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |
Secondary Model: |
D3393-69003 (as printed on board label) |
Memory Type: |
SIMM |
Rear Ports: |
DB-25 parallel, 2x DB-9 serial, 2x PS/2, VGA |