Description
HP D3341A 9B2001-043 4.2GB Half-Height SCSI Hard Drive D3341-60020 HH
The HP Hewlett-Packard D3341A is a 4.2GB half-height (HH) SCSI hard drive produced in Singapore. It uses a 50-pin SCSI interface and occupies a standard half-height 3.5" drive bay, making it a direct-fit replacement in HP workstations, servers, and compatible SCSI systems of its era. The factory part number is D3341-60020, with replacement and exchange variants D3341-63020 and D3341-69020 respectively.
Specifications & What's Included
- Manufacturer: Hewlett-Packard
- Model / Accessory Number: D3341A
- Part Number: 9B2001-043
- Factory P/N: D3341-60020
- Replacement P/N: D3341-63020
- Exchange P/N: D3341-69020
- Lot / Reference P/N: A-02-9708-2
- Storage Capacity: 4.2 GB
- Interface: SCSI (50-pin)
- Form Factor: Half-Height (HH)
- Hardware Revision: 010632
- Country of Manufacture: Singapore
- Drive only — no additional accessories included
Applications
The D3341A is a mid-1990s half-height SCSI hard drive from Hewlett-Packard, produced during the period when parallel SCSI was the dominant interface for enterprise workstations and servers. Drives of this type were widely used in HP 9000 workstations, HP NetServer systems, and other SCSI-based platforms of the era, providing primary or secondary fixed storage. SCSI drives were favored over contemporary IDE drives in professional environments because of their faster sustained throughput, support for multiple devices on a single bus, and ability to handle simultaneous I/O from multiple hosts. Today, 4.2GB SCSI drives like this one are primarily sought by technicians and collectors maintaining legacy HP systems, vintage UNIX workstations, industrial controllers, and other equipment that still relies on narrow SCSI storage and cannot accommodate modern drives without significant hardware changes.
This HP Hewlett-Packard D3341A 4.2GB Half-Height SCSI Hard Drive (P/N 9B2001-043) has been inspected, cleaned, and tested at our facility and is in very good working condition. The drive exterior shows typical light wear consistent with previous use. The label is intact and legible, the 50-pin SCSI connector and power connector are in good shape, and the PCB shows no visible damage. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
HP |
Model: |
D3341A |
MPN: |
9B2001-043 |
Secondary Model: |
D3341-60020 |
Type: |
SCSI Hard Drive |
SKU: |
39108 |
Storage Capacity: |
4.2 GB |
Interface: |
SCSI |
Form Factor: |
Half-Height (HH) |
Connector Type: |
50-Pin SCSI |
Replacement P/N: |
D3341-63020 |
Exchange P/N: |
D3341-69020 |
Lot/Ref P/N: |
A-02-9708-2 |
Hardware Revision: |
010632 |
Country/Region of Manufacture: |
Singapore |
Condition: |
Used – Inspected and Tested |
Seller Notes: |
Drive only; no additional accessories included. |
Compatible With: |
HP workstations, servers, and systems requiring 4.2GB SCSI storage |
Condition Notes: |
HP D3341A 4.2GB SCSI Hard Drive (9B2001-043) inspected, cleaned, and tested — in very good working condition. Exterior shows light wear. Label intact, connectors good, PCB undamaged. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |
