HP 8711C 8712C 8713C 8714C 8730A 08712-90059 RF Network Analyzer Service Guide

HP 8711C 8712C 8713C 8714C 8730A 08712-90059 RF Network Analyzer Service Guide 1996

This is the original Hewlett-Packard Service Guide for the HP 8711C, 8712C, 8713C, and 8714C RF Network Analyzers and the HP 8730A Tuner Analyzer, published under HP part number 08712-90059 in October 1996. The guide covers performance tests, calibration adjustments, assembly replacement procedures, and troubleshooting — the primary reference for technicians servicing any of these instruments.

Specifications & What's Included

• Publication / Part Number: 08712-90059
• Print Date: October 1996
• Publisher: Hewlett-Packard (HP)
• Covers: HP 8711C, HP 8712C, HP 8713C, HP 8714C RF Network Analyzers
• Also covers: HP 8730A Tuner Analyzer
• Document type: Service Guide (printed, three-ring binder format)
• Language: English
• Country of origin: Printed in USA
• Contents include: Performance Tests, Adjustments (correction constants, frequency accuracy, gain, power, detector corrections), Assembly Replacement procedures (CPU board, front panel, source, receiver, power supply, disk drive assemblies), Troubleshooting & Block Diagrams (error messages, category failures, assembly-level fault isolation)

Applications

The HP 8711C, 8712C, 8713C, and 8714C are scalar and vector RF network analyzers from Hewlett-Packard's economy network analyzer line, introduced in the mid-1990s for testing RF components and subsystems such as filters, amplifiers, cables, and antennas across frequency ranges from 300 kHz into the GHz range depending on model. The HP 8730A is a companion tuner analyzer designed for cable TV and broadcast applications. These instruments were widely used in RF component manufacturing, telecommunications equipment development, cable television system testing, and RF laboratory environments. Service documentation of this type is essential for calibration technicians, repair shops, and labs that maintain these analyzers in-house — covering not only step-by-step adjustment procedures but also the block-diagram-level troubleshooting needed to isolate failed assemblies. Manuals printed in this era are specific to the instrument generation and cover the hardware architecture of these units in detail not available in later Agilent or Keysight reissues.