null
HP

HP 5064-5872 PCBA SCSI Terminator Card 40-Pin Edge Connector Hewlett-Packard

(No reviews yet) Write a Review
SKU:
15558
MPN:
5064-5827
Condition:
Used
Availability:
Usually ships within 1-2 business days.
Weight:
1.00 LBS
Shipping:
Calculated at Checkout
  • HP 5064-5872 PCBA SCSI Terminator Card – top view showing green PCB with multiple ICs and 40-pin gold edge connector
  • HP 5064-5872 SCSI Terminator Card – bottom/solder side view showing PCB traces and markings including FTMI20 and FT16
  • HP 5064-5872 SCSI Terminator Card – close-up of barcode label showing part number 5064-5872 and serial number, with Hitachi H4N5256DPP memory chip visible
$15.00
Was: $30.00
Current Stock: 1

Sold Out

Description

HP 5064-5872 PCBA SCSI Terminator Card 40-Pin Edge Connector Hewlett-Packard

The HP 5064-5872 is a printed circuit board assembly (PCBA) SCSI terminator card designed for use in Hewlett-Packard workstations and servers. It connects via a 40-pin edge connector and provides proper bus termination for the internal SCSI chain, which is required for reliable operation of SCSI devices within a system. The board is a compact, standalone module populated with multiple ICs including Hitachi H4N5256DPP memory/logic devices visible on the component side.

Specifications & What's Included

  • Part Number: HP 5064-5872
  • Type: SCSI Terminator Card / PCBA (Printed Circuit Board Assembly)
  • Interface: SCSI (Small Computer System Interface)
  • Connector: 40-pin gold edge connector
  • Form Factor: Compact PCB module / daughter card
  • Visible ICs: Hitachi H4N5256DPP memory/logic chips (multiple), additional logic ICs on component side
  • PCB markings visible: FTMI20, FT16 (solder side)
  • Barcode label: part number 5064-5872 confirmed on unit
  • Card only — no cables, brackets, or mounting hardware included

Applications

SCSI terminator cards like the HP 5064-5872 are used to properly terminate the SCSI bus in HP workstations and servers. SCSI requires termination at both ends of the device chain to prevent signal reflections that cause data errors or communication failures. Internal terminator cards of this type were commonly used in HP 9000 workstations, HP Vectra, and similar HP systems from the late 1980s through the 2000s that relied on SCSI for hard drive, tape drive, and optical drive connectivity. Replacement and spare terminator modules remain in demand for legacy HP system maintenance, repair, and refurbishment. SCSI infrastructure of this generation is largely obsolete in new builds but continues to see use in industrial, scientific, and legacy data environments where original HP hardware remains in service.

Condition: Used
This HP 5064-5872 PCBA SCSI Terminator Card has been inspected and appears to be in good condition. It has not been powered or tested at our facility. The PCB and edge connector look clean with no obvious physical damage visible in the photos. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Hewlett-Packard
Model:
5064-5872
MPN:
5064-5872
SKU:
15558
Type:
SCSI Terminator Card / PCBA
Interface:
SCSI
Connector Type:
40-Pin Edge Connector
Form Factor:
Card / Module (PCBA)
Compatible With:
HP Workstations and Servers with internal SCSI bus
Condition:
Used – Inspected, Not Bench-Tested
Seller Notes:
Card only; no cables or brackets included.
Country/Region of Manufacture:
United States
Condition Notes:
HP 5064-5872 SCSI Terminator Card inspected and in good condition. Not bench-tested at our facility. PCB and 40-pin edge connector appear clean with no visible damage. Please view photos and contact us with questions.
View AllClose