Description
HP Hewlett Packard 436A Power Meter Watt dBm dB REF w/ Case & Accessories
Benchtop RF power meter for measuring power in watts, milliwatts, and dBm. Single-channel Type-N sensor input with IEEE-488 GPIB interface for remote operation.
Specifications & What's Included
- Model: 436A
- Display modes: Watt, mW, µW, nW, dBm, dB REF, REMOTE
- Power reference: 1.00 mW at 50 MHz (built-in)
- Compatible sensors: HP 8481A, 8482A, 8483A, 8485A
- Rear connectors: Type-N sensor input, BNC output, IEEE-488 GPIB
- AC line powered
- Includes: hard carry case with two keys, coax sensor cables
Applications
Used in RF testing, telecommunications equipment setup, and power measurement in lab environments.
Condition: Used
This HP 436A Power Meter has been visually inspected and shows normal wear consistent with lab use. The unit comes with its original hard carry case (with two keys), coax sensor cables, and accessories as shown in the photos. It has not been bench-tested at our facility. Please view our photo set and contact us with any questions.
This HP 436A Power Meter has been visually inspected and shows normal wear consistent with lab use. The unit comes with its original hard carry case (with two keys), coax sensor cables, and accessories as shown in the photos. It has not been bench-tested at our facility. Please view our photo set and contact us with any questions.
Warranty Information
We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose
Additional Information
Brand: |
HP (Hewlett-Packard) |
Model: |
436A |
MPN: |
436A |
SKU: |
42585 |
Condition: |
Used – Inspected |
Seller Notes: |
Includes hard carry case, two keys, and sensor/coax cables |
Form Factor: |
Benchtop |
Country of Manufacture: |
United States |
Measurement Type: |
RF Power |
Display Modes: |
Watt, mW, µW, nW, dBm, dB REF, REMOTE |
Power Reference: |
1.00 mW at 50 MHz (built-in) |
Sensor Input: |
Single channel, Type-N connector |
Rear Connectors: |
BNC output, IEEE-488 GPIB interface |
Controls: |
Mode, Range Hold, Sensor Zero, Cal Factor %, Power Ref, Line |
Compatible With: |
HP 8481A, 8482A, 8483A, 8485A power sensors |
Interface: |
IEEE-488 GPIB (rear panel) |
Power Requirements: |
AC line powered (rear panel line switch) |
What's Included: |
436A unit, hard carry case, two keys, coax cables |
Condition Notes: |
This HP 436A Power Meter has been visually inspected and shows normal wear consistent with lab use. The unit comes with its original hard carry case (with two keys), coax sensor cables, and accessories as shown in the photos. |