Description
Horiba TD-950 US pH/ORP Meter Panel Mount Benchtop Analyzer AC 90-132V 1994
The Horiba TD-950 US is a benchtop pH and ORP (Oxidation Reduction Potential) analyzer designed for laboratory and industrial water quality measurement. This panel-mount unit measures pH levels and oxidation reduction potential in liquid samples.
Specifications & What's Included
- Model: TD-950 US | Manufacturer: Horiba, Japan
- Measurement: pH and ORP (Oxidation Reduction Potential)
- Display: LCD readout
- Calibration modes: 7-point, 4-point, 10-point, and star calibration
- Controls: MODE, Up, Down, ENT buttons on front panel
- Power: AC 90–132V
- Outputs: Terminal block rear connections (G(M) / R / T / T / E)
- Unit only; no probe or accessories included
Applications
The TD-950 was commonly used in water treatment facilities, laboratories, and process control systems to monitor pH and ORP values. These analyzers were standard instrumentation for wastewater treatment, pharmaceutical manufacturing, and chemical processing where continuous water quality monitoring was required. The multiple calibration modes allow operation with various probe and sensor configurations.
This Horiba TD-950 US pH/ORP Meter has been inspected and appears to be in good condition. The front panel LCD and keypad show some light surface scratching visible on the display cover, as seen in the photos. The housing is intact with no cracks or major damage. The rear terminal block connections appear complete. The unit was manufactured in Japan in March 1994. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
Horiba |
Model: |
TD-950 US |
MPN: |
TD-950 US |
Type: |
pH/ORP Meter |
SKU: |
30910 |
Measurement Type: |
pH and ORP (Oxidation Reduction Potential) |
Display Type: |
LCD |
Form Factor: |
Panel Mount |
Power Requirements: |
AC 90-132V |
Country/Region of Manufacture: |
Japan |
Manufacture Date: |
March 1994 |
Calibration Points: |
7-point, 4-point, 10-point, and star calibration modes |
Front Panel Controls: |
MODE, Up, Down, ENT (Enter) buttons |
Output: |
Terminal block rear output (G(M) / R / T / T / E terminals) |
Condition: |
Used – Inspected |
Seller Notes: |
Unit only; no probe or accessories observed in photos. |
Condition Notes: |
Horiba TD-950 US pH/ORP Meter. Inspected and in good condition. Light surface scratching on display cover. Housing intact, terminal block complete. Manufactured Japan 1994. Please contact us with any questions. |
