Description
Hipro HP-150PP3 150W AT Power Supply 115V/230V +5V/16A +12V/6A Molex UL CSA
The Hipro HP-150PP3 is a 150-watt AT-form-factor power supply designed for IBM PC/XT/AT-class desktop computers and compatible systems. It delivers regulated DC power across four voltage rails via a Molex peripheral and floppy drive connector harness, and accepts both 115V and 230V AC input, making it suitable for use in North American and international systems.
Specifications & What's Included
- Model: HP-150PP3 (HP-150 PP 3)
- Form Factor: AT
- Max Output Power: 150W
- AC Input: 115V~ / 5A or 230V~ / 3A, 50/60Hz
- DC Output: +5V / 16A
- DC Output: +12V / 6A
- DC Output: -5V / 0.5A
- DC Output: -12V / 0.5A
- Fuse Rating: 3A / 250V
- AC Input Connector: IEC C14 (rear panel)
- AC Output Connector: IEC C13 (rear panel, passthrough)
- Power Switch: Red rocker switch on rear panel
- Output Harness: 2x 4-pin Molex peripheral connectors, 2x 4-pin Berg floppy drive connectors
- Certifications: UL Listed (E143709), CSA Certified (LR99969 Level 3)
Applications
AT-form-factor power supplies like the HP-150PP3 were the standard in IBM PC/XT/AT desktop computers and compatible clones from the mid-1980s through the mid-1990s, before the ATX standard took over around 1995. They powered the main system board, hard drives, floppy drives, and expansion cards through Molex peripheral connectors and a large AT power connector to the motherboard. Today, these supplies are sought by collectors and technicians maintaining vintage IBM PC/AT-era computers, early industrial PCs, and legacy rack-mount or embedded systems that still use AT-style power connectors. The 115V/230V dual-voltage input of the HP-150PP3 also made it common in international computing environments of that era.
This Hipro HP-150PP3 150W AT Power Supply has been bench-tested at our facility and is in good working condition. The chassis is in good used shape with minor surface scuffs typical of a pulled unit. The rating label is clean and fully legible. All output connectors — two Molex 4-pin peripheral and two Berg 4-pin floppy — are present and in good condition. The AC cord and rear IEC connectors are intact. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
Hipro |
Model: |
HP-150PP3 |
MPN: |
HP-150PP3 |
Type: |
AT Power Supply |
SKU: |
22160 |
Form Factor: |
AT |
Maximum Output Power: |
150W |
AC Input Voltage: |
115V~/5A or 230V~/3A |
Input Frequency: |
50/60Hz |
DC Output +5V: |
+5V / 16A |
DC Output +12V: |
+12V / 6A |
DC Output -5V: |
-5V / 0.5A |
DC Output -12V: |
-12V / 0.5A |
Fuse Rating: |
3A / 250V |
Output Connectors: |
2x Molex 4-pin Peripheral, 2x 4-pin Berg Floppy |
AC Input Connector: |
IEC C14 |
AC Output Connector: |
IEC C13 |
Power Switch: |
Red rocker switch (rear panel) |
Certifications: |
UL E143709, CSA LR99969 Level 3 |
Country/Region of Manufacture: |
Taiwan |
Seller Notes: |
Includes attached Molex and floppy drive power harness and AC cord |
Condition Notes: |
This Hipro HP-150PP3 150W AT Power Supply has been bench-tested at our facility and is in good working condition. Minor surface scuffs typical of a pulled unit. All output connectors intact. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |