HEDCO

HEDCO AVM-100 Audio Video Monitor Switcher Rackmount 1U 115/230V BNC RCA

(No reviews yet) Write a Review
SKU:
35302
MPN:
AVM-100
Condition:
Used
Availability:
Currently out of stock — contact us for availability.
Weight:
13.00 LBS
Shipping:
Calculated at Checkout
  • HEDCO AVM-100 Audio Video Monitor Switcher — front panel view showing 12 channel selector buttons, HEDCO logo, and right-side monitor controls
  • HEDCO AVM-100 — rear panel view showing dense array of BNC and RCA connectors, screw terminals, and power cable
  • HEDCO AVM-100 model label closeup — black label showing HEDCO trademark, Model AVM-100, and blank S/N field
  • HEDCO AVM-100 — angled front panel view showing channel selector buttons, monitor controls, and VIDEO/AUDIO status LEDs on right side
  • HEDCO AVM-100 — closeup of front panel channel selector buttons labeled B=1 through B=5 and beyond, with HEDCO AVM-100 nameplate
  • HEDCO AVM-100 — right front panel closeup showing VIDEO (G, R) and AUDIO (L, R) indicator LEDs, BAL and GAIN knobs, and headphone jack
  • HEDCO AVM-100 — rear panel module closeup showing MON. L/R RCA jacks, VIDEO OUTPUTS 1 and 2 BNC connectors, and L/G/R screw terminal strip labeled AVM 100
  • HEDCO AVM-100 — rear panel full-width view showing rows of BNC and RCA input connectors across multiple input positions
  • HEDCO AVM-100 — rear panel end section showing FUSE holder, 115/230 VAC power selector, 50/60 Hz marking, J1 D-sub 25-pin connector, and attached power cable
$53.00
Was: $100.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

HEDCO AVM-100 Audio Video Monitor Switcher Rackmount 1U 115/230V BNC RCA

The HEDCO AVM-100 is a 1U rackmount audio/video monitor switcher designed for broadcast, production, and post-production environments. It provides multi-channel input selection via front-panel pushbutton controls with separate VIDEO and AUDIO status indicators, and includes dedicated BAL (balance) and GAIN knobs plus a front-panel headphone jack for real-time monitoring.

Specifications & What's Included

  • Manufacturer: HEDCO
  • Model: AVM-100
  • Form factor: 1U rackmount
  • Power: 115/230 VAC, 50/60 Hz (rear-panel switchable)
  • Front panel: 12+ illuminated channel selector pushbuttons
  • Front panel controls: BAL (balance) knob, GAIN knob, headphone output jack
  • Front panel indicators: VIDEO status LEDs (G, R) and AUDIO status LEDs (L, R)
  • Video outputs: 2x BNC connectors (labeled VIDEO OUTPUT 1 and 2) on rear
  • Audio monitor outputs: L/R RCA (phono) jacks (MON.) on rear module
  • Audio connections: screw terminal strip (L, L, G, G, R, R) on rear
  • Rear expansion/control port: D-sub 25-pin connector (J1)
  • Rear inputs: dense array of BNC and RCA connectors across multiple input channels
  • Fuse: rear-panel fuse holder (fuse type not legible in photos)
  • Includes: attached power cable

Applications

The AVM-100 is the type of equipment used in broadcast control rooms, post-production suites, cable head-ends, and institutional AV installations where operators need to route and monitor multiple composite video and audio sources from a single rack-mounted unit. A switcher/monitor of this design allows an operator to select any of the connected sources for visual and audio confidence monitoring without interrupting the output feed — a standard requirement in multi-camera production, tape dubbing rooms, and master control facilities. HEDCO produced rackmount AV routing and monitoring equipment primarily for the broadcast and cable TV industries from the 1980s onward, and units like the AVM-100 remain in use in legacy broadcast and institutional AV systems that have not yet migrated to digital routing infrastructure.

Condition: Used
This HEDCO AVM-100 Audio Video Monitor Switcher has been inspected and appears to be in good used condition. The front panel shows light surface wear and minor scuffing consistent with rack use, and the selector buttons appear intact. The rear connector board shows typical aging on the PCB finish but all BNC and RCA connectors appear present and undamaged. The unit retains its attached power cable. It was pulled from a working environment where it was previously in use and has not been powered up or tested at our facility. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Hedco
Model:
AVM-100
MPN:
AVM-100
Type:
Audio/Video Monitor Switcher
SKU:
35302
Form Factor:
1U Rackmount
Power Requirements:
115/230 VAC, 50/60 Hz
Video Connector Type:
BNC
Audio Connector Type:
RCA (phono), screw terminal
Monitor Output:
Headphone jack, BAL and GAIN controls
Video Outputs:
2x BNC (labeled VIDEO OUTPUT 1 and 2)
Audio Monitor Output:
L/R RCA jacks (MON.) plus screw terminal
Number of Input Channels:
12+ (front panel selector buttons)
Front Panel Controls:
12 channel selector buttons, BAL, GAIN knobs
Status Indicators:
VIDEO, AUDIO (G, R, L, R) LEDs on front
Expansion/Control Port:
D-sub 25-pin connector (rear, J1)
Fuse:
Fuse holder on rear panel (switchable 115/230V)
Seller Notes:
Unit only — no additional cables or accessories included beyond attached power cable.
Condition Notes:
This HEDCO AVM-100 Audio Video Monitor Switcher is in good used condition with light surface wear. Pulled from a working environment; not powered or tested at our facility. All connectors appear intact. Please contact us with any questions.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose