Description
Heath Zenith SM-2410 Digital Frequency Counter 10 Hz-225 MHz LED Benchtop BNC
The Heath Zenith SM-2410 is a benchtop digital frequency counter covering 10 Hz to 225 MHz across two switched ranges. It displays measured frequency on a 7-digit red LED readout in MHz, with selectable gate times of 0.1 second and 1 second for accuracy versus update-speed tradeoffs. Input is via a front-panel BNC connector.
Specifications & What's Included
- Model: Heath Zenith SM-2410
- Type: Digital frequency counter
- Frequency Range 1: 10 Hz to 50 MHz
- Frequency Range 2: 20 MHz to 225 MHz
- Range selection: front-panel toggle switch
- Display: 7-digit red LED, MHz readout
- Gate time: 0.1 sec / 1 sec (switchable)
- Input connector: BNC (front panel)
- Power: 120/240 VAC, 50/60 Hz, 25 Watts
- Standard: EIA-416
- Oscillator adjustment: rear-panel OSC ADJ trimmer
- Form factor: benchtop, dark gray enclosure
- Includes: unit with attached power cord
Applications
Frequency counters like the SM-2410 are standard bench instruments used to measure the frequency of periodic electrical signals — audio tones, RF carriers, clock signals, oscillator outputs, and more. The SM-2410 was produced by Heath Zenith (the commercial arm of the well-known Heathkit kit-electronics brand) and dates from the late 1970s to early 1980s, an era when seven-segment LED displays and discrete TTL logic were the norm for benchtop test gear. Its dual frequency range — covering audio frequencies up from 10 Hz through VHF signals up to 225 MHz — made it useful across a wide range of lab, amateur radio, and service-bench applications. Today these instruments remain practical for hobbyists, vintage electronics restorers, ham radio operators, and anyone needing a straightforward frequency measurement tool without the cost of modern digital instruments.
This Heath Zenith SM-2410 Digital Frequency Counter was pulled from a working environment where it was previously in use. The front panel shows light cosmetic wear consistent with bench use, and the unit appears to be in good overall cosmetic condition. The attached power cord is present, and the BNC input connector appears intact. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
Heath Zenith |
Model: |
SM-2410 |
MPN: |
SM-2410 |
Type: |
Digital Frequency Counter |
SKU: |
45807 |
Frequency Range: |
10 Hz to 225 MHz (two switched ranges) |
Range 1: |
10 Hz to 50 MHz |
Range 2: |
20 MHz to 225 MHz |
Display: |
7-digit red LED, MHz readout |
Gate Time: |
0.1 sec / 1 sec (switchable) |
Input Connector: |
BNC |
Power Requirements: |
120/240 VAC, 50/60 Hz, 25 Watts |
Standard: |
EIA-416 |
Form Factor: |
Benchtop |
Oscillator Adjustment: |
Rear-panel OSC ADJ trimmer |
Seller Notes: |
Unit only with attached power cord — no additional accessories included. |
Country/Region of Manufacture: |
United States |
Condition Notes: |
This Heath Zenith SM-2410 Digital Frequency Counter was pulled from a working environment. Cosmetic wear is light and consistent with bench use. BNC input and power cord present. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |