Description
HBS Equipment Corp TDA1010CVYH DC Power Supply 10V 10A 115VAC 1-Phase 60Hz
The HBS Equipment Corp TDA1010CVYH is a benchtop DC power supply with independently adjustable voltage and current outputs. It features dual front-panel LED digital meters for real-time DC voltage and DC amperage readings, an electromechanical amp-minute counter for tracking cumulative current delivery, and rotary dial controls for both voltage and current. Built-in alarm and auto-shutdown switches provide basic overcurrent protection, and the output is accessible via front-panel positive and negative binding posts. The unit runs on standard single-phase 115VAC mains power.
Specifications & What's Included
- Model: TDA1010CVYH
- Manufacturer: HBS Equipment Corporation, 3000 Supply Ave, Los Angeles, CA 90040
- Input: 115V AC, 2A, Single Phase, 60 Hz
- Output: 10V DC, 10A DC
- Voltage Control: Front-panel rotary dial (0–100 graduated scale)
- Current Control: Front-panel rotary dial (0–100 graduated scale)
- Displays: Dual red LED digital meters — DC Volts and DC Amps
- Amp-Minute Counter: Electromechanical totalizer with front-panel fuse holders
- Output Terminals: Positive (+) and negative (–) binding posts on front panel
- Protection: Alarm On/Off toggle; Auto Shutdown On/Off toggle
- Fuse: Front-accessible, rated 250V
- Cooling: Three rear-mounted finned aluminum heat sinks
- Enclosure: Blue steel chassis with white front panel; benchtop form factor
- Power Cord: Attached at rear
Applications
Low-voltage, moderate-current DC power supplies like the TDA1010CVYH are commonly used in electroplating and anodizing operations, where precise control over both voltage and current — and tracking of amp-minute delivery — is essential for consistent plating thickness and quality. The built-in amp-minute counter is a hallmark feature for plating use, allowing operators to calculate coating weight and thickness. Beyond plating, this type of supply is also well-suited to laboratory bench work, battery charging, electrolysis experiments, and general-purpose DC testing applications requiring a stable, adjustable output in the 0–10V / 0–10A range. HBS Equipment Corporation was a Los Angeles-based manufacturer that produced purpose-built power supplies and controls for industrial electrochemical processes; units like this one date from the latter decades of the twentieth century and are still actively sought for plating shops that operate legacy processes.
This HBS Equipment Corp TDA1010CVYH DC Power Supply is in good used condition. It has not been powered up or tested at our facility, but it was pulled from a working environment where it was previously in service. The blue steel enclosure and white front panel show light surface wear consistent with regular lab use. All front-panel controls — including the voltage and current control knobs, toggle switches, and output binding posts — are present and appear intact. Please review our full photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
HBS Equipment Corporation |
Model: |
TDA1010CVYH |
MPN: |
TDA1010CVYH |
Type: |
DC Power Supply |
SKU: |
45041 |
Input Voltage: |
115V AC |
Input Current: |
2A AC |
Phase: |
Single Phase |
Input Frequency: |
60 Hz |
Output Voltage: |
10V DC |
Output Current: |
10A DC |
Output Type: |
DC |
Voltage Control: |
Variable (front-panel rotary dial, 0–100 scale) |
Current Control: |
Variable (front-panel rotary dial, 0–100 scale) |
Display: |
Dual LED digital meters — DC Volts and DC Amps |
Meter: |
Amp-Minute counter (electromechanical totalizer) |
Protection: |
Alarm On/Off switch; Auto Shutdown On/Off switch |
Fuse: |
250V fuse (front-accessible) |
Output Terminals: |
Positive (+) and negative (–) binding posts on front panel |
Form Factor: |
Benchtop |
Enclosure Color: |
Blue steel chassis with white front panel |
Cooling: |
Three rear-mounted finned heat sinks |
Country/Region of Manufacture: |
United States |
Manufacturer Address: |
3000 Supply Ave, Los Angeles, CA 90040 |
Seller Notes: |
Unit only — no accessories included. |
Condition Notes: |
This HBS Equipment Corp TDA1010CVYH DC Power Supply is in good used condition. Not powered or tested at our facility; pulled from a working environment. Enclosure shows light surface wear. All controls and binding posts appear intact. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |
