Hammond Power Solutions

Hammond Power Solutions HPS PH500MQMJ 500VA Industrial Control Transformer 120V

(No reviews yet) Write a Review
SKU:
45007
Condition:
Used
Availability:
Currently out of stock — contact us for availability.
Weight:
13.00 LBS
Shipping:
Calculated at Checkout
  • Hammond Power Solutions HPS PH500MQMJ 500VA industrial control transformer – front-left 3/4 view showing fuse holders, mounting feet, and multi-color wire leads with 3-prong power cord
  • Hammond HPS PH500MQMJ 500VA control transformer – front-right 3/4 view with fuse holders on top and wire leads spread out showing green, red, black, and white conductors
  • Hammond HPS PH500MQMJ rating label close-up showing 500 VA, 50/60 Hz, 80°C Rise, multi-tap HV and LV wiring diagram, UL Listed, CE mark, and Cat. No. PH500MQMJ
  • Hammond HPS PH500MQMJ – top-down close-up of secondary terminal block with blade-type fuse holders and red and white wire leads
  • Hammond HPS PH500MQMJ – side/bottom view of primary terminal block showing fuse holder, green and red leads, and rating label visible on transformer body
  • Hammond HPS PH500MQMJ 500VA industrial control transformer – straight-on front view showing both sets of wire leads, mounting feet, and fuse holders on top
$75.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

Hammond Power Solutions HPS PH500MQMJ 500VA Industrial Control Transformer 120V

The Hammond Power Solutions HPS PH500MQMJ is a 500 VA single-phase industrial control transformer rated for 600V class machine tool applications. It features a multi-tap primary and secondary winding configuration, allowing flexible voltage matching across a range of common industrial supply voltages. The unit is UL Listed and CE marked, built to a heavy-steel core construction with bolted or welded mounting feet for secure panel or enclosure installation.

Specifications & What's Included

  • Manufacturer: Hammond Power Solutions (HPS)
  • Catalog / Part Number: PH500MQMJ
  • Type: Industrial Control Transformer
  • Power Rating: 500 VA
  • Voltage Class: 600V Class, Machine Tool Rated
  • Primary (HV) Voltage — multi-tap: 220V / 230V / 240V or 440V / 460V / 480V
  • Secondary (LV) Voltage — multi-tap: 110V / 115V / 120V or 220V / 230V / 240V
  • Frequency: 50/60 Hz
  • Temperature Rise: 80°C
  • Phase: Single Phase
  • Mounting: Heavy-steel mounting feet, welded or bolted to core
  • Certifications: UL Listed (File E50394, Guide 252L), CE
  • Country of Manufacture: China
  • Includes: Transformer with attached multi-wire leads and 3-prong power cord

Applications

Industrial control transformers like the HPS PH500MQMJ are used to step down higher-voltage machine power lines (240V or 480V) to lower control-circuit voltages (typically 120V) that operate relays, contactors, pilot lights, PLCs, and other control devices on machine tools, automated equipment, and factory floor machinery. The 600V class, machine tool rating means this transformer meets the stricter insulation and short-circuit withstand requirements called out in standards for industrial machinery — the kind of environment where fault currents and electrical noise are higher than in general-purpose applications. Multi-tap primaries allow a single transformer to be field-configured for 208V, 240V, 460V, or 480V supply systems without rewinding. Hammond Power Solutions (HPS) is a well-established North American transformer manufacturer whose control transformers are widely installed in CNC machine tools, injection molding machines, conveyor systems, and general industrial automation panels.

Condition: Used
This Hammond Power Solutions HPS PH500MQMJ 500VA Industrial Control Transformer has been pulled from a working environment where it was previously in use. The unit has been visually inspected and is in good used condition. The transformer body, mounting feet, fuse holders, and terminal blocks appear intact with no obvious damage. The attached wire leads and 3-prong power cord are present as shown. Some light surface wear typical of a used industrial component may be visible — please review our photos for a full picture of cosmetic condition. Please contact us with any questions before purchasing.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Hammond Power Solutions
Model:
PH500MQMJ
MPN:
PH500MQMJ
Type:
Industrial Control Transformer
SKU:
45007
Power Rating:
500 VA
Primary Voltage:
220/230/240V or 440/460/480V (multi-tap)
Secondary Voltage:
110/115/120V or 220/230/240V (multi-tap)
Frequency:
50/60 Hz
Temperature Rise:
80°C Rise
Voltage Class:
600V Class
Phase:
Single Phase
Mounting:
Mounting Feet (Heavy Steel, Welded or Bolted to Core)
Certifications:
UL Listed (252L, E50394), CE
Application:
Machine Tool Rated, Industrial Control
Country/Region of Manufacture:
China
Form Factor:
Open / Panel Mount with Mounting Feet
Seller Notes:
Includes attached multi-wire leads and 3-prong power cord. No additional accessories.
Condition Notes:
This Hammond HPS PH500MQMJ 500VA Industrial Control Transformer was pulled from a working environment and has been visually inspected. Good used condition. Wire leads and power cord present. Typical light surface wear. Please review photos.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose