Description
George Fischer Signet 3-9030.111 pH Controller in Enclosure w/ 2 Outlets 110V
Industrial pH controller manufactured by George Fischer Signet for process monitoring and control applications. Unit is mounted in a wall-mount enclosure with integrated AC power distribution.
Specifications & What's Included
- Model: 3-9030.111 (George Fischer Signet)
- Power: 110V AC input
- 4 relay outputs (RLY1, RLY2, RLY3, RLY4)
- pH sensor input (analog)
- LCD display with front panel controls (MOD, RELAY, OUTPUT, arrow keys, TRIM)
- 2x 110V AC switched outlets
- Enclosure: Allied Moulded AM-1086 (CSA Type 1,2,3,4,4X,12,13)
- Terminal connections: AC IN, DC IN, relay outputs, analog input, serial, ISO
Applications
pH controllers are used in water treatment, chemical processing, wastewater management, and laboratory systems to monitor and regulate pH levels. This Signet model operates with compatible GF Signet pH electrodes and sensors. The relay outputs enable automated control of pumps, solenoids, and alarms based on pH thresholds. The enclosed design provides protection for industrial environments.
Condition: Used
This George Fischer Signet 3-9030.111 pH Controller has been inspected and appears to be in working condition. The unit is mounted inside an Allied Moulded nonmetallic enclosure (AM-1086) with internal wiring intact and two 110V AC outlets installed. The enclosure body shows surface scuffing and grime consistent with industrial use; the controller front panel shows some wear around the keypad area. All terminal connections are present and the wiring appears complete. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
This George Fischer Signet 3-9030.111 pH Controller has been inspected and appears to be in working condition. The unit is mounted inside an Allied Moulded nonmetallic enclosure (AM-1086) with internal wiring intact and two 110V AC outlets installed. The enclosure body shows surface scuffing and grime consistent with industrial use; the controller front panel shows some wear around the keypad area. All terminal connections are present and the wiring appears complete. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
Warranty Information
We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose
Additional Information
Brand: |
George Fischer (GF Signet) |
Model: |
3-9030.111 |
MPN: |
3-9030.111 |
Type: |
pH Controller |
SKU: |
46213 |
Power Requirements: |
110V AC |
Number of Relay Outputs: |
4 (RLY1, RLY2, RLY3, RLY4) |
Input Type: |
pH sensor input (analog) |
Enclosure Brand: |
Allied Moulded Products |
Enclosure Model: |
AM-1086 |
Enclosure Rating: |
CSA ENC 4,5 — Type 1,2,3,4,4X,12,13 |
Enclosure Certification: |
CSA LR89590 |
Enclosure Country of Manufacture: |
USA (Bryan, Ohio) |
Outlets Included: |
2x 110V AC switched outlets |
Display: |
LCD display |
Front Panel Controls: |
MOD, RELAY, OUTPUT, arrow keys, TRIM |
Terminal Connections: |
AC IN, DC IN, RLY1, RLY2, ANLI, serial, ISO |
Application: |
Industrial process pH monitoring and control |
Form Factor: |
Panel-mount controller in wall-mount enclosure |
Compatible With: |
GF Signet pH electrodes and sensors |
Condition: |
Used – Inspected, appears in working condition |
Seller Notes: |
Includes controller, wired enclosure, and 2 AC outlets |
Condition Notes: |
George Fischer Signet 3-9030.111 pH Controller inspected and appears in working condition. Mounted in Allied Moulded AM-1086 enclosure with 2 AC outlets. Enclosure shows surface wear from industrial use. Wiring intact. |