Vacuum Oven 7.75x7.75x11.5 in Chamber 110V Benchtop Lab Drying Degassing

Vacuum Oven 7.75x7.75x11.5 in Chamber 110V Benchtop Lab Drying Degassing

This is a compact benchtop vacuum oven with a 7.75 W x 7.75 T x 11.5 D inch interior chamber, designed for laboratory drying, degassing, and solvent removal applications. The unit features a hinged glass-window door with an orange silicone gasket and latch hardware for maintaining a vacuum seal, a top-mounted analog pressure/vacuum gauge, and two vacuum port fittings on the top of the enclosure. Front-panel controls include a rocker power switch and a rotary temperature control knob. The unit is wired for 110V AC operation.

Specifications & What's Included

• Type: Benchtop vacuum oven
• Interior chamber dimensions: 7.75 in (W) x 7.75 in (H) x 11.5 in (D)
• Exterior footprint: approximately 13 x 16 in
• Voltage: 110V AC
• Door: Hinged glass-window door with orange silicone gasket and latch hardware
• Pressure/vacuum gauge: Analog dial gauge mounted on top of unit
• Vacuum port fittings: Two fittings on top of enclosure
• Front-panel controls: Rocker power switch and rotary temperature knob
• Exterior: Blue steel housing
• Included: Oven unit only — no manual, cables, or peripherals

Applications

Benchtop vacuum ovens are standard equipment in research labs, university chemistry and materials science departments, electronics manufacturing, and quality control environments. They are used to dry heat-sensitive samples without oxidation, remove residual solvents from coatings and polymers, degas adhesives, epoxies, and potting compounds, and cure materials under controlled low-pressure conditions. The ability to pull a vacuum on the chamber allows moisture and trapped gases to be driven off at lower temperatures than would be needed in a conventional atmospheric oven — making them well suited for drying porous materials, powders, and electronic assemblies. Units of this compact size are common on individual lab benches where space is limited and batch sizes are small.