Description
GE 9710ES Centrifugal Blower Assembly 1/2 HP 1075 RPM 115V 60Hz Spring Mount
The GE 9710ES is a single-phase centrifugal blower assembly combining a squirrel-cage blower wheel with an integrated GE electric motor on a spring suspension base. It runs at 1075 RPM on 115V/60Hz single-phase power and is rated at 1/2 HP. The spring suspension mounting isolates vibration for quieter operation, and the flexible sealing cuff allows the assembly to connect to ductwork with a secure, low-noise seal. This unit has been tested at our facility and is in good working condition.
Specifications & What's Included
- Model: GE 9710ES
- Motor Power: 1/2 HP
- Speed: 1075 RPM
- Voltage: 115V
- Frequency: 60/50 Hz
- Phase: Single Phase (PH1)
- Capacitor: 10.00 µF / 370V
- Thermal Protection: Thermally Protected
- Wheel Type: Squirrel cage (centrifugal)
- Mounting: Spring suspension base
- Sealing: Flexible sealing cuff for duct connection
- CPN Stock No.: 3987
- Lead wires: Multi-conductor color-coded leads (green, yellow, orange, blue visible)
- Includes: Blower assembly with motor and spring-mounted base
Applications
Centrifugal blower assemblies of this type are widely used in HVAC air handling units, furnaces, rooftop package units, and commercial ventilation systems where a compact motor-blower combination is needed within a cabinet or air handler. The squirrel-cage wheel design moves large volumes of air against moderate static pressure — the standard configuration for forced-air heating and cooling systems. Spring suspension mounting is common in applications where vibration isolation matters, such as residential and light-commercial air handlers, fan coil units, and equipment rooms where noise control is a priority. The 1075 RPM speed class is typical of multi-speed or single-speed PSC (permanent split capacitor) motors used in HVAC equipment manufactured from the 1980s through the 2000s, and this motor type remains in active service in replacement and retrofit applications today.
This GE 9710ES centrifugal blower assembly has been tested at our facility and is in good working condition. The squirrel-cage wheel spins freely, and the motor runs. The housing shows typical wear for used equipment — the sheet metal base has some paint loss and surface scuffing visible on the rear bracket, and the intake surround shows dust accumulation from prior service. The spring suspension base and flexible sealing cuff are intact. Please review our photos and contact us with any questions.
Warranty Information
Additional Information
Brand: |
GE (General Electric) |
Model: |
9710ES |
MPN: |
9710ES |
Type: |
Centrifugal Blower Assembly |
SKU: |
19526 |
Horsepower: |
1/2 HP |
RPM: |
1075 RPM |
Voltage: |
115V |
Frequency: |
60/50 Hz |
Phase: |
Single Phase |
Capacitor: |
10.00 µF / 370V |
Thermal Protection: |
Thermally Protected |
Wheel Type: |
Squirrel Cage / Centrifugal |
Mounting Type: |
Spring Suspension |
Sealing: |
Flexible Sealing Cuff |
CPN Stock No.: |
3987 |
Rotation: |
ROT (see label) |
Seller Notes: |
Blower assembly only — no additional accessories or hardware included. |
Country/Region of Manufacture: |
United States |
Form Factor: |
Spring-Mounted Blower Assembly |
Condition Notes: |
This GE 9710ES centrifugal blower assembly has been tested and is in good working condition. Shows typical wear — paint loss on rear bracket, dust on intake surround. Spring mount and sealing cuff intact. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |