Description
EG&G Rotron CX33A33C Centrimax Centrifugal Blower 027556 208-230V 3-Phase 1.3A
The EG&G Rotron CX33A33C is a Centrimax series centrifugal blower manufactured by Rotron Inc. of Woodstock, NY — a division of EG&G well known for its high-performance industrial blowers. Centrifugal blowers of this type use a rotating impeller wheel to accelerate air outward through a scroll-shaped housing, converting kinetic energy into pressure and flow. This unit runs on three-phase AC power and is built with a durable thermoplastic scroll housing around a compact, directly-driven impeller.
Specifications & What's Included
- Manufacturer: EG&G Rotron (Rotron Inc., Woodstock, NY, USA)
- Product Line: Centrimax
- Model: CX33A33C
- Part Number: 027556
- Input Voltage: 200–230V AC
- Phase: 3-Phase
- Current: 1.3A
- Frequency: 50/60 Hz
- Wiring diagram located under motor cover (per rating label)
- Inlet: Round duct inlet (front-facing)
- Outlet: Square flanged discharge outlet
- Housing: Thermoplastic/polymer composite scroll volute
- Performance curve chart label affixed to housing side
- Blower unit only — no mounting hardware or duct adapters included
Applications
The Rotron Centrimax series centrifugal blowers are used across a wide range of industrial, laboratory, and OEM applications that require reliable, compact air-moving performance. Common uses include electronics cooling in cabinets and enclosures, ventilation in industrial equipment and control panels, process cooling in semiconductor and clean-room tools, and pneumatic conveying or pressurization in laboratory systems. The three-phase motor configuration makes this unit well suited for continuous-duty industrial environments where single-phase power is not available or preferred. EG&G Rotron blowers were widely specified by OEM equipment manufacturers in military, aerospace, laboratory, and industrial electronics applications from the 1970s through the 2000s, and replacement units remain in demand for legacy system maintenance and new installations alike.
This EG&G Rotron CX33A33C Centrimax Centrifugal Blower (P/N 027556) is in used condition, pulled from a working environment where it was previously in service. The unit has been visually inspected and photographed. The scroll housing and impeller show normal wear consistent with industrial use — no cracks or obvious damage are visible in the photos. The motor back plate and electrical components appear intact. Please review our full photo set for a detailed look at the unit's current condition, and contact us with any questions.
Warranty Information
Additional Information
Brand: |
EG&G Rotron |
Model: |
CX33A33C |
MPN: |
027556 |
Type: |
Centrifugal Blower |
SKU: |
50431 |
Product Line: |
Centrimax |
Input Voltage: |
200-230V AC |
Current Rating: |
1.3A |
Phase: |
3-Phase |
Frequency: |
50/60 Hz |
Inlet Type: |
Round duct inlet |
Outlet Type: |
Square flanged outlet |
Housing Material: |
Thermoplastic / polymer composite |
Country/Region of Manufacture: |
United States |
Manufacturer Location: |
Rotron Inc., Woodstock, NY, USA |
Form Factor: |
Scroll/volute centrifugal blower |
Power Requirements: |
200-230V AC, 3-Phase, 1.3A, 50/60Hz |
Seller Notes: |
Blower unit only — no mounting hardware or duct fittings included. |
Condition Notes: |
This EG&G Rotron CX33A33C Centrimax Centrifugal Blower (P/N 027556) has not been powered or tested at our facility but was pulled from a working environment. Visually inspected; housing and impeller show normal industrial wear. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |