Description
EG&G Rotron 027556 Centrimax 208/230V 1.3A 3-Phase Centrifugal Blower CX33A33C
The EG&G Rotron CX33A33C is a Centrimax series centrifugal blower — a motorized impeller assembly designed to move high volumes of air in industrial, OEM, and electronics cooling applications. This unit has been tested: it powers on and the fan runs with strong airflow. Note that the fan housing (volute shroud) is not included — this is the bare blower assembly only.
Specifications & What's Included
- Manufacturer: EG&G Rotron (Rotron Inc., Woodstock, NY USA)
- Product Line: Centrimax
- Model: CX33A33C
- Part Number: 027556
- Voltage: 200–230V AC
- Current: 1.3A
- Phase: 3-Phase
- Frequency: 50/60 Hz
- Thermally protected (label confirmed on unit)
- Wiring diagram located under cover per rating label
- Lead wires with multi-pin connector
- Fan housing / volute shroud: NOT included — blower assembly only
Applications
EG&G Rotron Centrimax blowers are compact, high-performance centrifugal fans widely used in OEM electronics cooling, industrial control cabinets, telecom and datacom equipment, medical devices, and military/aerospace systems. The Centrimax series is known for its backward-curved aluminum impeller design, which delivers high static pressure and airflow efficiency in a relatively small package. These blowers are commonly integrated into equipment enclosures where a separate mounting frame or volute is part of the host chassis — which is why they are sometimes sold and replaced as bare assemblies without the housing. EG&G Rotron (later acquired and absorbed into Ametek) produced this line from the 1980s through the 2000s, and Centrimax blowers remain in active service in legacy industrial and telecom equipment.
This EG&G Rotron CX33A33C Centrimax 3-phase centrifugal blower has been tested and powers on — the fan runs and blows strong. Note that this unit does not include a fan housing (volute shroud); it is the blower assembly only. The housing shows normal wear consistent with industrial use. Please review all photos carefully and contact us with any questions.
Warranty Information
Additional Information
Brand: |
EG&G Rotron |
Model: |
CX33A33C |
MPN: |
027556 |
Type: |
Centrifugal Blower |
Product Line: |
Centrimax |
SKU: |
51601 |
Voltage: |
200-230V AC |
Current Rating: |
1.3A |
Phase: |
3-Phase |
Frequency: |
50/60 Hz |
Power Requirements: |
200-230V AC, 3-Phase, 1.3A, 50/60Hz |
Thermally Protected: |
Yes |
Country/Region of Manufacture: |
United States |
Fan Housing Included: |
No — blower assembly only, no volute/fan housing |
Seller Notes: |
Blower assembly only — no fan housing included |
Compatible With: |
Industrial cooling, electronics enclosures, OEM equipment |
Condition Notes: |
This EG&G Rotron CX33A33C Centrimax blower powers on and blows strong — tested and working. No fan housing included; blower assembly only. Normal industrial wear. Please view our photos and contact us with any questions. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |