Edwards

Edwards E2M12 Two Stage Rotary Vane Vacuum Pump GE 0.75HP 115/230V Foreline Trap

(No reviews yet) Write a Review
SKU:
43516
Condition:
Used
Availability:
Currently out of stock — contact us for availability.
Weight:
71.00 LBS
Shipping:
Calculated at Checkout
  • Edwards E2M12 two-stage rotary vane vacuum pump – right-side three-quarter view showing GE motor, foreline trap, and red Edwards badge
  • Edwards E2M12 vacuum pump – left-side three-quarter view showing GE motor, oil mist filter, foreline trap, and braided hose
  • Edwards foreline trap close-up – top label reading 'Edwards Foreline Trap, Made in Britain by Edwards High Vacuum (Part of B.O.C. Ltd.), Crawley England'
  • General Electric motor nameplate – Model 5KC47SG1560T, 3/4 HP, 115/230V, 1725/1425 RPM, 12.0/6.0A, FR56CZ, NEMA design
  • GE motor end cap close-up – showing GE logo, capacitor cover with visible surface rust, and motor shaft terminal
  • Edwards foreline trap close-up – showing cylindrical body with side port opening and top cap with wing-nut, heavy external surface oxidation
  • Edwards E2M12 pump body label – reading 'Edwards High Vacuum Pump, Model E2N-12, Made in England by Edwards High Vacuum (Part of BOC Ltd.), Crawley, Sussex, England'
  • Edwards E2M12 vacuum pump – rear three-quarter view showing oil sight glass, oil fill port labeled 'Fomblin 16/6 Oil Only', and braided foreline hose
$800.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

Edwards E2M12 Two Stage Rotary Vane Vacuum Pump GE 0.75HP 115/230V Foreline Trap

The Edwards E2M12 is a two-stage rotary vane mechanical vacuum pump manufactured by Edwards High Vacuum (a division of BOC Ltd.), made in England. It is driven by a General Electric 5KC47SG1560T single-phase motor rated at 0.75 HP and is capable of operating on either 115V or 230V supply. An Edwards foreline trap is mounted inline on the pump's inlet side and is included with this unit.

Specifications & What's Included

  • Manufacturer: Edwards High Vacuum (Part of BOC Ltd.), Crawley, Sussex, England
  • Model: E2M12 (Two Stage)
  • Pump Type: Two-stage rotary vane mechanical vacuum pump
  • Motor Brand: General Electric (GE)
  • Motor Model: 5KC47SG1560T
  • Motor Power: 0.75 HP (3/4 HP)
  • Voltage: 115/230V
  • Phase: Single Phase (PH 1)
  • Frequency: 50/60 Hz
  • Current: 12.0A (115V) / 6.0A (230V)
  • Motor RPM: 1725 (60 Hz) / 1425 (50 Hz)
  • Motor Frame: FR56CZ
  • Service Factor: 1.25
  • Insulation Class: B
  • Ambient Temperature Rating: 40°C
  • Oil: Fomblin 16/6 oil (label visible on pump body)
  • Included: Edwards foreline trap (made in Britain by Edwards High Vacuum)
  • Braided foreline hose connecting trap to pump inlet
  • Power cord attached
  • Country of Manufacture: England

Applications

The Edwards E2M series rotary vane vacuum pumps are widely used as roughing pumps and backing pumps across laboratory, scientific, and industrial environments. The E2M12 is a common choice in research labs, semiconductor fabrication, thin-film deposition (PVD/CVD), freeze drying, leak detection systems, and analytical instrumentation such as mass spectrometers and gas chromatographs. Two-stage rotary vane pumps achieve lower ultimate vacuum levels than single-stage designs, making them well-suited for applications requiring deeper rough vacuum in the range of 10⁻³ to 10⁻⁴ mbar. The Edwards E2M series was a long-running product line from Edwards High Vacuum (later BOC Edwards, now part of Atlas Copco) and has been a standard workhorse pump in scientific and industrial settings since the mid-twentieth century. The foreline trap included with this unit helps prevent oil backstreaming from the pump into the vacuum system, which is particularly important in clean or analytical applications.

Condition: Used
This Edwards E2M12 two-stage rotary vane vacuum pump has been pulled from a working environment where it was previously in service. It has not been powered up or tested at our facility. The unit shows typical wear for used lab equipment: the GE motor housing has surface corrosion on the end cap and capacitor cover, and the Edwards foreline trap shows external oxidation and discoloration on its aluminum body. The pump body and red Edwards badge are intact. Please review all photos carefully, and contact us with any questions before purchasing.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Edwards
Model:
E2M12
MPN:
E2M12
Type:
Two-Stage Rotary Vane Vacuum Pump
SKU:
43516
Seller Notes:
Includes Edwards foreline trap. No manual or additional accessories.
Country/Region of Manufacture:
England
Pump Stages:
Two Stage (Dual Stage)
Motor Brand:
General Electric (GE)
Motor Model:
5KC47SG1560T
Motor Power:
0.75 HP (3/4 HP)
Voltage:
115/230V
Phase:
Single Phase (PH 1)
Frequency:
50/60 Hz
Current:
12.0/6.0 A
Motor RPM:
1725 / 1425 RPM
Motor Frame:
FR56CZ
Motor Service Factor:
1.25
Insulation Class:
Class B
Ambient Temperature Rating:
40°C
Accessories Included:
Edwards Foreline Trap
Compatible With:
Edwards E2M series pump systems, lab/industrial vacuum applications
Form Factor:
Benchtop
Condition Notes:
This Edwards E2M12 two-stage rotary vane vacuum pump was pulled from a working environment. Not powered or tested at our facility. Motor shows surface rust on end cap; foreline trap shows external oxidation.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose