null
Ecolab Inc.

Ecolab FI-EZB-15NV-ECO EZBlend Boost Foam Unit 2-Part Dispenser Foamit

(No reviews yet) Write a Review
SKU:
52848
MPN:
FI-EZB-15NV-ECO
Condition:
Used
Availability:
Usually ships within 1–2 business days.
Weight:
66.00 LBS
Shipping:
Calculated at Checkout
  • Ecolab FI-EZB-15NV-ECO EZBlend Boost Foam Unit – right side view showing dual tanks, blue hose, and large rear wheel on mobile cart
  • Ecolab EZBlend Boost Foam Unit – front view showing dual solution tank tops with blue caps and Ecolab labels, on wheeled cart
  • Ecolab Boost EZBlend Foam Unit – close-up of product label reading 'BOOST EZBlend Foam Unit, for use with Ecolab BOOST Products only'
  • Ecolab EZBlend Foam Unit – close-up of water inlet or hose fitting connector, showing minor rust/residue on fitting
  • Ecolab EZBlend Boost Foam Unit – top-down view of dual solution tanks with blue screw caps and chained lids open, Ecolab labels visible
  • Ecolab FI-EZB-15NV-ECO Foam Unit – left side view showing Viton pump enclosure panel labeled '2', green and blue hoses, and rear wheel
  • Ecolab EZBlend Foam Unit – close-up of rear wheel axle area showing blue and green hose connections with clamps and quick-connect fittings
  • Ecolab EZBlend Boost Foam Unit – close-up of dual tank fill caps with chains, Ecolab product labels on Solution 1 and Solution 2 tanks
  • Ecolab FI-EZB-15NV-ECO Foam Unit – rear view showing Viton pump enclosure panel marked '2' with hose connections and large rear wheels
  • Ecolab EZBlend Boost Foam Unit – right-rear three-quarter view showing pressure regulator panel, blue hose, and Ecolab label on tank side
  • Ecolab EZBlend Foam Unit – interior view of large round tank opening showing black rubber seal ring and blue/green hoses routed inside
  • Ecolab FI-EZB-15NV-ECO label close-up – showing MFG Model No. FI-EZB-15NV-ECO, Serial No. B287460, Model No. 94062145, SO No. 131181
  • Ecolab EZBlend Foam Unit – interior panel open showing pressure regulator with gauge, blue hose connections, and mounting bracket
  • Ecolab EZBlend Foam Unit – close-up of pressure regulator assembly with gauge, caution label, blue hose connections, and filter housing
  • Ecolab EZBlend Foam Unit – close-up of Viton pump enclosure showing operation instructions label and 'For Use with Ecolab Boost Products Only' warning
$850.00
Was: $1,700.00
Current Stock: 4

Sold Out

Description

Ecolab FI-EZB-15NV-ECO EZBlend Boost Foam Unit 2-Part Dispenser Foamit

This is a mobile 2-part chemical foam dispenser system from Ecolab's Boost EZBlend product line. The unit combines two separate solution tanks with a Viton pump and pressure regulator to mix and dispense foam concentrate for cleaning and disinfection applications.

Specifications & What's Included

  • Model: FI-EZB-15NV-ECO (MPN: FI-EZB-15NV-ECO)
  • Dual color-coded solution tanks (Solution 1 and Solution 2)
  • Viton pump and pressure regulator
  • Mobile cart with 2 large rear wheels and 2 front casters
  • Blue and green hose assembly included
  • Manufactured in the United States

Applications

This foam dispenser type is used for surface disinfection, drain foaming, and general environmental cleaning in commercial and industrial settings. The 2-part mixing system allows for on-site preparation of foam solutions compatible with the Ecolab Boost product line. Units of this type are commonly deployed in food service facilities, healthcare environments, and manufacturing operations requiring sanitizing foam applications.

Condition: Used
This Ecolab FI-EZB-15NV-ECO EZBlend Boost Foam Unit has been inspected and appears to be in good used condition. It was pulled from a working environment where it was previously in active use. The white plastic tank body is intact with no cracks observed; the dual solution tanks, blue and green hose assemblies, Viton pump enclosure, and pressure regulator are all present as shown. Some surface soiling and minor staining is visible on the tank exterior and hose fittings consistent with normal chemical dispensing use. A fitting shows minor mineral residue near the inlet. Overall the unit is complete and presents well for its use history. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Ecolab
Model:
FI-EZB-15NV-ECO
MPN:
FI-EZB-15NV-ECO
Secondary Model:
94062145
SKU:
52848
Type:
2-Part Chemical Foam Dispenser / Foam Unit
Product Line:
Ecolab Boost EZBlend
Pump Type:
Viton Pump
Number of Solution Tanks:
2
Tank Configuration:
Dual tank, color-coded Solution 1 and Solution 2
Mobility:
Mobile cart with wheels (2 large rear, 2 front casters)
Includes:
Dual solution tanks, Viton pump, pressure regulator, hose assembly, blue/green hoses
Compatible With:
Ecolab Boost Products
Application:
Surface disinfection, drain foaming, environmental cleaning
Condition:
Used – Pulled from Working Environment
Seller Notes:
Unit includes hose assembly, pressure regulator, and dual-tank cart as photographed.
Country/Region of Manufacture:
United States
Condition Notes:
This Ecolab FI-EZB-15NV-ECO EZBlend Boost Foam Unit has been inspected and is in good used condition. Pulled from a working environment. Dual tanks, Viton pump, hoses, and pressure regulator present. Normal wear from use.
View AllClose