Description
DTK Turbo10-V01 XT Motherboard with RAM ISA 8-Bit PC CTL-1000-62
The DTK Turbo10-V01 is a full-size 8-bit ISA motherboard designed for IBM PC/XT-compatible computers. Manufactured by DTK Computer (Datatech Enterprises), this board carries the PCB designation CTL-1000-62 and is labeled "Turbo 10" — reflecting its role as a higher-clock-speed XT-class board. It is designed to run an Intel 8088 or compatible processor (such as the NEC V20) and features eight full-length 8-bit ISA expansion slots for adding period-correct peripherals. Onboard DIP RAM modules are installed and present on this board.
Specifications & What's Included
- Manufacturer: DTK Computer (Datatech Enterprises)
- Model: Turbo10-V01
- PCB Part Number: CTL-1000-62
- Form Factor: Full-size XT (PC/XT footprint)
- Bus Architecture: ISA 8-bit
- Expansion Slots: 8x ISA 8-bit full-length slots
- Compatible CPU: Intel 8088 / NEC V20 (CPU not included)
- Onboard Memory: DIP RAM modules installed in memory banks
- Keyboard Connector: 5-pin DIN (visible on board)
- DIP Switch Block: Present for system configuration
- Crystal Oscillator: Visible onboard for clock generation
- FCC Compliance: Marked FCC Class B Computing Device
- Included: Motherboard with installed RAM — no CPU, no cables, no accessories
Applications
The DTK Turbo10-V01 belongs to the PC/XT-compatible motherboard category that dominated the early-to-mid 1980s IBM-compatible PC market. DTK (Datatech Enterprises Co.) was a major Taiwanese manufacturer that produced XT and AT-class clone boards sold under both the DTK name and through numerous OEM channels. XT-class boards like this one were the workhorses of the IBM PC clone industry from roughly 1983 through the late 1980s, running 8088-based software and supporting the vast library of 8-bit ISA expansion cards — including graphics cards, serial/parallel I/O cards, floppy and hard disk controllers, and memory expansion cards. Today these boards are sought by vintage computing enthusiasts, retrocomputing hobbyists, and collectors restoring period-correct IBM PC/XT clones. The eight ISA slots provide ample room to build out a complete 1980s-era PC system.
This DTK Turbo10-V01 XT ISA motherboard has been pulled from a working environment where it was previously in use. It has been visually inspected and photographed. The board appears to be in good used condition overall — the green PCB is clean with no obvious physical damage, cracked traces, or burnt components visible. Onboard DIP RAM modules are installed and present. Normal light oxidation and age-related patina consistent with a vintage board of this era are expected. No CPU is included. Please review all photos carefully and contact us with any questions before purchasing.
Warranty Information
Additional Information
Brand: |
DTK |
Model: |
Turbo10-V01 |
Secondary Model: |
CTL-1000-62 |
MPN: |
CTL-1000-62 |
SKU: |
41022 |
Type: |
Motherboard / System Board |
Form Factor: |
Full-Size XT |
Bus Architecture: |
ISA 8-Bit |
Compatible CPU: |
Intel 8088 / NEC V20 |
Platform: |
IBM PC/XT Compatible |
Expansion Slots: |
8x ISA 8-bit |
Memory Installed: |
Onboard RAM DIP modules installed |
FCC Compliance: |
FCC Class B Computing |
Country/Region of Manufacture: |
Taiwan |
Seller Notes: |
Includes onboard RAM. Board only — no CPU, cables, or accessories included. |
Condition Notes: |
This DTK Turbo10-V01 XT motherboard was pulled from a working environment and has been visually inspected. Board appears in good used condition; DIP RAM installed, no visible damage. No CPU included. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |