Delta Microwave

Delta Microwave SP080-001W-009 WR62 Ku-Band RF Waveguide Variable Attenuator

(No reviews yet) Write a Review
SKU:
33911
Condition:
Used
Availability:
Currently out of stock — contact us for availability.
Weight:
1.00 LBS
Shipping:
Calculated at Checkout
  • Delta Microwave SP080-001W-009 WR62 waveguide variable attenuator sealed in clear plastic bag — front label view showing part number and Delta Microwave branding
  • Delta Microwave SP080-001W-009 WR62 waveguide variable attenuator in clear plastic bag — bottom/reverse angle showing mirrored label with part number
  • Delta Microwave SP080-001W-009 WR62 waveguide variable attenuator — close-up of label showing part number SP080-001W-009, serial number, and rectangular waveguide flanges visible on ends
$35.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

Delta Microwave SP080-001W-009 WR62 Ku-Band RF Waveguide Variable Attenuator

The Delta Microwave SP080-001W-009 is a WR62 rectangular waveguide variable attenuator designed for use in Ku-band microwave systems operating across the 12.4–18 GHz frequency range. Variable waveguide attenuators are passive components used to reduce signal power by a controllable amount within a waveguide transmission line, enabling precise signal level management without introducing significant distortion or impedance mismatch. This unit features standard WR62 rectangular waveguide flanges and is manufactured by Delta Microwave, a US-based specialist in passive microwave waveguide components.

Specifications & What's Included

  • Manufacturer: Delta Microwave
  • Part Number: SP080-001W-009
  • Waveguide Size: WR62 (EIA standard)
  • Frequency Band: Ku-Band
  • Frequency Range: 12.4–18 GHz
  • Attenuator Type: Variable
  • Flange Interface: Standard rectangular waveguide flanges (both ends)
  • Form Factor: Compact inline waveguide component
  • Item is sealed in its original clear plastic bag
  • Attenuator only — no additional hardware or cables included

Applications

WR62 waveguide variable attenuators are standard passive components used in Ku-band microwave and RF test systems, satellite ground station equipment, radar systems, and microwave communication links operating in the 12.4–18 GHz band. Variable attenuators in this frequency range are commonly used to calibrate signal levels in test bench setups, control power levels in transmit chains, and characterize the performance of other waveguide components such as amplifiers, mixers, and filters. WR62 is the EIA standard rectangular waveguide designation for the Ku-band, and components using this waveguide size are widely found in aerospace, defense, and satellite communications hardware from the 1970s through the present day. Delta Microwave has historically supplied passive waveguide components to military, government, and commercial microwave system integrators.

Condition: Used
This Delta Microwave SP080-001W-009 WR62 Ku-Band Waveguide Variable Attenuator is in good used condition. The unit remains in its original clear plastic bag and shows no obvious cosmetic damage. The body and waveguide flanges appear clean and intact as seen in the photos. It was pulled from a working environment where it was previously in use. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Delta Microwave
Model:
SP080-001W-009
MPN:
SP080-001W-009
Type:
Waveguide Variable Attenuator
SKU:
33911
Waveguide Size:
WR62
Frequency Band:
Ku-Band (12.4–18 GHz)
Frequency Range:
12.4–18 GHz
Attenuator Type:
Variable
Waveguide Standard:
EIA WR62
Flange Type:
Rectangular waveguide flange
Form Factor:
Waveguide In-Line
Application:
Microwave / RF Signal Attenuation
Seller Notes:
Attenuator only — no additional hardware or cables included.
Country/Region of Manufacture:
United States
Condition Notes:
This Delta Microwave SP080-001W-009 WR62 waveguide variable attenuator is in good used condition, still in its original clear plastic bag with clean flanges and no visible damage. Pulled from a working environment.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose