Dayton

Dayton 2C820 9" Blower 3" NPT w/5K586B Motor 1/3-HP 115VAC 6.6A 3450 RPM 60Hz

(No reviews yet) Write a Review
SKU:
43706
MPN:
2C820
Condition:
Used
Availability:
Currently out of stock — contact us for availability.
Weight:
100.00 LBS
Shipping:
Calculated at Checkout
  • Dayton 2C820 9-inch centrifugal blower with 5K586B motor — three-quarter front view showing blower housing, motor, and steel base with heavy rust and paint deterioration
  • Dayton 2C820 blower — angled rear-right view showing both 3-inch NPT white fittings (intake and exhaust) and rusted base housing with red residue splatter
  • Dayton 2C820 blower — left side view showing both NPT port fittings, elbow connection, steel base with peeling paint, and power cord trailing from base
  • Dayton 2C820 blower — front-right view showing NPT fittings, blower housing with rust and red splatter, and steel base with power cord visible
  • Dayton 5K586B motor nameplate — shows 1/3 HP, 3450 RPM, 115V, 6.6A FLA, 60 Hz, single phase, sleeve bearing, continuous duty, date code B84 7, Dayton Electric Mfg. Chicago USA
  • Dayton 2C820 blower identification label — shows Model 2C820, Dayton Blower, 9-inch diameter wheel
  • Close-up of bare stripped power cord end — black jacket with green, tan, and black conductors exposed; no plug installed
  • Rear view of steel base housing showing circular blower opening, partial wiring connections, and 90-degree elbow NPT fitting at top
  • Close-up of blower intake opening with tape measure — shows approximately 3.5-inch inner diameter and heavy dark residue buildup on impeller wheel blades
  • Close-up of 3-inch NPT port fitting interior with tape measure — shows approximately 3-inch inner bore diameter with rust and residue visible inside fitting
$134.00
Was: $300.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

Dayton 2C820 9" Blower 3" NPT w/5K586B Motor 1/3-HP 115VAC 6.6A 3450 RPM 60Hz

The Dayton 2C820 is a single-stage centrifugal blower with a 9" diameter squirrel-cage impeller wheel, paired with a Dayton 5K586B split-phase motor for direct-coupled operation. Both the 3" female NPT intake and exhaust ports allow straightforward plumbing into ducted pipe systems. The assembly mounts to a fabricated steel base housing. Both the motor and blower have been tested and confirmed working.

Specifications & What's Included

  • Blower Model: Dayton 2C820
  • Impeller Wheel Diameter: 9"
  • Intake Port Size: 3" Female NPT (approx. 3.5" outer diameter)
  • Exhaust Port Size: 3" Female NPT (approx. 3.5" outer diameter)
  • Motor Model: Dayton 5K586B Split-Phase Motor
  • Motor Reference: SA55BJK-2713
  • Voltage: 115 VAC
  • Full Load Amps: 6.6 A
  • Service Factor Amps: 6.6 A
  • Frequency: 60 Hz
  • Phase: Single Phase (1-Ph)
  • Motor Power: 1/3 HP
  • Speed: 3450 RPM
  • Frame Size: 48
  • Service Factor: 1.0
  • KVA Code: R
  • Duty: Continuous (CONT DP)
  • Bearing Type: Sleeve
  • Max Ambient Temp: 40°C
  • Manufacturer: Dayton Electric Mfg. Co., Chicago, IL 60648 USA
  • Motor Date Code: B84 7 (manufactured 1984)
  • Mounted on fabricated steel base housing
  • Power cord present — bare/stripped end, no plug installed (plug must be added before use)

Applications

Dayton centrifugal blowers of this design are used across a wide range of industrial air-handling applications: exhaust ventilation, fume and dust extraction, oven and dryer exhaust, cooling air supply, and general plant ventilation. The 3" NPT port connections make it straightforward to plumb into standard iron or threaded pipe ductwork. The continuous-duty split-phase motor runs on standard 115V single-phase power, making this type of unit a practical choice wherever a dedicated single-phase blower is needed without three-phase infrastructure. Dayton Electric Mfg. Co. (a Grainger brand) has produced this line of industrial blowers since the mid-20th century; units like this 1984-vintage model were standard equipment in manufacturing, finishing, chemical handling, and HVAC support roles throughout American industry.

Condition: Used
This Dayton 2C820 9" Centrifugal Blower with Dayton 5K586B 1/3-HP Split-Phase Motor has been tested and both the motor and blower are confirmed to be in good working order. The blower impeller and interior have a heavy residue buildup that requires cleaning before use — this is a cosmetic issue and does not affect function. The steel base housing shows significant rust and paint deterioration, and there is red residue splatter across the housing exterior. The power cord end is bare and stripped with no plug installed — a plug will need to be added before connecting to power. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Dayton
Model:
2C820
MPN:
2C820
Secondary Model:
5K586B
Type:
Centrifugal Blower
SKU:
43706
Voltage:
115 VAC
Full Load Amps (FLA):
6.6 A
Power Rating:
1/3 HP
Speed:
3450 RPM
Phase:
Single Phase
Frequency:
60 Hz
Motor Frame Size:
48
Bearing Type:
Sleeve
Duty Cycle:
Continuous (CONT DP)
Service Factor:
1.0
Port Size:
3" Female NPT (approx. 3.5" OD)
Wheel Diameter:
9"
Motor Type:
Split-Phase
Motor Model:
Dayton 5K586B
Motor Reference Number:
SA55BJK-2713
Country/Region of Manufacture:
United States
Seller Notes:
Blower and motor assembly on steel base; power cord bare/stripped — no plug installed
Condition Notes:
Dayton 2C820 Blower w/5K586B Motor — both motor and blower tested and confirmed working. Impeller has residue buildup needing cleaning (cosmetic only). Base housing has rust/paint deterioration. Power cord is bare/stripped — no plug installed.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose