Description
Compaq 199880-001 Half Height Hard Drive Caddy 80-Pin Wide Ultra SCSI 10000 RPM
The Compaq 199880-001 is a half-height hard drive caddy designed for hot-swap SCSI hard drives in Compaq ProLiant server systems. The caddy uses an 80-pin SCA (Single Connector Attach) interface, which combines power and data into a single wide SCSI connector, enabling tool-free hot-swap drive replacement in compatible server bays. A label on the front bezel indicates compatibility with 9.1 GB Wide Ultra SCSI drives running at 10,000 RPM.
Specifications & What's Included
- Part Number: 199880-001
- Interface: 80-Pin Wide Ultra SCSI (SCA)
- Drive Height: Half Height
- Labeled Drive Spec: 9.1 GB Wide Ultra SCSI, 10,000 RPM
- Connector: 80-pin SCA single connector (combines power and data)
- Front panel: Two purple drive handles, green/amber status LEDs, Compaq branding
- Rear: 80-pin SCA SCSI PCB connector, ribbon cable interface
- PCB board with edge connector visible on underside
- Caddy only — hard drive is NOT included
Applications
The Compaq 199880-001 hard drive caddy was used in Compaq ProLiant server systems equipped with SCSI backplane bays supporting the 80-pin SCA hot-swap interface. These caddies allow Wide Ultra SCSI hard drives to be installed and removed from a running server without powering down — a standard feature in enterprise server environments of the late 1990s and early 2000s. They are still sought after for legacy Compaq ProLiant server maintenance, parts replacement, and lab/development environments running original Compaq hardware. The caddy is compatible with server models that accept half-height hot-swap drive modules using the 80-pin SCA SCSI standard.
This Compaq 199880-001 Half Height Hard Drive Caddy has been inspected and is in good condition. The caddy frame, front bezel, purple drive handles, and status LED assembly all appear intact with no significant damage. Normal light cosmetic wear consistent with server environment use is present. The 80-pin Wide Ultra SCSI connector on the PCB appears clean and undamaged. Please note this listing is for the caddy only — no hard drive is included. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
Compaq |
Model: |
199880-001 |
MPN: |
199880-001 |
Type: |
Hard Drive Caddy / Carrier |
SKU: |
42084 |
Interface: |
80-Pin Wide Ultra SCSI |
Drive Height: |
Half Height |
Compatible RPM: |
10,000 RPM |
Compatible Drive Size: |
9.1 GB (labeled on caddy) |
Connector Type: |
80-Pin SCA SCSI |
Form Factor: |
Half Height Hot-Swap Caddy |
Compatible With: |
Compaq ProLiant Server SCSI Drive Bays |
Condition: |
Used – Inspected and in Good Condition |
Country/Region of Manufacture: |
United States |
Seller Notes: |
Caddy only — drive not included. Inspected and in good condition. |
Condition Notes: |
This Compaq 199880-001 Half Height Hard Drive Caddy has been inspected and is in good condition. The caddy frame, front bezel, purple drive handles, and status LED assembly all appear intact with no significant damage. |
