Coherent

Coherent UltraPulse 5000C CO2 Surgical Laser Skin Resurfacing System 1995

(No reviews yet) Write a Review
SKU:
50094
Condition:
Used
Availability:
Currently out of stock — contact us for availability.
Weight:
475.00 LBS
Shipping:
Calculated at Checkout
  • Coherent UltraPulse 5000C CO2 laser system full view with articulated arm, accessory case, handpiece, and documentation
  • Coherent UltraPulse 5000C rating plate showing model number, serial number L55C11 1231, manufactured December 1995, ETL listing, and laser danger warnings
  • Coherent UltraPulse 5000C close-up of model/serial plate: Model ULTRAPULSE 5000C, Serial L55C11 1231, Manufactured December 1995, Coherent Palo Alto CA
  • Coherent UltraPulse 5000C CO2 laser system side view showing articulated delivery arm extended and foot switch on floor
  • Coherent UltraPulse 5000C front control panel showing Mode, Energy/Pulse (300 mJ), Power (2W), Exposure, and Status indicators, with pattern generator module above
  • Coherent UltraPulse 5000C pattern generator reference chart showing 79 selectable beam pattern shapes including dots, hexagons, triangles, ovals, and lines
  • Coherent UltraPulse 5000C articulated arm distal end showing multi-joint elbow assembly and handpiece coupler with focusing optic
  • Coherent UltraPulse 5000C HeNe aiming beam intensity control panel detail with dial and intensity indicator graphics
  • Coherent UltraPulse 5000C front-panel digital display showing 2 Watts and 300 M.I. in STANDBY mode
  • Coherent UltraPulse 5000C upper cabinet with storage drawer open, showing articulated arm mount and laser port at top
  • Coherent UltraPulse 5000C articulated arm assembly showing arm segments, joints, adjustment knob, and storage tray
  • Coherent UltraPulse 5000C lower cabinet with front access panel open revealing internal component bay and filter housing
  • Coherent UltraPulse 5000C rear panel 25-pin DB25 D-sub accessory interface connector
  • Coherent UltraPulse 5000C shielded foot switch pedal in protective metal hood enclosure
  • Coherent UltraPulse 5000C accessory carry case exterior — aluminum travel case with combination lock and handle
  • Coherent UltraPulse 5000C accessory carry case open showing pistol-grip handpiece, lens caps, optics, cleaning brush, and Kodak lens cleaning tissue booklet
  • Coherent UltraPulse 5000C pistol-grip handpiece close-up showing multi-pin circular connector and focusing barrel
  • Coherent UltraPulse 5000C documentation binders — Coherent operator manual binder and UltraPulse Aesthetic Surgery reference binder
$300.00
Was: $3,000.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

Coherent UltraPulse 5000C CO2 Surgical Laser Skin Resurfacing System 1995

The Coherent UltraPulse 5000C is a pulsed CO2 surgical laser system designed for skin resurfacing, ablation, and aesthetic surgical procedures. Manufactured in December 1995 at Coherent's Palo Alto, California facility, this system delivers high-peak-power CO2 laser energy at 10,600 nm through an articulated arm delivery system, with a HeNe aiming beam and an integrated pattern generator for controlled treatment patterns. This is a complete system sold with its original accessories.

Specifications & What's Included

  • Manufacturer: Coherent, Inc. — Palo Alto, CA 94303
  • Model: UltraPulse 5000C
  • Laser medium: CO2 (carbon dioxide), 10,600 nm wavelength
  • Aiming beam: HeNe (helium-neon) with variable intensity control
  • Operating modes: UltraPulse (high-peak-power pulsed) and CW (continuous wave)
  • Exposure modes: Single, 1 Hz, 2 Hz, 5 Hz, Timed, Repeat, Continuous
  • Front-panel display: Power (Watts) and Energy/Pulse (mJ) — display reads 2W / 300 mJ in photos
  • Status indicators: Ready, Laser, Fault, Over Temp, Self Test, Standby
  • Pattern generator module: selectable Pattern, Size, and Density; 79 programmable beam patterns (dots, hexagons, triangles, ovals, linear arrays)
  • Beam delivery: articulated multi-joint arm with distal handpiece coupler and focusing optic
  • Pistol-grip handpiece with focusing lens, in aluminum combination-lock carry case
  • Accessory case contents: handpiece, lens caps, spare optics, cleaning brush, Kodak lens cleaning tissue
  • Foot switch: shielded foot pedal in protective metal hood enclosure
  • Interface connector: 25-pin DB25 D-sub accessory port on rear panel
  • Form factor: mobile floor-standing cart on casters with articulated arm
  • Overall dimensions: 29 × 19 × 78 in. tall (approx. 430 lbs.)
  • Manufacture date: December 1995
  • Regulatory: ETL Listed (Electric Medical and Dental Equipment); complies with DHHS Radiation Performance Standards, 21 CFR Chapter 1, Subchapter J
  • Included documentation: Coherent operator manual binder and UltraPulse Aesthetic Surgery reference binder

Applications

The UltraPulse 5000C belongs to Coherent's UltraPulse family of high-peak-power CO2 lasers, which were among the most widely used surgical CO2 laser platforms in aesthetic and reconstructive medicine from the mid-1990s through the early 2000s. CO2 lasers at 10,600 nm are strongly absorbed by water in tissue, making them effective tools for controlled ablation and resurfacing of skin. The UltraPulse design delivers energy in short, high-peak-power pulses that ablate tissue while limiting residual thermal damage — a key advance over earlier continuous-wave CO2 systems. Clinical applications include full-face and regional skin resurfacing for wrinkles, acne scarring, and sun damage; surgical excision of benign and premalignant lesions; and other ablative dermatologic and plastic surgery procedures. The integrated pattern generator enables physicians to precisely control treatment spot shape, size, and density for consistent coverage. This type of system was commonly found in dermatology practices, plastic surgery centers, and hospital outpatient surgical suites throughout the late 1990s and 2000s, and remains in active use at facilities that maintain and service older CO2 laser platforms.

Condition: Used
This Coherent UltraPulse 5000C CO2 Surgical Laser has been pulled from a working clinical environment where it was previously in service. The unit has not been powered up or tested at our facility. Cosmetically it is in good used condition consistent with clinical service use; the cabinet shows minor surface wear and the articulated arm, handpiece, and accessories appear intact. The front panel displays illuminate (as shown in our photos with the unit in STANDBY), and all major components are present including the articulated delivery arm, pistol-grip handpiece in its aluminum carry case with optics and cleaning kit, pattern generator module, shielded foot switch, and documentation binders. ⚠️ The sale of this item is subject to regulation by the U.S. Food and Drug Administration and applicable state and local regulatory agencies. Do not purchase this item unless you are an authorized purchaser. We will verify your status as an authorized purchaser before shipment. Please view our photo set and contact us if you have any questions.
Medical Device Disclosure
Thanks for your interest. Recycled Goods Inc., Ventura, CA.

FDA Regulation and Certification: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not purchase this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping.

Upon receipt, it is the BUYER'S responsibility to have this instrument checked and certified for use by a qualified Technician prior to placing it into use or service.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Coherent
Model:
UltraPulse 5000C
MPN:
ULTRAPULSE 5000C
Type:
CO2 Surgical Laser System
SKU:
50094
Laser Medium:
CO2 (Carbon Dioxide)
Laser Wavelength:
10,600 nm (10.6 micrometers)
Aiming Beam:
HeNe (Helium-Neon) aiming laser
Operating Mode:
UltraPulse, CW (Continuous Wave)
Exposure Modes:
Single, 1 Hz, 2 Hz, 5 Hz, Timed, Repeat, Continuous
Power Display:
2 Watts (shown on front panel display)
Energy/Pulse Display:
300 mJ (shown on front panel display)
Pattern Generator:
Included — with Pattern, Size, Density controls
Beam Delivery:
Articulated arm with multi-joint delivery system
Handpiece:
Pistol-grip handpiece with focusing lens, in carry case
Foot Switch:
Included — shielded foot pedal
Connector Type:
25-pin D-sub (DB25) accessory interface port
Manufacture Date:
December 1995
Country/Region of Manufacture:
United States
Manufacturer Address:
Coherent, 3270 W. Bayshore Rd., Palo Alto, CA 94303
Regulatory Compliance:
DHHS Radiation Performance Standards, 21 CFR Ch. 1, Sub J
ETL Listed:
Yes — Electric Medical and Dental Equipment
Application:
Skin resurfacing, ablation, aesthetic surgery, dermatology
Form Factor:
Mobile floor-standing cart with articulated arm
Dimensions:
29 x 19 x 78 in. tall
Seller Notes:
Includes articulated arm, handpiece in case, pattern generator, foot switch, accessory binders. FDA-regulated item — authorized purchasers only.
Condition Notes:
Coherent UltraPulse 5000C CO2 Surgical Laser pulled from a working clinical environment; not powered or tested at our facility. Includes arm, handpiece, pattern generator, foot switch & docs. FDA-regulated — authorized purchasers only.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose