C & C Die Engraving

C&C Die Engraving 72T Label Cutting Rotary Die .550x4.270 13in Shaft-to-Shaft

(No reviews yet) Write a Review
SKU:
34355
MPN:
72T
Condition:
Used
Availability:
Usually ships within 1-2 business days.
Weight:
17.00 LBS
Shipping:
Calculated at Checkout
  • C&C Die Engraving 72T label cutting rotary die shown with original cardboard box on wooden support blocks
  • Close-up of embossed C&C Die Engraving brand logo on the rotary die roll body
  • Close-up of machined cutting pattern channels and grooves on the rotary die roll surface
  • Embossed designation .550X4.270 stamped on the rotary die roll body surface
  • Embossed markings 72T and D2 visible on the rotary die roll body
  • C&C Die Engraving 72T rotary die laid alongside tape measure showing approximately 13-inch shaft-to-shaft length
  • Side view of rotary die with tape measure confirming full length including drive gear and shaft ends
  • Close-up of drive gear end of rotary die shaft with tape measure showing approximately 3/4-inch shaft diameter
  • Caliper measurement of rotary die shaft end showing shaft and roll dimensions from the gear side
  • Caliper measurement of opposite shaft end of the rotary die confirming shaft diameter and roll dimensions
  • C & C Die Engraving 72T Label Cutting Rotary Die
  • C & C Die Engraving 72T Label Cutting Rotary Die
  • C & C Die Engraving 72T Label Cutting Rotary Die
  • C & C Die Engraving 72T Label Cutting Rotary Die
$62.00
Was: $170.00
Current Stock: 1

Sold Out

Description

C&C Die Engraving 72T Label Cutting Rotary Die.550x4.270 13in Shaft-to-Shaft

This is a rotary die used in label cutting and die-cutting operations on label press equipment. The 72-tooth hardened steel die cuts materials as they pass through a compatible press system.

Specifications & What's Included

  • Brand: C&C Die Engraving | Model: 72T
  • Type: Label Cutting Rotary Die (D2 designation)
  • Dimensions:.550 x 4.270 inches (die face)
  • Overall length (shaft-to-shaft): 13 inches
  • Roll body length: 8-3/8 inches
  • Roll diameter: approximately 2-3/4 inches
  • Shaft diameter: 3/4 inch
  • Integral spur gear on shaft end for drive coupling
  • Original box included

Applications

Rotary dies of this type are used in industrial label converting and finishing operations. They mount into compatible rotary die-cutting presses where they work in tandem with anvil or counter-dies to cut label stock, film, and similar materials. C&C Die Engraving dies are standard components in many mid-sized label production systems and are commonly found in converting shops and label manufacturing facilities.

Condition: Used
This C&C Die Engraving 72T Label Cutting Rotary Die has been inspected and is in good used condition. The roll body and cutting channels are intact with no visible damage. The shaft ends and drive gear show typical handling wear consistent with prior use. The original box is included as shown in the photos. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
C&C Die Engraving
Model:
72T
MPN:
.550X4.270
Type:
Label Cutting Rotary Die
SKU:
34355
Tooth Count:
72T
Die Designation:
D2
Die Dimensions:
.550 x 4.270
Overall Length (Shaft to Shaft):
13 inches
Roll Body Length (no shafts/gear):
8-3/8 inches
Roll Diameter:
approx. 2-3/4 inches
Shaft Diameter:
3/4 inch
Drive Gear:
Integral spur gear, visible on shaft end
Material:
Steel / hardened tool steel construction
Application:
Label cutting / die cutting for label press
Condition:
Used – Inspected and in Good Condition
Seller Notes:
Die only; original box included as shown in photos
Condition Notes:
C&C Die Engraving 72T label cutting rotary die. Inspected and in good used condition. Roll body and cutting channels intact, shafts and gear show normal use wear. Original box included.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose

Related Products

Related Products

Stainless steel knife ring slitter showing outer stainless body, inner black groove ring, and flange base — three-quarter view Top-down view of knife ring slitter with metric ruler showing approximately 150mm outer diameter measurement
Add to Cart
Quick view

Stainless Steel Knife Ring Slitter 5.906" OD x 4.0005" ID x 1.575" Slitting

Generic

$150.00
Was: $325.00
Stainless Steel Knife Ring Slitter 5.906" OD x 4.0005" ID x 1.575" Slitting GrooveThis is a stainless steel knife ring slitter with a precision-machined slitting groove, measuring 5.906" outer...
51768
SKU:
51768
Availability:
Usually ships within 1-2 business days.
Weight:
12.00 LBS
Brand:
Unbranded
Model:
5.906 OD x 4.0005 ID x 1.575 Slitting Ring
Type:
Knife Ring Slitter
Material:
Stainless Steel
Outer Diameter (OD):
5.906"
Inner Diameter (ID):
4.0005"
Thickness:
1.575"
Features:
Slitting Groove
Application:
Web Slitting, Film, Paper, Foil, Converting
Condition:
Used – Inspected
SKU:
51768
Seller Notes:
Inspected and in good condition. No brand markings visible.
Condition Notes:
Stainless steel knife ring slitter, 5.906" OD x 4.0005" ID x 1.575" thick. Inspected and in good used condition. Slitting groove intact. Minor surface marks from prior use possible.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
47-inch heavy-duty industrial press roll with four circumferential banding rings, resting on a wooden pallet — full length side view Close-up of the shaft end of the industrial press roll showing the toothed timing belt drive pulley and bearing journal
Add to Cart
Quick view

Heavy Duty Industrial Press Roll 47" 545 LB Bottom Ring Slicer w/ Drive Pulley

Heavy Duty

$550.00
Was: $1,100.00
Heavy Duty Industrial Press Roll 47" 545 LB Bottom Ring Slicer w/ Drive PulleyThis is a heavy-duty industrial press roll and bottom ring slicer measuring 47 inches in length and weighing...
52118
SKU:
52118
Availability:
This item requires freight shipping. Contact us for a shipping quote or to arrange local pickup.
Weight:
545.00 LBS
Brand:
Unbranded
Model:
Press Roll 47in
Type:
Industrial Press Roll / Bottom Ring Slicer
SKU:
52118
Overall Length:
47 inches
Roll Diameter (approx):
10 inches
Overall Dimensions:
47" x 10" x 10"
Drive Interface:
Toothed timing belt pulley (shaft-mounted)
Shaft End:
Keyed/splined shaft with toothed drive pulley
Ring/Band Configuration:
4 circumferential banding rings on roll body
Roll Body Material:
Black polymer/composite sleeve over metal core
Application:
Press roll, ring slicing, manufacturing production line
Condition:
Used – Inspected, appears in good condition
Seller Notes:
Unit on wooden pallet; freight shipping required
Shipping Notes:
Freight shipping required — contact seller for quote
Condition Notes:
This 47" industrial press roll / bottom ring slicer has been inspected and appears to be in good condition. Light surface wear present; drive pulley and shaft intact. Requires freight shipping. Contact us for a quote.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
Tidland 133508 bottom knife slitting ring – angled top view showing Tidland logo and part number engraved on outer surface Tidland 133508 slitting ring – top-down view showing inner bore, O-ring groove, and HCHC steel body
Add to Cart
Quick view

Tidland 133508 Bottom Knife Slitting Ring 5.906" OD x 4.0005" ID x 1.575" HCHC

Tidland

$200.00
Was: $400.00
Tidland 133508 Bottom Knife Slitting Ring 5.906" OD x 4.0005" ID x 1.575" HCHCBottom knife slitting ring for web converting and slitting machinery. Manufactured from ABS X3 HCHC wear-resistant tool...
51764
SKU:
51764
Availability:
Usually ships within 1–2 business days.
Weight:
8.00 LBS
Brand:
Tidland
Model:
133508
MPN:
133508
Type:
Bottom Knife Slitting Ring
SKU:
51764
Material:
ABS X3 HCHC Wear-Resistant Tool Steel
Outer Diameter (OD):
5.906 in
Inner Diameter (ID):
4.0005 in
Thickness:
1.575 in
Application:
Web Converting, Slitting Machinery
Country/Region of Manufacture:
India
Condition:
Used – Inspected and Pulled from Working Environment
Seller Notes:
Ring only; inspected and in good condition.
Condition Notes:
Tidland 133508 bottom knife slitting ring. Inspected, in good used condition. Light surface wear; no visible cracks or damage to cutting surfaces or bore. O-ring groove intact. Please contact us with questions.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov