Cable

Multi-Tech PM Style RJ-11 to DB9 Serial Cable 4-Wire Telephone Modem Cable

(No reviews yet) Write a Review
SKU:
16649
Condition:
Used
Availability:
Currently out of stock — contact us for availability.
Weight:
1.00 LBS
Shipping:
Calculated at Checkout
  • Multi-Tech PM Style RJ-11 to DB9 serial cable coiled, showing full cable length with DB9 male connector and RJ-11 end
  • Close-up of RJ-11 connector end showing 4-wire colored contacts inside clear plastic housing
  • Close-up of DB9 male 9-pin connector showing 6 populated pin positions on the Multi-Tech PM style serial cable
$25.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

Multi-Tech PM Style RJ-11 to DB9 Serial Cable 4-Wire Telephone Modem Cable

This is a Multi-Tech PM Style adapter cable that converts a 4-wire RJ-11 telephone connector to a 9-pin DB9 serial (RS-232) connector. It is designed for use with Multi-Tech PM series modems and similar devices that use this wiring configuration to bridge a telephone line interface to a standard serial port.

Specifications & What's Included

  • Cable style: Multi-Tech PM Style
  • Connector A: RJ-11 (4-wire telephone)
  • Connector B: DB9 Male (9-pin serial)
  • Number of wires: 4
  • DB9 pin wiring: 6 pins used — 4 wired directly to signal pins, 2 wired to an internal resistor
  • Interface: RS-232 serial
  • Cable jacket: Gray flat/round hybrid telephone-style cable
  • Includes: Cable only

Applications

This cable type is used to connect Multi-Tech PM series external modems and similar telephone-interface devices to a computer's RS-232 serial port. The PM (Phone Modem) series from Multi-Tech Systems used proprietary RJ-11-based connectors for their telephone interface, and this cable provides the correct pinout and termination — including the resistor on two of the DB9 pins — required for proper signaling. Cables of this type are still sought after by users maintaining legacy Multi-Tech modem installations, older telecommunications equipment, and serial-based remote access setups from the 1990s–2000s era.

Condition: Used
This Multi-Tech PM Style RJ-11 to DB9 Serial Cable is in good used condition with normal handling wear. The cable is intact with no visible cuts or kinks, and both connectors — the RJ-11 telephone end and the DB9 serial end — appear clean and undamaged. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Multi-tech
Model:
PM Style Cable
MPN:
PM Style
SKU:
16649
Type:
Telephone to Serial Adapter Cable
Connector A:
RJ-11 (4-Wire)
Connector B:
DB9 Male (9-Pin)
Number of Wires:
4
Wiring Configuration:
6 pins used: 4 wired to pins, 2 wired to resistor
Interface:
RS-232 / Serial
Compatible With:
Multi-Tech PM Series Modems
Cable Style:
Multi-Tech PM Style
Country/Region of Manufacture:
United States
Condition Notes:
This Multi-Tech PM Style RJ-11 to DB9 serial cable is in good used condition. Both connectors are clean and intact with no visible damage. Normal handling wear only. Please view our photos and contact us with any questions.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose