Description
RF Radio Frequency Load Black Finned Heatsink Body N-Type Coax Connector As-Is
This is an RF dummy load (resistive termination) with a black anodized finned aluminum heatsink body and an N-type coaxial connector. The finned heatsink construction is typical of medium- to high-power RF loads used to absorb RF energy and dissipate it as heat during testing and calibration work. No manufacturer markings are visible on the unit.
Specifications & What's Included
- Type: RF Dummy Load / Coaxial Termination
- Connector: N-Type coaxial
- Body: Black anodized finned aluminum heatsink
- Connector/cable area: wrapped in aluminum foil tape (likely a prior repair — see photos)
- No brand, model, or power/impedance rating markings visible on the unit
- Impedance: likely 50Ω (standard for N-type RF loads — not confirmed from markings)
- Sold as-is, no accessories or cables included
Applications
RF dummy loads are standard components in radio frequency test and measurement setups. They are used to terminate a transmission line or transmitter output with a matched impedance load — absorbing RF power without radiating a signal — allowing safe testing of transmitters, amplifiers, and RF circuits. The finned heatsink body on this style of load allows it to dissipate heat generated by absorbed RF power, making it suitable for continuous or higher-power duty cycles. These loads are commonly used in amateur radio, telecommunications equipment servicing, broadcast transmitter maintenance, and RF lab environments. They are connected in place of an antenna to allow a transmitter or amplifier to be operated without broadcasting.
This RF Radio Frequency Load is being sold as-is for parts or repair. No testing has been performed on this unit at our facility and no functionality is guaranteed. The unit shows notable condition issues: the coaxial connector and cable section are wrapped in aluminum foil tape, suggesting a prior repair or physical damage to the cable jacket or connector area — buyers should inspect this carefully before use. The black finned heatsink body appears intact with normal handling wear. Please review all photos closely and contact us with any questions before purchasing.
Warranty Information
Additional Information
Brand: |
Unbranded |
Model: |
RF Coaxial Dummy Load |
Type: |
RF Dummy Load / Termination |
SKU: |
32950 |
Connector Type: |
N-Type (N Female/Male coaxial) |
Body Style: |
Finned Aluminum Heatsink |
Color: |
Black |
Seller Notes: |
Load only — no additional cables or accessories included. |
Form Factor: |
Inline / Coaxial Body |
Application: |
RF signal termination, test and measurement, transmitter testing |
Condition Notes: |
This RF Dummy Load is sold as-is for parts or repair. Not tested — no functionality guaranteed. Coax connector area is wrapped in aluminum foil tape, suggesting prior repair or damage. Heatsink body appears intact. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |
